Spigen for Google Pixel Watch 5/4/3/2/1 45/41mm Band with Case

Honestly, if you're looking for the ultimate way to protect your wrist setup, this Spigen case and band combo for the Pixel Watch 4 is 100% the best watch protector you can buy. It is absolutely stylish and gives the watch a rugged, tactical look that looks really, really cool. It’s made of a heavy-duty matte plastic armor that completely wraps around the watch head with straps already attached, so the whole thing functions as a single, rock-solid unibody rig. For how inexpensive this setup is considering the elite quality you get, it is just an absolute steal and comes highly recommended. ​This thing is insanely durable, and I've put it through the ultimate ringer at work. I've accidentally banged it directly against hard walls and smacked it right into sharp metal counters, and it holds up perfectly fine every single time without a scratch. The engineering on it is great because it has a perfectly raised lip surrounding the screen. If the watch ever slips out of your hand and drops onto the floor, or if you slam the side of your wrist into equipment, the raised border absorbs the entire impact so your actual watch crystal stays totally pristine. It is a totally durable, rock-solid, elite protector. ​The fit on this thing is spot-on, and Spigen did a fantastic job with the strap mechanics on the back where you hook it through and fasten it. The piece that the band slides through locks down completely solid—the buckle pins click perfectly into the holes when you fasten it, so the extra slack isn't flimsy or moving around loosely while you're working your shift. On top of that, it even comes with a super handy charging stand that fits right over your factory magnetic puck charger to keep your nightstand clean. If you're on the fence about getting a protective setup for your watch, you must get this one—it's cheap, looks totally cool, and keeps your tech 100% safe.

The watch fit very snug in the hoder and the buttons are operable. The rotation knob is a bit hard to access but it is doable. I work in construction so i liked the protection offered and it is comfortable for all day wear. The strap keeper broke within the standard warranty period as noted in other reviews. I emailed Spigen to have it replaced as other reviewers have and they responded that since I bought 'like new' they will not offer a waranty replacement. Their web site does nor does the amazon product page indicate that the waranty is different. I dug deep into the 'Fulfillment by Amazon' page as well and found this - Product Warranties - Please contact the manufacturer directly for product registration and warranty-related information. A manufacturer warranty may not cover used products offered on Amazon.com. Review the manufacturer warranty details on the product detail page for coverage or contact the manufacturer directly. Again nothing on the Spigen website. I would expect an update soon. Good band for the money tho.

I say if you're not a fan of the regular snap on watch cases or just band options, this may be a worthwhile upgrade case for your Google Pixel Watch. I'm current using this case on a 41mm Pixel Watch 1, I bought this Spigan Watch Case/Band to try out something different for my watch. This is a nice case, fits the watch nicely, You have access to your dial and function buttons, and the case is also comfortable on the wrist. The Black color makes it easy to accessorize with. It's compatible with all the 41mm Pixel Watches as this is the upgraded case/band. Also the price is right. And it doesn't snag on anything. As for the cons, it's not as rugged IMO as the Supcase Unicorn Beetle case/band. I feel the screen is still very exposed and subjected to get scratched or dinged up if you brush against something. Thickness is moderate compared to other cases on the market. Overall, I think this is a good case, and I recommend it, especially to add a bit of hefty to a already tiny watch, especially if you have the 41mm watch.

Nice band, fits well and protects the watch nicely. The charging stand is a great addition. Easy to put on watch face and charger. Watch connects to charger without issue. Good value. Adjusts to wrist for a nice fit.

So I bought this not long after the Pixel Watch 2 was released. At first it wasn't confirmed if it would fit but then it was updated that it would, so I pulled the trigger. I have used Spigen brand cases for all of my phones going back to the Samsung Galaxy 5 or so. Their products work great and this case and band are equally as awesome. I'm a klutz. Seriously, I bang my wrist against walls as I'm walking around corners. It's really terrible. As such, I needed something that would protect my watch. Knowing how great their phone cases were, I went with the Rugged Armor Pro. It has a TPU protector for the screen that does not interfere with the touch controls at all, so that was a relief. The whole assembly is like a band and frame all in one. You pop the watch body into it from the back and you have this great rubberized body and comfy band. Let me tell you, this thing has protected my watch from my clumsiness countless times. It takes a ton of abuse and is still in great shape. So recently the little clip that holds the excess band cracked. I reached out to customer support about it - I have a whole new one on the way. No questions asked. I told them what happened, they support their product! Customer support is first class with Spigen. I know this sounds like I'm a shill or something, but I forget to leave reviews a lot and the issue I had just happened and I was so thoroughly impressed with the customer support that it reminded me to tell other people about it. Buy Spigen. For real. The products are great, including this one. The customer service is the best out there. I even told them that I have been a customer for years and after that experience, I will continue to be, because they check off every box. I am so happy with this purchase and with the company.

I've had this case on my Pixel Watch 4 for a couple of months now and I'm very happy I purchased it. I've banged the watch on walls, my desk, countertops, door handles (yes, I bang into things quite often), and it has protected the watch wonderfully. It has a rugged look which I prefer over the sleekness of the watch itself. I also prefer the watch band that comes with this case over the stock band that came with the Pixel Watch 4. I'm sure the Spigen band will wear out eventually and need to be replaced. When that day comes I will gladly buy this case again if it is still available.

Worked and looked amazing until today when it cracked and broke. Three stars because it was great but completely broke today.

This is a solid piece of work. Getting the watch to align with the base is a little tricky since the charging contacts are receeded into the band, but once it's onthe base, it stays put. One thing is live is to be able to buy extra charging bases without buying a new band as well.

Pixel Watch2用に購入。2には対応してないと説明欄にあったが問題なくフィットした。バンドとケースが一体型なので装着も簡単で、全体をしっかり守ってくれるのがありがたい。TPUとPCの二重構造で、衝撃にも強そう。見た目は少しゴツめだが、スポーティーな印象でこれはこれでアリ。タッチ操作や充電にも支障はなく、実用性は高い。耐久性を求めるならかなりおすすめできる一品。

This is one of those times I wish I could leave 4.5 stars. I do really like Spigen products and I like this. My problem was that the strap clips on my pixel watch 3 had worked loose. Even new straps would come off too easily. This fixes that problem well. Pros: - The all in one case and strap is robust. The straps are fixed and can't work loose - Strap is secure and the fastening won't slip easily (I've had previous watches stolen from my wrist) - Solid design that will absorb plenty of hard impacts and give good protection Cons: - integrated strap means it is not reversible. I wear mine the other way around but I'll get used to it - perhaps a bit too chunky. Doesn't fit well under a shirt cuff. I have their tough cases for my phone and that smoother design suits me better rather than the big lumps this has

sono soddisfatto. ho un pixel watch 2 e con il cinturino originale risultava moto esposto agli urti e soprattutto con un look delicato. questo cinturino si adatta perfettamente e lo rende adatto a tutti i giorni sport e lavoro compreso. il quadrante calza perfettamente e non si muove. La corona è leggermente meno accessibile, ma non la uso molto quindi è un problema secondario. la uso solo come pulsante e su questo la funzionalità è identica. il tastino diventa più duro, ma anche in questo caso lo uso pochissimo. Per quanto riguarda il cinturino è molto molto lungo. considerando che sono alto 182 e ho una corporatura normale (75kg) per calzarlo aderente lo stringo fino al quartultimo foro. ne rimangono 7 per allargarlo. quindi per chi ha il polso grande nessun problema, ma potrebbe essere troppo grande per bambini o ragazze con i polsi piccoli.

Wer sich die große Pixel Watch 4 gönnt und sie aktiv beim Sport oder im Alltag nutzt, will das gute Stück natürlich auch optimal geschützt wissen. Die Spigen Rugged Armor Pro ist dafür genau die richtige Rüstung. Wer den filigranen Look der nackten Uhr opfern kann, um dafür maximalen Schutz beim Sport und eine geniale, stabile Dockingstation fürs Laden zu bekommen, macht hier absolut alles richtig. Schutz & Passform: Die Hülle umschließt die Uhr perfekt. Der angehobene Rand schützt das Display zuverlässig vor Kratzern und Stößen, ohne dass die Bedienung der Krone oder des Touchscreens eingeschränkt wird. Das Gehäuse wirkt extrem robust. Typisch Spigen. Die Uhr sitzt gut. Für meine schmalen Handgelenke ist das Armband beinahe einen Ticken zu lang, lässt sich aber super fixieren. Der erste Eindruck, dass das Armband etwas hart ist, legt sich schnell. Es sitzt gut und wird auch schnell sehr angenehm zu tragen. Das Lade-Feature): Ein absolutes Highlight, das man auf den ersten Blick gar nicht so auf dem Schirm hat: Das originale Google-Ladekabel lässt sich einfach unten in den Fuß des mitgelieferten Ständers einstecken. Dadurch verwandelt sich das Ganze im Handumdrehen in einen stabilen Ständer für den Nachttisch oder Schreibtisch. Die Uhr steht absolut sicher, wackelt nicht und lädt einwandfrei. Ein extrem durchdachtes Detail! Design & Tragekomfort: Das Design ist sportlich-markant und passt hervorragend zum ohnehin schon präsenten 45-mm-Gehäuse. Aus der eleganten Smartwatch wird so ein robuster Outdoor-Klassiker. Trotz der massiven Optik trägt sich das Armband überraschend angenehm am Handgelenk und schwitzt sich auch beim intensiven Workout nicht unangenehm. Das Design muss man mögen. Aber wer es nicht mag, wird es auch nicht kaufen. :) Pro: Überragender Stoß- und Kratzschutz für das Gehäuse Integrierte, super praktische Standfunktion für das originale Ladekabel Sehr gute Passform und angenehmer Tragekomfort Contra: Macht die ohnehin große 45-mm-Uhr natürlich noch ein Stück wuchtiger

Product fits well on the Pixel Watch 2. Ample protection. Comfortable to wear for long periods throughout the day.