1 x 150ml White Anti Slip Shower Tray and Bath Paint

Good product

Really easy to apply. I applied 3 coats in total allowing 4 hours between each coat giving it a good stir before and during applying it to ensure the particles in the paint were evenly distributed. I then allowed it to cure for 48hrs before I used the shower. I'm really impressed with the coverage and the feel of it under foot.

I have applied this paint a number of times over the years. It certainly goes on easy (I used. Brush)and is definitely non- slip.The only down side being. It is very expensive for such a small amount.

Our slip proof shower tray was looking old . This has made it look brand new saving a lot of money

I have used this product before on my shower tray which looks as good as new, I had some left so hot another and I'm having a go at a bath now

Although the tin is very small, the paint is good for shower basins. Tip - make sure you have some spirits for the paint brush for cleaning. The paint won't wash of the brush with ordinary soap.

It’s ok but because of the grit in it hair,fluff and other bits of stuff won’t wash away,it gets stuck.One little can will give you two coats,so if your shower tray isn’t white then you’ll need two cans,my tray was a beige colour and I had to give it four coats.When applying use a emulsion mini sleeve and not a sponge one because of the grit in it.It says it’s white but when dry it’s almost like an off white.

When applied with a gloss roller to a masked-off area the finish is excellent but the non slip properties are less than the original finish on owr shower tray.