🔌 Power Up Your Outdoors with Confidence!
The QTEATAK Inline Cord Switch is a robust, heavy-duty toggle switch designed for high-power applications, featuring an impressive 20A rating and IP66 waterproof protection. Made from premium materials, it ensures durability and safety, making it perfect for outdoor use in various electrical setups.
D**.
needs wire diagram
good setup, but for new guys to wiring it needs a diagram
D**.
Nice switch, but there is one issue.
The switch is well made, waterproof, and very attractive. The one issue with this switch is that the terminals that you connect a solderless connector to are EXTREEMLY small. The connectors are made for solderless connectors around the 18-gage size or smaller. You have to smash your connectors and bent out the tangs on this switch to fit a 12 or 14 gage terminal connector to it. Otherwise, this is a really nice switch.
M**G
Minus 1 star: it comes with no instructions. Here's what you need to know.
This appears to be a decent water proof switch, although I haven't tested its resistance to water.• It comes with no instructions.• If you connect the hot wire to the zero side of the switch, it will only glow when power is applied. If you connect the hot wire to the one, it will always be lit.• Connectors are small. It says it’s rated for 20 amps, but I wouldn’t want to put anything more than 16 gauge wire on those connectors.• Getting anything bigger than 16/3 gauge wire through the external connectors would be difficult.• It’s only two poles, so if you’re using 3 wire, you must wire the grounds together inside the box• Having two open end ¾ inch open end wrenches is handy for cleanly tightening the outside nuts• Tightening the inside nuts is difficult. I used two flat blade screwdrivers to hold the inner nut in place
C**L
Good product
Easy to install and use. Very waterproof
J**H
Switch box was unable to handle heavy gauge wire.
The switch is of good quality. The application I wanted to use it for just didn't work out. But I would buy it again for a different project.
W**D
Great high quality switch set
This worked perfect for me. The dual switches are exactly what I needed. They are very easy to hook up. Very high quality.
P**Y
Good for switching high-amp devices. IP66 means it's also dust proof.
These are DPST switches; this means each switch can control both hot and neutral on a 120V circuit, and both hot leads on a 220V circuit. Choosing a double-pole switch such as these is a good safety precaution, especially when used with 220V. I’m using one switch to control a table-mounted woodworking router and the other for controlling its dust-vacuum system. Both the router and vacuum are relatively high-amp devices. The switch assembly is IP66-waterproof rated. This means it’s also dust proof, which is something necessary for where I’m using it. The switch was easy to install, and works well. The wire connectors looked a bit small, but accommodated 12-gauge wires without problems. I routed the ground wires in so they can be connected together inside the box. It was a tight fit. It would have been a lot easier if the box was a bit larger.
G**Y
High quality product!
I like the quality of its parts and its ensemble, also the impermeability of the connections and the product is very goo
Trustpilot
1 month ago
1 day ago