J-B Weld 8267UK SteelStik Epoxy Putty, dark grey

I've used various liquid metal and epoxy repair products over the years, but this SteelStik is one of the easiest to work with. Being a putty rather than a liquid, it's much simpler to mould, shape, and press into place, especially when repairing awkward shapes or filling gaps.Once mixed, it has a good working time and can be formed exactly where it's needed without running or dripping. After curing, it becomes extremely hard and feels very strong and durable.I've used it for automotive repairs and general workshop jobs where a strong metal-like repair was needed, and it's performed very well. It's particularly useful when you need to rebuild small areas, fill damaged sections, or make repairs that would be difficult with traditional liquid metal products.Overall, a versatile and very strong epoxy putty that's easier to use than liquid alternatives while still providing an excellent repair. Highly recommended

This is a great find. It’s super easy to use and works exactly as described.

Does what it says on the tin, very strong in itself but it's ability to bond to metal is questionable. It stayed attached for 2-3 months and then fell off.

Really good stuff, easy to apply. I bought it for a radiator that had a dent and a large chip in it. Applied the putty waited an hour and sanded. Looks great, can’t see the repair. Tip, when applied use a wet finger to smooth the putty out, it’ll save a lot more sanding👍

J weld products are very good, would not hesitate to buy again, sometimes seen cheaper but Amazon quick service wins the convenience award. There are a lot of JWeld adhesives check the details and buy the right one.

For anyone familiar with 2 part epoxy putty, the principle is no different here, the application and end results are similar, however this is alleged to have steel re-enforcement. It certainly done the job for sealing crack in a weld joint, just after the catalectic converter on my Honda Jazz .. The temps on my exhaust probably do exceed that of the putty ( I think maybe 300-400 degrees Celsius. However despite this, after 60 miles the putty has held up.It is easy to work with and goes like a malleable play do texture and hardens to rock within around 10 minutes, Just make sure to prepare surfaces well by brushing with wire brush or wool. mixAccording to my research this does the job on most exhausts after the catalytic converter and can last for up to two years depending on use and conditions. It is not recommended to apply before the cat, as that will be too hot .

I bought this to fix some poorly welded struts on my kids metal frame bed which had snapped. Application was very easy, just cut as much as needed off (it is covered in plastic, but it cuts very easily), knead it and then apply like putty. Just use as much as you need to for the moment though, because I cut off enough for two jobs and the bit I'd set aside for the 2nd part was already setting and difficult to use in the minute or so I had applied the first... it starts setting immediately!It set very well, completely rock solid. I had honestly expected that it did the job perfectly.Unfortunately it only lasted a day... the next day it had cracked and broken (the first job, I redid the 2nd with fresh because I couldn't use the original bit). It clearly couldn't handle the compression and tension of just normal usage on the bed, which probably explains how/why the original welds broke? Maybe?In either case, I'm not completely happy as it didn't do what it was supposed to, but I can imagine in other scenarios where it's not under changing loads and demands, it might work better.

Excellent- easy to use and works well

We had a radiator leak from top and when we took it off the wall, we saw it was leaking from bottom.received this and applied to the top and botom and works absolutely well. and it heats the same level.This product can easily be used for products reaching as high as 150 degree heat. Very impressive loved it.

Muy buen producto para reparar hierro (en mi caso), destacanto su fácil usabilidad. Una vez que elaborar la mezcla hay que utilizarla rápidamente para que no se endurezca, o seguir mezclando para mantenerlo blando, es el único punto muy a tener en cuenta. Tiene una gran resistencia una vez secado, pudiendo lijar encina si hace falta. Muy revomendable.

Well written instructions that is easy to follow. Easy to apply. After about 6 weeks, I do not detect any evidence of any more leaks. Looks like it has worked well.

Was skeptical about this stuff but WOW it really works. I managed to get a nasty cut in one of my tire stems from having to saw off a stuck metal cap which caused it to start leaking air and made it impossible to fill the tire. Decided to order this stuff on a whim in an attempt to save on a costly repair or replacement and I couldn't be more pleased with the results. I shoved a little piece into the gash and let it cure for a day and my problem is completely fixed! Tire has stopped leaking air and fills normally now and the patch feels totally solid, amazing product for real.

Solid and reliable