TAC Side Steps Compatible with 2009-2018 RAM 1500 Crew Cab | 2019-2023 Classic RAM 1500 Crew Cab | 2010-2024 RAM 2500/3500/4500/5500 Crew Cab Pickup Truck 3" Stainless Steel Running Boards 2Pcs

Looks great, great quality.

I ordered these for my 2018 Ram 1500 Hemi crew cab (4 equal size doors). The directions are pretty clear once you crawl under the truck and see what tha manufacturer is describing. Like several other people, I was missing a couple lock washers. Being in industrial maintenance, I am always coming home with a nut, bolt, or washer in my pocket. Just had to look in my little stash to find what I needed. The rear mounts were super easy to install. The front was a different story. On the passenger side, I had to fish one bolt through the frame. A bit of a hassle but not too bad. An angle bracket bolts from the front mount to the body bolt. I tried to use an impact gun to remove the body bolts but no luck. Had to put a 19mm socket on a breaker bar to get it loose. Once the angle bracket was in place, I installed the step bar. Be forewarned, do not tighten anything until all bolts are in place. I used my impact to tighten the bolts that held the bar to the mount and the body bolt. Everything else had to be done with a ratchet. Just not enough room for my impact. The drivers side was a different story. The fish wire was about six inches too short to make the reach. I ended up having to leave that one bolt out. Still, once everything was tighten up, it was as solid as a rock. My 215 pounds didn’t move it at all. I think they look pretty darn good. I have 39 years experience in industrial maintenance under my belt with most any tool that I have ever needed. The first bar took me about 45 minutes to install. Mostly from trying to figure out what bolt went where. The second one only took about 25 minutes. About 5 minutes of that was the confusion about having to leave a bolt out. The steps look great on my wife’s truck. Yep, it’s hers! I wouldn’t hesitate to recommend these to anyone.

I think my review will follow suit with the majority of the others on here: (2018 Ram Crew Cab) The product quality is pretty good. It is a very light-weight metal so I am not sure yet how durable it is, but I stood my 280lb body on it and it supported me just fine. The install instructions are fine, if you are able to 'read' directions without much picture support. I usually prefer a solid set of directions with pictures to mimic the written directions, but I was able to get through install by being patient and re-reading many times as I went along. The body bolt removal was a pain. I had to go to the local Auto Zone and pick up a breaker bar and a metric socket. My truck is new, so the bolt wasn't too hard to remove with the breaker bar, although I could see it rusting and causing a problem later. It took me about 2 hours to work through the instructions and install the driver side, and then once everything made sense, the passenger side took about 25 minutes. I couldn't find any install videos for this specific nerf bar, so keep that in mind if you feel you might need internet support. Once installed they look great.

Great fit, easy installation (once you get the old ones off), and greatly improves the overall look of my truck.

Install was a bit hard but everything came together nicely and you can’t beat the price. Happy with product

2013 dodge 2500. Had to modify 4 holes in the body of the truck to make these fit. And had to provide about half a dozen washers and lock washers. Instructions were not clear at all, and had to make it fit via trial and error.

I wanted to downgrade this review because of their use of USPS to deliver them but I decided that was petty. It was an issue, however. They were shown as one day delivery and they did not even "attempt" delivery until the second day. I am pretty sure the attempt was just to look at the box and decide they didn't want to deal with it. I was home when they said they attempted delivery and I did not hear or see them. The box is about 8 feet long and a little heavy. But I was able to go on line and say I wanted to pick them up at the local post office and I got the the next morning. So 3 days. But the bars were packaged well and seem sturdy and well designed, especially for the price. I did not understand at first that they mount with a 1/2 inch bolt in each end going into brackets bolted to the frame of the truck. The brackets are made of steel more than 1/8 thick and have gussets to help them be stiff. The 3 inch tubes are not terribly heavy but seem heavy enough to support anybody. I see very little flex when I put my 200 lbs on them. I have no concerns. I also like the fact there is some space between the bar and the truck so you can get your foot on it. I don't really need the bars but my daughter in law wanted them and I noticed a shorter guy I gave a ride struggled a little. Seems like a good deal to me. Installation is not super simple but isn't really bad either. There are 3 different sizes of bolts and I had to fish one through the frame (on each side) but they give you the fish wire and it wasn't tough.

Installed easy and fast look good on my Ram 1500 Classic

We put these on our new 2020 Ram. Very pleased with the quality, ease of installing( once we found a heated garage) and the look

Love the way these look on my truck. Easy to install because I took it to a professional, only cost $100 and it was well worth it!

Beautiful running boards, easy to install, but was missing 3 washers, 3 locking washers, and 1 nut.Is that minor.... sort of...??? yes, did I still have to go to the hardware store?? Indeed i did!!! They look great now...step it up people!!Wasting an hour or so of my time....... quality control would be nice guys!! I love the product.......sigh....be happy your product is decent.

Looks great on the truck, took 20 minutes to install. Love it