Diamond Machining Technology (DMT) WM8EF DuoSharp Double-Sided Diamond Sharpening Stone Bench, Fine/Extra Fine, 8 Inch

I like a sharp knife but I am far from an an expert in tool sharpening. I had a couple of fairly expensive knives that I could no longer sharpen with the stones, steel rods, and ceramic sticks that I had traditionally used. I decided to invest in a diamond stone. This DMT bench stone works great and the fine/course combo has been good to restore my dull knives or tone those that were in better shape. I liked it so much that I also bought a small pocket model and and a rod by the same company for serrated blades. I am using it in the available plastic base and I think that is the way to go. I have sharpened every knife we own, my axes, all my tree and shrub trimming equipment, and I used the diamond bench stone to flatten my old sharpening stones that were grooved from use. I am glad that I bought a larger size for all the things I have sharpened. It is easy to clean with soap and water. A solid tool investment.

I used to use ceramics to sharpen things like chisels and planes, but these diamond stones are really great. A little water is all that is needed, and after a few passes over the various "grits", I've got some seriously sharp cutting edges.The only con is that the price is a bit high, but given the results, quality of the bench stone, and ease of use, I'd buy this product again if I had to. But since these have made it to my list of tools that never get loaned out, I'll hopefully never need to repurchase them!

Have you ever spent a half hour trying to sharpen a knife with a hard blade steel like s30v only to take off barely any material? If so, you know it can be a real pain in the a**. Metallurgists have been doing some crazy stuff with powdered metal alloys in the last 10 years since I started sharpening my own knives. While the old sharpening tech still works, it is painfully slow for these new super hard steels. Something more aggressive is needed. DMT plates provide extremely fast and precise removal of material. Since they are so expensive I was worried about quality because of some reviews, but mine look great. There is a slight break in, but not too long. I was able to reprofile the edge of my benchmade 535 (s30v) in about 10-15 minutes using the extra coarse side. I did not find it to be too coarse like some reviews, and the plates are very flat. I think some reviewers mistake the extremely aggressive removal rate for a more coarse grit. I examined it under magnification and the diamonds appear to be consistently sized and about 220 mesh as DMT says. It is extremely fast even with s30v, to the point that every stroke counts. Instead of mindlessly giving it a few passes and then looking, I found myself concentrating on specific areas of the blade and looking at it after every pass. It allows you to cut so much with each stroke that it is almost like a power tool. DMT says that the extra coarse is a “safe alternative to powered grinding”. This is absolutely true with the added benefit of much less likelihood of heating the blade. It would be very easy to destroy knives as well with this system if it is misused, but that is true with any powerful and useful tool.

A great beginning to the sharpening process. The coarse edge will quickly reprofile and edge angle to your liking, or repair nicks in the blade. You'll want the extra coarse if it's really bad though. The fine will start getting you towards a razer edge, though you could use it there if you didn't want or need much sharper. You can move on to either the extra and extra extra fine diamond stones or some ceramic stones for finishing up and getting a razer edge.Remember to not use a lot of pressure with these. If you press too hard, you an actually remove some of the diamonds. They are held in place by a metallic layer and you can break that away if you press too hard. A light touch is all that's needed.

The small box or the package container shows "Made in USA". On the inside of the package it shows "Made in China". One of the little plastic "Fine/Extra Fine" indicators is missing and the remaining one is in the package, however it is detached so I'm not sure which side is which. Purchase with caution.

Like the others have said, this is simply amazing. Even hardened steel blades grind down like butter on this unit.I have found that virtually ALL knives that you buy (with the notable exception of Moras) have the edge angles too steep, so you need to remove quite a bit of material from the blade before you can get to the honing stage. For this reason, the DMT Extra Coarse/Coarse stone is a necessity. (I bought the Fine/Extra Fine first and loved it, but soon realized that I needed the Coarse/Extra Coarse to start, otherwise I would be spending hours with the Fine.)For this reason, if you are serious, just buy the Extra Coarse/Coarse at the same time as you buy the Fine/Extra Fine, along with the little plastic stand, and welcome to the world of serious sharpening!The shipping was prompt. A great transaction.

I hate that DMT charges more than twice what I think this Duosharp is worth but, alas, I bought it anyway because ... well, DMT and I both know that no other company (or product) can fill this niche as effectively.Yes ... I reluctantly recommend this product and I WOULD purchase it again, knowing what I know about this product ... and it's performance ... and it's endurance.Very pricey ... pretty heavy ... The only product that does what it does and does it this well.Deduct one star for the high price. Please make it lighter weight and less expensive. Thanks.This goes in my expedition pack. The weight and size are totally justified.Grumble-grumble.

I had my reservations because I normally use a solid sharpening plate but its become my favourite coarse stone by far. Works smooth, takes a lot of material off and quik while prepping the blade for the higher grit stones. Good stuff!