MICTUNING 32 inches Universal Straight and Curved LED Light Bar Cover

Surprisingly this fit extremely well over our dual row 52" lightbar for the Jeep. It doesn't do much for the sound, in fact it may make it a little louder when traveling down the road. Went on extremely easily and was a fairly straight forward install. Has lasted so far for the past several months on the light bar without any fading or tears. The logo isn't obnoxious or anything, though I would have rather it just been either a stitched symbol or not there at all. Currently in use in the south and has resisted our heat and sun, which is fairly impressive and is still a nice deep black.

It does exactly what I want it to do. Silence the whistle of the light bar on my jeep. It looks good, fits good, and it makes the whistle seem like it’s not there. Such a big difference. It’s soft inside so it doesn’t scratch and then sports jacket material on the outside. If anything changes I’ll update this review.

I purchased this light bar cover to go over a 50" bar. It is a little difficult to get on and doesn't fit perfectly but it does the job for the cost of the item. It is made fairly good.

Its nice but you need to put it in the sun on a warm day to let it expand like a new softop before you put it on. Also ends have to be modified depending how your light bar is mounted. But it eliminated the whistling from the light bar. Pretty good quality inexpensive easy to clean make sure you measure light bar and get one for your size there is NO wiggle room it fits tight as it should. Doesnt blow off at highway speeds! Most states require by law to cover your light bar. Some states the fines are heavy. Cheap insurance!

I’ve had no major issues with this cover. I’ve only had it fully on once (in order to get my vehicle through inspection) and it did what I needed it to do well enough. I will point out a couple of things to keep in mind, though: First, this thing is an absolute bear to put on. As I was on my own, I ended up having to take my roof off and stand on the front seats. This made it easier, but it was still difficult. Just the nature of the design. The Velcro holding it on is SUPER strong – once you get it installed, it isn’t going to blow off, which is a good thing. Getting it off was a little difficult, but it’s not like you’re putting it on and taking it off every day. I’m not in love with how it fits on either end of the light bar – the brackets get in the way a little. Not enough to effect performance, but enough that it wasn’t a “clean” look once installed. This was not a problem for me since I only needed it on for a couple of hours, but it’s something to consider if you plan to use it the majority of the time. Another non-issue for me that you may want to consider is that the description indicated it would help with wind noise. For me, it didn’t at all. Light bars are noisy, and the cover didn’t change anything. That all being said, it seems to be of high quality and it did exactly what I needed it to do, so full marks from me.

Wasn't too impressed as some of the other reviews. My 52" light bar is right above my windshield with 1/4 inch clearance to the roof. This cover literally took me 45 minutes to install and I had to have the logo facing down because I couldn't twist it once the velcro was secured. My only other option is to remove the light, put on the cover and reinstall the light which seems like a pain. I don't care about the noise because my truck is loud anyways. I'd rather have say 6 velcro straps that loop under and around the unit to fasten. Then I can install it fast and correctly. That's how my old one was.

My hope was to eliminated the whistling (at almost all speeds) and the hum at higher speeds on my 52" lightbar. The extra protection is a bonus. This product did it. I still have a slight hum at highway speeds but it's not near as loud as before and the whistling is gone completely. If I need the light it will only take a minute to take off the cover and good to go. I wouldn't say it's a universal fit as it is a really close call on my lightbar. The length was ok but had to cut a seam at each end to get it into my mounts and the circumference is tight for my lightbar. That being said, I have enough velcro overlap to close the cover and it solves the problems for me. I didn't rate the durability... We'll see how it holds up.

These are my second set of covers. The first set was bought about 10 years ago. They were faded and ripped by now so time for new ones. I have double narrow 50” by about 1.5” wide light bars back to back and these work good to cover each one separately with room to spare in each bag. The Velcro is solid and doesnt come off while driving. And definitely stops the wind whistling.

Ripped from the seams after first use trying to open it. Have contacted the seller and will provide update. Perhaps just got a bad batch that slipped through quality control. Update: seller refused to return the product or offer exchange as it was outside the 15 day policy despite the poor quality. I am not satisfied with both the product and the customer service.

Bought this for reversing off road and have fitted it to a roof rail on a Range Rover Sport. This is a great product very well built, extremely sturdy, and very easy to fit. It has cooling fins running longitudinally which when fitted for normal forward lighting are probably great but do cause serious problems when fitted as a reverse light. Vibration sets up at 30 mph which by the time you get to 70 mph is a bit like a police siren inside the car. I found that a small variation in the airflow solve the problem. To this end I made a deflector plate to clip over the front facing fins this solves the problem. Not sure why need the fins as it doesn’t seem to get very warm, but I’ve only used it for 20 minutes. I purchased the recommended wiring loom for this which not only makes installation very easy but has the addition of a remote control fob. This means I can connect to a rear electrical socket but control the light from both inside and outside the car. The remote gives the addition of two stages of flashing light, Which can be very useful both on and off road. If you want a high-quality well built lamp then you can’t go wrong choosing this product.

Encaja perfectamente,en mi caso en una barra led curva de 42”,la e probado lloviendo bastante y no se moja nada el foco,se agradece mucho llevarla,ya que quita bastante el ruido molesto del aire,lleva un velcro bastante ancho y no se despega con facilidad.

very tight fit, bit difficult to fit & remove by yourself on a tall vehicle, but completely stops any wind noise and looks smart.

Bought for a 42" curved, I love it, fits like a glove and keeps my light bar looking like new