LET'S RESIN 1/2 Gallon Epoxy Resin,Crystal Clear Resin Epoxy Kit for Crafts

I'm still fairly new at using epoxy resin, but the minute I start using this resin I knew it was better quality. Easy to mix, easy to remove bubbles, clearer that others I've tried, I'll continue to buy Let's Resin. I also like their molds as well, top quality. Also, the resin dries quicker without annoying failures like wet spots.

I LOVE this resin, as long as I warm the bottles in a very warm water bath before measuring the amount I'm using I've found that it is practically bubble free. The resin cures quite reasonably and very quickly inside my resiners curing machine. It's beautifully clear and has nice shine. It's fairly durable and again dries nicely. My only problem so far is that I haven't had any luck with getting the consistency to my satisfaction my glitter and other add ins seem to sink to the bottom no matter what I've done even with waiting awhile for it to thicken. But I'm sure that will be solved as I continue to work with this resin. I love thar it doesn't have a strong odor. I'm definitely pleased with this resin

This epoxy is pretty good I’m a novice at this stuff but it hardens and sticks to wood at least very well I’ve done a couple small pours and it works great no air bubbles and the clarity is great. I love the price compared to a lot of other brands, especially to practice with.

Crystal clear resin, great outcome. I love when their on sale too!

Awesome epoxy!!! First time user, they made it so simple! I mixed the full two bottles together for 3 mins, let sit for 5 before pouring and let the epoxy cure in my warm bathroom. Almost no bubbles at all! Very easy to do and simple! Cured so clear and quick!

I’ve purchased multiple molds from Let’s Resin before but haven’t tried their actual resin until now. I’ve been using resin for about five years so I consider myself a relatively seasoned resin-er. I also sell my resin products so it’s very important and crucial to me that these projects come out as flawless as possible. So when I tried this resin out, I was pretty surprised that it had relatively low bubbles compared to other brands I’ve tried and very clear. Both of those things impressed me. It’s a little bit thinner than what I’m used to working with but it suspends glitter pretty well and I did not have an issue with it sinking and separating like I was anticipating. It does have a stronger smell but it’s not bad. (Always use ppe!) Onto the downsides… you will need a warmer room for it to cure than with other brands. I typically work in a 72-75 degree space and keep the humidity low. I’m used to doing a pour around 7/8pm and then being able to demold about 12 hours later when I wake up for the day and the project is set. I could NOT do this with this resin. This resin was still floppy and bendy after waking up and it was impressionable. I left it in the mold and applied it to a heat mat for about six more hours. Then I could demold and left it on the heat mat for another couple of hours. I did multiple projects just to check to see if that was the norm and it was. My first project was poured at 8pm and felt solid around 5pm the next day, almost 24 hours later. The next project was also poured at 8pm but was not cured and unbendable until about 8pm the following day. The third try was the same. I was very worried that these projects would not set fully. But, now I know it just takes a bit longer and needs a warmer environment. Overall, I WILL be using this brand again. Even though the cure time is longer, the price is lower than other brands I’ve seen and my projects have come out more clear with less bubbles than most of my other projects. I don’t need to go in and try to pop air bubbles anymore. It’s almost “set it and forget it” quality. I’m unsure about yellowing at this point or scratch resistance but I’ll update when I do know.

I have used other brands, Stone Coat for instance. The Let's Resin products are the best. Easy to use, low bubbles, beautiful finish. This is my favorite resin.

Nice quality, clear & easy to work with (as long as you’re wearing gloves)

Original.

Das Epoxidharz lässt sich m. E. super verarbeiten. Ich bin Anfängerin, probiere mich noch aus (wie man an den Blasen in einigen meiner fertigen Ergebnisse sehen kann). Ich werde dieses Harz jetzt ein 3. mal bestellen...1,5 Gallonen für knapp 100 € sind im Vergleich zu einigen anderen Angeboten zwar überdurchschnittlich teuer, aber ich traue mich nicht: es gibt viele Rezensionen mit unendlich vielen Erfahrungsberichten (mit Bildern und Begründungen), die mich verunsichern. Mit diesem Produkt komme ich gut zurecht. Der Versand ist auch topp: super-schnell, das Harz kommt gut verpackt und ohne Beschädigungen an (scheint längst nicht bei allen Herstellern selbstverständlich zu sein).

One of my fav resin...thanks for the fast delivery ♥️

2nd purchase for this resin, very little bubbles. Really easy to mix with pigment powders or paste.

Excellent resin I am unable to buy direct from your UK or USA sites as not in either of those countries. I wish you would list more on Amazon as its the only place I can buy from.