Lufi XF Revolution Automotive Multi-Data Digital Display Gauge [Speed, Voltage, RPM, Water & Oil Temperature, Fuel Consumption and More] Compatible with OBD2 Enabled Vehicles

Bought this cuz i prefer a digital read out over analog. My old car doesn't have any temp guage for water or oil temps or even a battery voltage indicator. This was quick to set up(just plug it into the obd2 port and stick it to the dash.) It's pretty customizable as well if you need more info displayed.

جوده عاليه ودقيق والعديد من الخيارات الجميله من قراءات العدادات

Incorrect readings and unreliable information; it should read data directly from the OBD, but shows different readings. Only a few readings are correct. Even the gearbox position is not displayed. The only positive aspect of this device is its appearance.

I’ll update this as I go along, and try this in several vehicles. Tried this initially in a 2010 Mini Cooper non-turbo model. I’m impressed with the quality of the display, the fluid refresh rate of the data (some monitors can be painfully slow and clunky), and how customizable the display is. As a mechanic, I wanted something so I can readily see coolant temp, voltage, and other data readily, as most instrument clusters nowadays are so dumbed down, you can’t see any of this. I wanted something more modern than a scangauge (nice product, but terrible and outdated display). This fits the bill. If you plug this in, and it does not shut off automatically, there is a wire coming off the included OBD connector that can be wired to a “hot with key on” wire. Overall, very happy. Will update as I go along. Update: can confirm does not work with a 2000 buick Lesabre, which makes sense, due to older obd2 protocol. Will try in a 2004 Mini Cooper soon.

Really impressed and blown away with this gauge. I had gauges in my tuner cars in the early 2000s, non-digital ones. A LOT has changed since then! The install was so easy. Found my OBD-II sensor (located right under my steering wheel) and simply plugged this unit into it. I tucked the wires under the dash and ran the main cable up the side panel (easy snap off side panel in my Toyota hatchback). Used the 2-sided tape provided (it is good quality tape, I have no doubt it’ll hold…and if it doesn’t, I just use some 3M) and that was that! The screen gives you so many options for your display. I picked: Water Temp, Battery Voltage, Average MPG, and Oil Temp (my dash cluster doesn’t give me these readings detailed so that’s why I wanted a gauge, to give me real-time readings. I also liked that I could swap out LED colors of pretty much everything on this unit. I was able to match my interior dash colors and accent my under dash LEDs as a secondary color. Really impressed with this unit. If you are hesitant, don’t be. This was a great addition to my car upgrades!