Russell Hobbs RHSCH901B 90cm Wide 5 Function LED Light Cooker Hood Black Stainless Steel

This was a replacement hood. The original vent outlet was smaller than new hood ducting. Bought new 100mm ducting and a reducer for about £5 from a local supplier. Fixed with duct tape that came with the hood to join the two ducts. Removed a row of tiles as the hood was deeper than my old one. Put a new vent flap on the outside as well to stop the wind blowing through as it had been doing for ten years. The plug was sealed so I cut this off, reduced the cable length and hard wired it back in. Added a new glass splashback beforehand to get the correct measurement for the hood bracket. The hood's front bright LED lighting is fantastic, as this is where you need the light when using the hob. The venting is powerful. I am very pleased with this purchase. Worked carried out by 1 person.

Quick delivery via Prime and well packaged.I was replacing an existing extractor so my position on the wall was determined already by the cooker backsplash. I taped the bracket onto the hood and offered it up to the backsplash resting it in position on top of it marking the holes needed. I figured that dead reckoning would have been inaccurate. Of course, if you have freedom of vertical position then you can just attach the wall bracket and away you go.I would recommend screwing the chimney fixture screws into the bracket before putting the bracket on the wall as they are self-tappers.The extractor comes with a moulded plug so fit a socket in the chimney area if you haven't got one.The extractor is 150mm in diameter and my existing one was 100mm so I needed a spigot adaptorhttps://www.amazon.co.uk/dp/B00H510IH2?psc=1&ref=ppx_yo2ov_dt_b_product_details

The media could not be loaded. Not too flimsy, as many "cheaper" hoods often are. Lights at the front give good coverage. Fan is a little on the noisy side, but at least it still sounds like a fan and not some rickety rattling engine. Mounting bracket makes fitting straightforward, especially since it's a larger unit. Just follow the fitting instructions provided and check your levels and measurements before drilling, and you can't go wrong. Power cable has a 3 pin moulded plug, so you'll need a socket to plug it in to. Overall, can't really complain at the price point.

this is a well constructed hood 3 nice mesh fighters that are easy to remove and clean quite powerful ensure it is well secured, so as to avoid vibration noise , ive ordered a spare light just in case as its a complete fitting .

Great piece of kit

Nice cooker hood. Looks smart and works well, but buy genuine charcoal filters as the ones suggested in the listing do not fit!

Best cooker hood I've fitted to date and I fit lots of kitchens. I like the mounting bracket it makes fitting easy. Hood supplied with two led lamps and the motor has three speeds which has average noise levels typical of cooker hoods at full speed. Though supplied with a plastic extraction duct it's 150mm diameter which I find far too large so you will need to purchase a reducer if you want to duct externally. I use flexible 100mm duct cored to a vent that isn't enormous. All the extra bits for extraction are available from Screwfix for under a tenner and as the motor is powerful it works great. If you want to recirculate rather than extract be sure to order disposable carbon filters (not included) that screw onto the motor housing or you will get unsightly staining from the chimney over time. A note to consider is that this kit does not supply you with a duct section that diverts recirculated air out of the vents at the top of the chimney so you will end up with a dusty ceiling over a period of time. This review is posted a month after fitting so cannot comment on durability.

The cooker hood is exactly as described, which was perfect for me as I wanted a like-for-like replacement for the cooker hood in our kitchen that had failed (a different brand but essentially the same hood). This hood is however a little noisier than the item it replaced although it does work well. I had cause to contact the seller as the first deliver was the wrong unit. They were very friendly, helpful and did exactly what the promised to do when they said they would. One slight issue I have with the unit potentially though is the lighting; it's very good, but if it fails you cannot simply change a lamp but rather you have to replace the whole module according to the user manual - let's hope the lamps have a long life