Specification: Orientation:Right for Right Handed Players Scale Length: 25.5 inch / 648 mm Number of Frets: 22 Width at Nut : 1.65 inch / 42 mm Width at 12th Fret: 2.07 inch / 52.5 mm Width at Heel :2.22 inch / 56.50 mm (0.5 mm Deviation) Depth at 1st Fret: 0.83 inch / 21mm Depth at 12th Fret: 0.91 inch / 23 mm Depth at Heel : 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(0.5mm Deviation)) Tuner Hole Size: 0.39 inch / 10 mm Truss Rod Type: Double Style ,for 4 mm Allen Wrench Radius: 16 inch /406 mm Wood: Maple Origin from Canada Fingerboard: Maple Back Profile: Rosewood Finish: Vintage Tint Gloss Fret Wire: Cupronickel Fret Wire Type : 2.4 mm Medium Jumbo Dot: Black Abalone Dot Size: 0.24 inch / 6 mm Side Dot: 2mm Black Dot Features: Made of Maple Wood Origin From Canada Which is More Sturdy and Resonance and Sustain Well Smooth Fingerboard Edge, No Hand Scratched Installed with Double Style Truss Rod for 4 mm Allen Wrench,So You Can Adjust to Loose or Tighten. High Quality Maple Fingerboard with 22 Cupronickel Fret Wire and Black Abalone Mark Dot Inlay Package Include: 1 x Guitar Neck Note: guitar neck is hand craft and there are tiny size error , if you need some other size of heel width or heel depth ,please email us.
R**.
fantastic quality neck
fantastic quality neck. The vintage gloss finish is lovely and smooth, nice rich honey colour. Tuner holes are sized for modern tuners but you can get reducer bushings if you want to use vintage type tuners instead. The frets were really well prepared and needed very little work at all.
F**D
Looks great and plays nicely
Fun replacement neck for a cheap TC-style guitar. Fitted beautifully into the neck pocket, no adjustments needed at all. Looks great and plays nicely. Took a couple of hours to swap the machine heads, drill holes and attach the new neck.
B**I
Ideal for cheap home build
Ridiculously good value. Very acceptable finish and for the money.... well simply a steal. Minor fret work only required
A**R
Good value, be prepared to fettle a bit.
Arrived quickly, overall finish very good for the price. Headstock shape miles off the original Tele. No idea why they would do this. Heel is a little too wide. Truss rod works both ways, slight twist in this neck. Hope I can true it up with the frets. Great project neck. Needs some work.
L**S
looks good feels good
Put this on my old telecaster.looks good feels good.had to do some minor fret work but,for price I paid I was expecting to do that.very good product was surprised at quality.
S**M
Buy it now
Great neck, specially for the price the finish is nice and smooth the end of the neck is a bit thick (where the bolts are) but I just raised the bridge and works nicely done a few gigs with it and got alot of comments about it
J**.
Nice and straight
Just what I needed...lovely piece of kit for the money. Nice and straight, well made. Quick ship, I'm happy :-)
A**Y
Completely unacceptable
Light yellow Maple Guitar Neck For Fender TL Replacement Rosewood Inlay BackFirstly, the neck arrived much faster than expected.Even though the box was quite battered the neck was unharmed by it’s time with the postal services - the same cannot be said for the manufacturer.Several small dents here and there (which it had) I can live with for the price. The colour too is pretty dark - almost orange!Also, do not assume that because it has a (dodgy) skunk stipe, that the neck is a single piece of maple, - it isn’t - there is a glued on maple fingerboard. (You can’t see this in the Kmise photos on Amazon)Hole sizes in the headstock are about 10mm.Fret edges were sharp and would have defiantly needed dressing.To my eye my neck had a twist warp - not goodThe worst fault was the shape of the heel - it was NOT SYMMETRICAL - this alone is reason to not use it but combined with a twist warp is completely unacceptable.Kmise were very helpful. It was returned and I obtained a prompt refund on the neck and also on the postage.
Trustpilot
1 day ago
1 month ago
