Ecotex® Tex-Red HV Pre-Sensitized Screen Printing Emulsion, High Viscosity

Great stuff. Coats well and has a great thickness, which stretches the jug longer. This is my favorite emulsion. I use a UV bulb exposure unit and expose this emulsion at 8 minutes.

Great product! Good value. *CURING WITH THE SUN* I ran two test 1:45 2:05 They both cured well the 2:05 had more solid lines I would suggest 1:50 - 2:10 burn time. ** used a pressure washer to wash out **

Great product, I needed it immediately or I would have waited for my usual delivery but that takes a week to get, I got this the next day.

This was my first time using high viscosity emulsion. It was a bit irritating at first because I didn't realize just how quickly it starts to dry out. However, once I got used to it, no issues at all. So far, the exposure time with my 50W(350W equivalent) LED seems to be between 25-30 minutes with the bulb 12-14 inches from the screen. The one real complaint I have is that the instructions on the container say to pry the lid off with a coin. I quickly discovered this to be quite difficult and frustrating. Use a flathead screwdriver instead ;)

I was having trouble shooting screens with other emulsions until I found Ecotex's TEX-RED-HV. I apply a coat to the print side and a coat to the squeegee side and have the screens dry for about 7-8 hours. I use a 500W halogen light about 15 inches from the screen and it takes no longer than 3 min to burn a perfect stencil. Using my shower head this emulsion washes out in no time without much pressure. Since switching over to this emulsion I can now feel confident with my home set-up. So glad to have found my go-to emulsion.

Works perfect! I find this alot easier to use than the two part emulsion. I will definitely purchase again!

Extremely disappointing in this emulsion. Don’t waste your money on it

good product