X-Sense Wi-Fi Listener for Smoke & Carbon Monoxide Detectors, Free Real-Time Alerts, Works with SBS50 Base Station (Included), Not for Smoke or CO Monitoring, Model SAL11

Used with two different smoke alarms and the unit works great. I had trouble with our First Alert SCO500 alarms during the test sequence. The alarm test sequence adds voice "Testing, Testing" at the start of the test. This confused the listener and it did not trigger. However when I actually set off the alarm with smoke detector test spray, the listener properly activated every time. X-Sense customer service was excellent when I contacted them via email.

Allowed for easy expansion of hardwired systrem to add additional sensors to my home and allow me to get alerts to phone which is a huge plus.

X-Sense hit a home run with this setup. Gives me a real-time alert on my phone if my smoke detectors, water sensor, or temperature sensors are triggered, even if I am not at home!Base station connected easily with my Wi-Fi and the listener/sensor connected easily to the base station. Listener is mounted on 2nd floor next to smoke detector and maintained excellent signal strength with the base station located on the 1st floor. I tested the listener with an actual beep test of the smoke detector and it worked flawlessly forwarding a push notification through the app to my phone alerting me immediately with an alert tone and message.I also purchased an X-Sense water sensor that works with this base station for use next to my sump pump that also connected easily to the base station, and has excellent signal strength from down in the basement. This sensor also tested flawlessly from its location in the basement.This system worked so well that I decided to purchase the temperature/humidity sensors that also work with this base station that I will use in my home, garage, and 2 freezers located in my garage. Real piece of mind to have immediate notification of triggered detectors even when you are not home.

This works well but only for a single smoke detector. I have three smoke detectors within a few feet of each other at the end of our hallway, and this will only pick up on the detector a few inches away. If your hard-wired smoke detectors are not interconnected, this means you would need one listener per smoke detector.

We had a family house burn down close to me where they lost everything. The report was they did not have smoke detectors in their home. I read the fire code and fitted my home to exceed the smoke detector requirements. The house that burned down, fire started in the attic. I have detectors in every room of my home including the attic and garage. Figured small price to pay for my family's protection.

The set came with 3 listeners, and one out of the 3 will not complete setup because it will not pass the test. Since I’ve set everything up, I do not want to have to return the whole set. No way to contact seller here. Reaching out to X-Sense doesn’t go anywhere, as they will direct you to Amazon. I would avoid purchasing on Amazon.

I like this for the peice of mind I get.I'm not really sure why it needs to be 2 separate devices? A base station and the listener. The base station plugs in to house power and connects to wifi. The listener is set up near a smoke detector and is battery powered. The listener communicates with the base station when an alarm is heard. The base station sends an alert to my phone through the xsense app.Just the fact that I will know if my smoke detector is going off when I'm not home is a big thing for me. Hopefully I would be able to call fire department quicker than a neighbor when I'm not home. I feel like this is a must for my dogs that are home when I'm working.

I have a battery powered heat detector in the garage in case something happens with a vehicle. However, this is not interconnected with the rest of the house, so I wanted to find a way for a device to alert my phone should the alarm go off.I had used Alexa's Guard for this purpose, but it was an imperfect solution as it was across the garage and its detection of test alarms was spotty at best. The last straw was the recent email that the Guard's alarm listener function was going to a subscription model.I researched other options and the only other one I could find was a Ring listener which required a base and a subscription. Luckily I found this item.This is a very elegant solution as it's a one-time reasonable expense and works great. The phone app is downloaded and pairing them with the devices is extremely easy as they interconnect over the 2.4 Ghz Wifi network. The listener is installed within 6 inches of the alarm and detects it easily.Really happy with this solution which is no longer spotty nor does it require a subscription.