BRESSER Wall Clock, Stainless-Steel, Green, 25 x 4.6 x 25 cm

Lovely clock slightly on the smaller side but does what it says on the tin

Instructions state 7 = M.SET button, 8 = RESET and 9 = REC button. However on the clock back, M.SET is in the 9 position and REC is in the 7 position, 8 is correct. However pressed the correct buttons, Minute hand went through one cycle and all stopped at 1200, the hour hand started to move very slowly. I left it for an hour or so and it was telling nearly the correct time, in accordance with my 6 other radio controlled clocks. I say nearly as it indicated 1 minute in advance to the others, I think that is how the minute hand was attached but I can live with this. my main criticism is that there are no minute/second indicator dots around the circumference of the clock, only 1 - 12. Except for these 2 comments, it would have got 5 stars.

Accurate time piece providing temperature and humidity too . Clear display . Excellent value for money .

Sometimes it take sooo long to set itself

The media could not be loaded.  ___________Purchased this as a replacement for our kitchen clock. Received as described with correct and accurate measurements.The Good:-------------------• Good quality clock and nice construction - it's lightweight but certainly doesn't feel like a cheap product.• Being a radio time (MSF) signal clock, it will constantly self correct itself. No more worrying or having that uncertainty if the clock is slow or fast!• Once the battery is in place, the hands will start moving automatically in fast forward mode. Don't worry if they go past the actual time, as this happened with our clock. It starts off at 12 o'clock (out of the box) and it went right around to 12 o'clock again. However, after a few minutes it starts moving again - this time stopping at the correct time.• The Second hand not only sweeps in a nice smooth motion, but the entire clock is silent of any ticking!• Temperature & Humidity dials.• 5 Year Manufacturer GuaranteeThe Not-So-Good:-------------------• Before inserting the single AA battery (which isn't included) you need to remove the transport locking pin located above the battery compartment. The pin is actually beneath the sticker that is stuck on the back panel. Remove the sticker and you'll see a tiny pin head (which is what needs to be removed). I mention this only because it's mentioned in the instructions but NOT illustrated, and could cause operational problems if you're just going by the illustrations and ignore it.• We purchased the green clock. However, in hindsight, we would have chosen the white face colour (or any other colour - except the green). The reason for this is because, in person (and especially if there's a bit of reflection in the glass or you are at a slight angle), the contrasting colours of the green face with the position of the white hands isn't very prominent (The second hand is greyish in colour and practically turns itself invisible)!I don't know if it's because the hands are not 'bright white' enough, but at a distance, they don't stand out as clearly as you would expect against the green background. Compared to our old white face/black hands clock, this difference is really noticeable.British Summertime:-------------------If you already own this clock, you may be surprised to discover that it does not automatically adjust itself for BST. Which makes for a puzzling thought - if this clock periodically updates itself via MSF signal to display the correct time - why does it not do so for BST??Anyway,....To adjust the (+/- hour) time for BST, you need to initiate a manual MSF signal.Simply press the small REC button (on the back) for 3-5 seconds. The clock hands will soon move to the 12 o'clock position where they will remain for upto 5 minutes and then will automatically move by themselves to the correct time. Simple - Job done!However....If pressing the REC button for 3-5 seconds does not instigate the hands moving to the 12 position, then (as we discovered), it may be that your battery is too weak! Change it for a new battery.Ironically, when you put in a new battery, the clock will think it's setting the time for the 1st time anyway and go through the process as if it's new (as above).... which makes taking the battery out and back in again probably a simpler solution to adjusting the time for BST.

Looks good in my teenagers room and I'm happy I don't have to fix time for daylight saving.

We previously purchased this brand and design of clock, then our old kitchen clock (don't know brand) went wrong so purchased another of this great design. A great metallic blue dial, with the same auto correcting time. A great clear and stylist clock

Great looking clock. It sets the time automatically a few minutes after putting the battery (not supplied) in. It's a bit freaky watching the hands wind forward to the correct time by themselves.It's a good looking clock and looks nice on my kitchen wall. Since it sets itself by radio signal, it should be very accurate. Typically clicks like this adjust themselves every 24 hours.