FrSky Archer Plus SR10+ Receiver 3-Axis Gyro & Accelerometer 10 Configurable Channels Access & ACCST D16 Compatible Anti-RF Interference FBUS & S.Port Telemetry Black Box Data Logging

Description

Product Description ARCHER PLUS SR10+ Receiver The Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. Technical specifications How to switch the S.Port/F.Port/FBUS Enter into the [Set] of receiver. Click the Telem.Port, and select S.Port/F.Port/FBUS. How to switch SBUS channel mode Enter into RX Settings. Click [SBUS], then select SBUS-16 mode or SBUS-24 mode. Black box function Black box records flight data, e.g, RX Reset Case, RSSI, VFR and so on. For TANDEM X20 as an example, to get flight data, please go to RF System-[Set]-[Flight Data Record]. Two independent stabilizing functions Option 1 under 'Stable System1' in the Stabilizing allows turning on or off the first group of stabilization channels (CH1-6), while Option 2 allows turning on or off the second group of stabilization channels (CH7-11). Distance detection1 A pre-flight range check should be done before every flight, in case the signal loss is caused by the reflection of the signal by the nearby metal fence or concrete, and the shading of the signal by buildings or trees during the actual flight. Distance detection2 1. Place the model at least 60 cm (2 feet) above the non-metal contaminated ground (such as on a wooden bench). The receiving antenna should be in a vertical position. 2. Ener the ETHOS system, move to the "RF System", scroll the Encoder to select "RANGE" mode and press Encoder. In range check mode, the effective distance will be decreased to 1/30. Overview ● Enhanced Anti RF-Interference capability with more solid RF performance ● Smart-matched ACCESS & ACCST D16 modes ● Supports basic Black-Box function ● Built-in 3-axis gyroscope and 3-axis accelerometer sensor ● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) ● 10 configurable channel ports* (PWM, SBUS, FBUS, or S.Port) (Note: In ACCST mode, SBUS Out is assigned on Pin9 & S.Port is on Pin10.) ● SBUS Out port (Supports 16CH / 24CH mode) ● SBUS In port (Supports Signal Redundancy) ● Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in the spark-ignition process ● Over-The-Air (OTA) FW update* ● External battery/device voltage detection LED State Review: Auch für die Tandem xe geeignet - Sehr gutes Preis Leistungsverhältnis Review: Nice size - Works as it should 😊