bbfly-OPCOM V1.70 mit PIC18F458 obd2 opel scanner Micro chip diagnose v201 Op-com / Op Com

Description

OPCOM V1.70 Firmware Software Function: 1. It covers almost all Opel cars, even new cars based on CAN-BUS diagnostic, such as Vectra-C, Astra-H, Zafira-B. 2. The program lets you read aloud and clear error codes, shows them phase data, they can perform copy checking. 3. The program supports many control units, such as engine, automatic transmission, ABS, airbag, module, instrument cluster, electronic air conditioning, body control unit, just a few examples. 4. Since for Opel many pin in the obd connection, the diagnosis interface as multiple coupler, and chooses the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = serial link (ISO9141, KW81, KW82, KWP2000) 5. error codes are displayed with all information. Full error code text description: 1) full status information (presence, not present, intermittent) 2) print out Can save, or copy the error codes to other application. From the error codes windows, they can go directly to the measuring blocks of windows. 3) The program displays them mess block information on many control module, they can choose something from the list on their own. 4) The program is in the position shows 8 measurement block parameters simultaneously. The sample rate depends mainly on the communication protocol. For example, older system, such as Omega-B X 25 DT engine (ISO-9141-2) can be very slow in communication, while newer Multec, or for Bosch units faster (using KWP-2000), and the latest CAN Based control units are very fast!