Dual-Lens Articulating Borescope for Automotive Mechanic Inspection

Cool toy and works fantastic! Great clear color image. I dropped a tiny guide sleeve while servicing my Yamaha outboard's fuel injectors - couldn't find it on the floor after lots of searching. So, a tiny chance of ruining a $15000 outboard or buy this thing for $135 (it's actually cheaper as of this writing) and make sure it didn't fall into a cylinder? To me, a no brainer. The guide sleeve wasn't in there - but I put together my outboard and ran it without worry. And that's a good deal!

I purchased this 5ft model some about six months ago. I used it a couple times and it was absolutely amazing, easy to use and performs excellent. The zoom works perfect and really shows the finest details. Look around corners or to the side or use the split screen for both. Anyway, great product at what I think is a very low price for what you get. But wait!! I had a small problem and I’m not sure what the cause was, and it was six months after I purchased. I read the enclosed booklet and it said to email support for any problems. I really didn’t expect anything back, but I was wrong. The next day I had an email from Layla at DXZtoz asking for more details of my problem. In 3-4 days my problem was rectified by Layla with my 100% satisfaction. Layla is a valuable asset to this company and has proven that real customer service is alive and well, something you generally don’t get from a lot of other manufacturers. My congratulations to DXZtoz, well done!! William N.

So far so good Good picture

Works good. The long cable makes it a little more difficult to twist and turn when your working close to something or in an engine cylinder. Picture quality is great. Easy to hit the picture/video button by accident, just need to be careful how you hold it. The instruction manual is pretty vague, but the tool is easy to figure out with some experimenting. Wish it needed less radius to turn back on it's self. Does turn back 180'+. End cap does not want to unscrew to install end attachments, so I didn't force it...will wait until I need to use one of them. Here is a selfie back up through the spark plug hole. Side camera is very handy in tight areas. Note: Sometimes the unit would not shut off, found a small hole beside the charge port. Pressed it with the end of a paper clip and the unit shut down. Obviously a reset button. Unit would then turn on and work normaly. Hoping that this doesn't turn out to be an issue!!!

Love this camera. Works great

I have used this device so far for a little amount of time, so I will say this, I am impressed with this bore scope screen image quality along with the brightness provided with the bore scope camera tip! It is truly impressive! What concerns me is the chargeable battery life and the replacement of the battery when the battery life ends. However, this will be in the future. I am still impressed with the quality of this bore scope!

Great scope in every way. I bought a 2003 Suzuki Grand Vitara in over all good shape to use as little 4x4 for dual sport use. It has very reasonable miles on it. I discovered it was going thru a quart of oil every 200 miles with almost zero leaks. I thought I had been really screwed but hoped it was valve seals. I wanted to check the cylinder walls for excessive wear and scoring before doing anything. I looked at a lot of these scopes and settled on this one for a number of reasons. I liked the side camera. I found that this unit is so good it is not needed. These all have internal batteries which die over a period of years. This unit can be run off a USB-C phone charger or an emergency battery for recharging a phone. That means that as long as the electronics work, it is good to go. It comes in a very professional carrying case and special hooks and stuff to attach to the end of the camera. Excellent light brightness. Excellent video quality. Focal length is from around 3/4 inch to 100 ft or more. Over all picture quality is bright and crisp with great resolution. I could count the factory cross hatch marks on the cylinder walls. Flex Tip. Just over 180 degrees. I was able to look back at the bottoms of the valves. The flex function works very smoothly. The info I gained was worth the money I spent. I could see that I have no burnt valves, piston tops looked good with a thin layer of carbon from the oil and the cylinder walls are in new condition. I decided to try some AT-205 to see if it would soften the valve seals before having them replaced. If that worked, I know the rings are likely good. It did nothing for the first 300 miles. Suddenly after letting it set for a few days, and then starting to use it again, the oil on the dip stick seems to have almost completely stopped dropping. I calculate I am now up to at least 400 miles per quart if not a lot more. There is no more smoke at cold start up or after idling for 5 minutes and taking off in a hurry.

I needed to peer inside the cylinders of my IO-470C (for a Bonanza) to check out the valves. I tried a few other borescopes and wasn't satisfied with them. When I saw the description and a review from someone else, I figured it was close to what I needed and cheap enough to not procrastinate. I was tempering my expectations. When I got it, it looks great and comes in a nicely padded carrying case. The key features I needed were the ability to point the camera back towards the hole it went through, a larger screen, a zoom capability, high resolution and clarity, and the ability to capture screenshots. I can wholeheartedly say this is the best borescope I have ever used. It met all of my requirements and has many features that are just better. It has good battery life, is easy to download pictures, easy to zoom in and take pictures. There were some concerns about it, though. When I received it, the steerability of the end camera seemed to be bound up, and I had to manually work the sheath to unglue it from the internal steering cables. I was worried that I was going to permanently damage the camera, but after I got it unstuck, it works fine. Another concern is how long will it last. It seems like the end effector is a weakness in the design and it is not easily replaceable. I will be careful with it and hope it lasts a long time. Overall, great product, which I am happy to recommend.

Great product

Work great. Very sharp pictures. I used it all the time in my small engine repair.

Purchased for husband to help with his work . Very satisfied with this product

This item works great.

great bargain and my techs love using this model after trying many others