Zinsser Bulls Eye SealCoat Universal Sanding Sealer | Bulls Eye SealCoat sanding sealer, Quart. Dewaxed-shellac universal wood sealer; fast-dry base coat compatible with all.

I recently purchased two matching antique bed frames made out of wood with a headboard and footboard each. They were quite dirty but otherwise in good shape. After cleaning them up, I wanted to restore the finish and add a layer of polyurethane for extra protection. After researching, I decided to start off with SealCoat since I did not know what the original stain or sealant was made of. I was so glad I found this product after searching "wood sealer" on Amazon, because you can't really find it in stores.This sealant goes on quite easily with a brush, and truly adheres to any surface, coating, or sealant. It also does a magical job of restoring a finish- my project was looking rough after a thorough clean with magic erasers, simple green, and a light sanding. After the first coat, any hazy spots, scratches, or weird water rings completely disappeared and it dried to a beautiful finish.I ended up doing two coats with a light sand (220 or finer) in-between coats. This SealCoat doesn't provide a super durable finish, so I opted to add two coats of water based polyurethane on top. The polyurethane adhered wonderfully to the SealCoat even without sanding. The project turned out great and I'm so happy I found this product which was very easy to use and produced an amazing result.

Easy to use, looks great, reasonable odor - they all smell to some extent.

I always use Sealcoat under thinned Minwax polyurethane. I mix up a thinned wipe on 50/50 mixture of polyurethane and Naptha over two coats of thinned Sealcoat that I also wipe on. The results are spectacular and almost impossible to mess up. I also have to mention that the price of a quart of Sealcoat here on Amazon is HALF what it is in any of the big box stores!!

Good quality shellac for a variety of applications. I usually prefer waxed shellac for wood surfaces, but this works well if you're going to put polyurethane on over top of it. It dries very quickly as well.

Did quite well sealing some odor from off gassing adhesive on wood.

Perfect sealer for MDF. Low voc. Quick dry. Low sheen

This works great (ish). I read you can use it as a layer between your oil based stain and water based clear top coat. I't hasn't been to long but so far it's working great. *Just a warning, this dries FAST! Like very fast. If it's too thick you'll have lines that are extremely hard to sand out. Do one strip at a time and go from top to the bottom without leaving a puddle at the top. I

No odor and easy to use straight from the can. Latex based with soap and water clean up. Apply with a soft bristle or foam brush. Read the entire can for proper use and instructions.

Good

Tolles Zeug, nur leider schwer zu beschaffen und dann mit hohen Transportkosten

As advertised

Great product as described and delivered promptly.Unfortunately can has been damaged and removing and replacing lid is difficult.Need better packaging for the future.

Works as described in all the wood turning videos I watched