Vivarti Thin Matt Black Picture Frame (61 x 91.5 cm) Portrait or Landscape Photo Frame with Clear Styrene Sheet & Wall Mounted Hook for Photos, Pictures, Posters, Decor, Certificate Frame

I had 2 large pictures 80cm x 60cm to reframe. Lightweight, quality frames like these are hard to find. I have bought from this supplier before so I was confident that the price was worth it. They were well packaged, in perfect condition and arrived as expected.

Great service. Very prompt. I needed a frame for a poster for a Christmas present.Was quoted stupid amount in High Street.It's not the sturdiest but handle with care and it totally does the job and looks great.Thank you.

I purchased two 20 X 30 cm frames for comic book art work and they both look very nice in the frame. It uses non shatter styrene instead of glass but once you install your picture and hang it up you wont really be able to tell the difference. The frame looks good and makes your pictures and artwork look even better on display.The frame does have a decent build quality, however being a budget frame do not expect premium quality. I think if you stick in some nice art work this could make a nice inexpensive gift. I must say installing my art wasn't that easy, the metal clips that hold the back in place were quite stiff and hard to manipulate. For this reason I took away 1 star from my rating. Overall it is a good product for what it is, and its price makes it even better value for money. I definitely would still recommend this frame. Hope this helps

I needed 10 frames for an exhibition so couldn't afford to spend a huge amount per frame. These budget Vivarti frames are ideal. They look modern and sleek and, being sold by Amazon, were very well packaged and not damaged in transit (so many frame sellers don't package well and the frames arrive with the corners dented or the frame damaged).Some reviewers say the plexi glass gets covered in bits after you've taken the plastic off but I had no problems at all and all of my frames are immaculate. My method was to lie the frame on the floor. Have your print next to you! Peel the corner off one side of the plexi glass, then remove in one go. Do not touch the plexi glass. Handling the edges only, lay it face down inside the frame. Then peel the corner off the back, and remove the back of the plastic in one go. Immediately lay your print on the glass. Hold both in place with your hands and turn over - inspect the front to see if any stray bits of fluff have gotten on the glass or print. If so, carefully remove with your finger nails. Put the back on and secure.Bare in mind these are budget frames and you get what you pay for. They're not going to contain proper glass and the back of the frame might be a bit dodgy, but as long as the front is OK that's all you can ask for at this price.

I needed a frame that would be suitable for my sons room, but subtle enough tht it did not look out of place in a small room. The style and finish is what you'd expect from a frame at this price - however the build quality is also on that point. I had installed a spider verse poster in the frame for my son, but noticed when you pick the frame up by either of its sides it wasn't rigid enough to hold its form - even when you hang it using the the hooks that comes part of the frame it still bows, showing the quality and lack of rigidity. I see some people have stood it on their desks, which is fine - for wall mounting it may need a different solution to fitting it to a wall.

It would have cost about £150 to get this poster framed. This frame arrived very well packaged and in perfect condition. I peeled first layer of plastic off then laid it in the on top of the poster, then peeled the second layer. No fluff or bits when done like this. Really easy to hang and absolutely delighted with this product!

The media could not be loaded.  This isn't even nearly the cheapest mass-produced A1 frame on Amazon, so I thought it might be better made than this. It's MDF and veneer, which I don't have a problem with in principle, but for long, thin spans (like the long edge of an A1 frame) the MDF clearly isn't strong enough and was already snapped clean through when it arrived. You can see from the attached video that it's being held together only by the plastic shrink wrap. I would say if you're going to buy one of these, then at least avoid the larger ones.EDIT: I complained direct to the vendor, Vivarti, and they sent out a replacement, which arrived fully intact within two days, so at least customer service is responsive.

Perfect product and fantastic seller

Arrived broken nearly 2 months after ordering....

Súper contento con los marcos. Se adaptan perfectamente a las láminas. Buena compra ñ, recomendable

Cornice solida e perfetta

Llegó roto

Llegó en perfecto estado y queda muy bien.