• Functions - 1. Measures moisture content of soil to lets you know when to water; 2. Helps you determine if is getting adequate light; 3. Helps you control PH level in soil, ic or alkaline is suitable for your s.
• No battery or solar power – No batteries needed, no solar power needed. Just simply insert the meter in the soil area and wait for 10 mins.
• Tips – 1. Watering the soil before testing the PH, or the pointer will not response in dry soil; 2. Tester should be kept in the soil for 10 minutes or more to make sure you get a stable and accurate reading.
• Indoor & outdoor use - Design to be lightweight and portable, easy to carry around for outdoor use, ideal soil test tool kit for home s, garden, lawn and farm, but do not use it to test any liquids.
• Warranty – 12 months since the date of purchase, covering all quality.

iPower 3 in 1 Soil Meter: This Soil Meter help you know your soil clearer and care your s more rational. Ideal Tool for Tester: Compact and portable design for indoor/outdoor use. 1.Let you know when to water. Dry and needs water or wet and could use a day to dry out. You will never over/under water your s again. 2.Help you to control PH level in soil, ic or alkaline is suitable for your s You will never your lovely flowers into high- or Extreme alkalinity soil. 3.Help you to know if getting adequate light. 4.If the Soil Meter's Pointer does not rotate, maybe the s are very dry! It means that your s need to water. Functions: Measure soil MOISTURE, PH and LIGHT levels Easy to use: No Battery needed, Plug and read Scientifically accurate: keep your s in a y range How to use: Simply insert the probes into the soil, and you'll get your reading. Ideal tool for indoor/outdoor s, help your s grow y and strong. Specifications: pH Range: 3.5-8 Ph (3.5-6.5 , 7 NOR, 7-8 ALKALI) Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET) Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HIGH) Size: 6 x 28 x 5cm [2.36 x 11 x 2"] Probe length: 18cm [7.1"] Copper probe diameter: 4.8mm Alu probe diameter: 5.1mm Distance between probes: 1.2cm Color: Green Package Included: 1 x 3 in 1 Soil Tester with instruction guide Package weight: 107g Instructions: Step 1: Switch moisture/pH/light position Step 2: Stick the probe into the soil about 2-4 inches Step 3: Adjust the position of the probe until the pointer on the dial swing slightly Step 4: After 10 minutes, Note moisture/pH/light level in the dial Step 5: Remove probe from soil and wipe clean after each use Important Tips: 1. Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes.Copper and Aluminum itself does not belong to the hard material, so if the soil is too dry and hard to insert, you can use auxiliary agricultural tools drill hole and then insert. 2. Design for testing soil ONLY.Cannot be used to test pure water or other liquid, electrolytic response index will be affected, can only be used to measure the soil. 3. Don't be inserted in the soil for a long time while using. Use cloth wipe the probe so that keep clean and dry and then use. 4. Don't touch fire and stay away from children.