How to use PDR Dent Removal Tool Kits? 1.The high temp glue sticks Yellow with super viscosity and they are used for the hard body and hard part(spread some glue,don't spread too much), moderate viscosity translucent stick are used for the ordinary car which the body are not so hard. 2.Tap down and hail hammer as assistant tools , for some DENT is which is irregular. By the tap down and Hail hammer can quickly repair auto-body dents. different shapes of heads head for different dents. 3、Our special glue sticks, Clear the glue by alcohol after repair. Paintless dent repair steps： 1.Clean where with dents , marked with paint marker pen (red is the best) 2.Heat glue sticks with glue gun ,sticks will be melted in 3 min and then spread the glue evenly on the suitable tabs . 3.In 5-10 minutes, after the glue dried, use dent lift or T bar or I bar tool to connect tab, adjust screw on the top of dent lift, if you use T bar or I bar tool, tighten the handle portion, force the middle of the slide hammer impact Backwards. 4.If there is a smaller dent, you can continueto use smaller tab. repeat the operation steps above until the dents are repaired. 5.when tab is off or the dent was removal,clear the glue by alcohol. 6. If there's some small irregular dent, just use tap down and hail hammer to fix them. NOTE：1.PDR kits used for small and regular dent damage just. 2. Not fit trunk and motocycle ect thick plate. Pack: 1pcs Bridge puller 1pcs 100W Glue Gun 2 x Yellow Glue Sticks(11mmx250mm) 2 x Black Glue Sticks(11mm x 250mm) 2 x White Glue Sticks(11mmx250mm) 2 pcs Plastic shovel 1pcs Gold dent lifter 1 pcs Operation Manual
Trustpilot
2 months ago
1 day ago
