EAG Full Width Front Bumper with LED Lights and Winch Plate Fit for 07-18 Jeep Wrangler JK Rock Crawler

What can I say, I am impressed. I've waited almost 2 weeks since install before writing this review. One of the reasons is for the same reason I subtracted a star.....the wiring and harness that comes with the bumper are not compatible with the OEM fog light connectors. The 4 LED lights each have a plug hanging from them, and the bumper comes with a wiring harness that matches those plugs perfectly. The harness however is made to be run into the Jeeps cab and operated with it's own switch. This might appeal to some, but I do not see why it would since the model Jeep that this bumper fits comes with fog lights that have to be removed for this style bumper. Either way, I am very particular, so I ordered new plugs, connectors, and split tube to cut, splice, and re-wire the LED's to the OEM fog lights. With that now completed, I can tell you that the reviews regarding broken or dim LED lights were not the case here. All 4 operated with all bulbs shining VERY VERY bright. No way I could drive on busy roads with these lights blinding everyone in front of me.Installation was a breeze, both the removal of the old and replacement with the new. This was an easy job for 1 person. The bumper is solid as a rock, the finish is very well done, and the only blemishes int he finish were at the two outside points....undoubtedly just a little rubbing during shipping. When measuring the gap between the top of the bumper and the fender on each side, one side is 1/4" higher than the other. Cant be sure whether that is the Jeep or the bumper, but it really isnt not noticeable even to my overly particular eye.I would not hesitate to order a bumper from this company based on what I received.

Having just purchasing my first Jeep, I knew I had to get busy making it my own. I liked the looks of this grill and thought it would compliment my new lift (4" Rough Country). After installing the lift, I moved onto the new bumper. The install was pretty easy and straight forward. Hardware was included for this. The bumper looked great so I moved to wiring the LED's. Another pretty easy task. I chose to wire them directly to the factory fog light wiring since it was there. Sadly, I must say the light output isn't sufficient for driving in any kind of low light conditions. The light output does not even reach the ground. More than half of the small bolts that hold the LED's into the bumper were loose and 3 of them have fallen out and are now lost. I have yet to install a winch as one isnt needed at the moment so I have no effective knowledge of this as a winch bumper. The so called "D" rings are actually shackles as "D" rings are what a shackle is attached to as an anchoring point. This is a minor point but I hate to confuse people if they decide to buy new ones and go asking for a "D" ring. For what its worth. IF YOU LEAVE THESE ON THE BUMPER, one should never crank down on a shackle to tighten the bolt. It will vibrate down and tighten itself and can be pretty hard to remove. Turn it down until it touches and then back it off and use a zip tie or a small piece of wire to secure it around the body. A little spritz of lubricating fluid will prevent rusting on the threads as well.

The bumper looks excellent. I've had it nearly a year. It was a simple bolt on installation. I wired the lights on it into my old fog light harness. The packaging was a little beat up when I received it, however the bumper looked fine. No rust spots like others have mentioned. The reason I gave this four stars instead of five is because of the customer service. In just a couple months, 2 of the LEDs on on of the middle bars went out. E-autogrilles would not warranty it, and would not sell a single led bar. They wanted only to sell a pair.

This is a real review by a real customer, not an employee of the company or Amazon. Shipping was fast and the bumper was packaged very well. I had to bore out two holes on my bumper because the threaded posts were not aligned properly. No big deal, with most aftermarket Jeep parts you have to mod something. Very solid construction and reinforcement. The LEDs are for show only, they serve absolutely no functional purpose, just makes your rig look cool. I wired mine into the factory fog light harness, and after I shut my jeep off, 8 of the LEDS stay on for about 3 to 5 minutes. Not fully, but very dim, not sure why this happens, maybe it needs a relay or resistors, but eventually they shut off. Over its a good bumper but I'm not betting the LEDS last long.

In love with this bumper. Lights are extremely bright. Easy to install. I just wired the lights up to my factory fog light wires. Leaving an extra power toggle if one of my buttons break. Extremely durable. It feels like it could take a huge impact and survive Pretty well. Heavy. Really gives an aggressive look to the stock wrangler. Fits perfect with the winch I ordered from smitty.No issues with any of the lights or bulbs. Packed perfectly and securely. Arrived quicker than expected. Truly easy install. Hardest part was getting the stock bumper off.Price is a little higher compared to other sellers, but with the satisfaction I have and the understanding that the seller is willing to fix any and all problems; I would not hesitate to purchase again if need be. Definitely by far my favorite addition to my jeep so far.

Great bumper, a lot stronger then I expected it to be for the price point. Looks awesome and the lights are eh but help a little, and look sweet, would have rated 5 stars but when I received the bumper one of the circle lights was out only 2 of the 4 LED's in the passenger side circle light were out but I contacted the company and they were very good about sending me not only one but 2 replacements for free! Satisfied with bumper and customer service!!!

Bummer doesn’t Hold up well over time purchased in February of 17’. Right after the one year mark the led lights had one side of led light go out contacted seller but was told it was out of warranty. Now it’s totally rusting out. Looks like I’ll have to replace the whole thing.