Door Draft Stopper 36 Inch Door Draft Blocker Door Guard Reduce Cold Air, Light, Odor, Soundproof Door Sweep for Bottom of Door Weather Stripping Door Seal Fit

It wasn't what we were expecting. The product is poorly made.

This works pretty well. Most winters we could notice a draft near the bottom of our front door. It's an old house and an equally old door that we're not in a hurry to replace. This has worked and the floor around the door is noticeably less cold and you can't feel air moving near he door. The build of the product itself is definitely not going to last forever, depending on how much it drags on the floor and what kind of floor it's dragging on, etc. But this is inexpensive enough that if I have to replace it in a few years I'll still feel like I got my money's worth. Installing it was pretty simple, you just trim the edges so that it matches the width of your door. It's not bulky so you barely notice its there. So far the velcro strip has stuck to the door without issues.

Great

Simplicity at it's finest... our fireplace is nearly 100 years old, is going to be repaired very soon, and we'd had a huge piece of cardboard blocking it, which you can only imagine how it looked.This cover was very easy to install and the foam base/draft stopper was simple to adjust and cut to size. The hook and loop closure is very strong and connected solidly. Being such an older fireplace, there was an approximately 2/3" gap at the bottom; I just re-adjusted the Velcro lower and now it is sealed.We can tell the difference not only in the comfortable temperature of the living room, our oil furnace hasn't been coming on as often. A good buy and, if your home is a bit more rustic/vintage, this is a perfect accent.If you don't have a hair blow dryer, I simply turned our living room space heater on high and it softened the material so I could measure and cut. The space heater has not been turned on since it's been installed.The adhesive for the hooks is very strong, recommend holding securely in place for about 30 seconds, then going over it with something hard but smooth, I used the back of a Sharpie, making sure all the air bubbles are gone for a solid seal.A very sound purchase...

Does the job. My only issue is that the foam bits stick out the ends a bit and I don't know how to fix it. Makes it look a little cheap