Sight Pusher Tool for Handguns Heavy Duty Pistol Sight Pusher Tool Maintenance and Sight Adjustment Removal Tool

First and foremost, the build quality was outstanding. Made from durable materials, it felt sturdy and reliable in my hands. The design was well-thought-out, with a comfortable grip and smooth operation, ensuring that I could make precise adjustments without any difficulty. The ease of use was truly remarkable. With clear instructions provided, I was able to install the sights on my pistol within minutes. Adjusting the sights was a breeze, thanks to the intuitive design and adjustable components. Whether I needed to drift, push, or remove the sights, the tool provided the necessary functionality, allowing me to fine-tune my pistol's accuracy to my exact preferences. What impressed me the most was the versatility of the pistol sight pusher. It accommodated a wide range of pistol models, including popular ones from Glock, Smith & Wesson, Sig Sauer, and many more. This versatility made it a fantastic investment, as I could use it with multiple handguns in my collection. The tool also had adjustable features to accommodate different sight sizes, ensuring compatibility with various firearms. One of the standout features was the precision it offered. The sight pusher allowed me to make micro-adjustments with utmost accuracy, resulting in consistent shot placements. The tool provided excellent stability and control, eliminating the need for excessive force or guesswork. This level of precision was a game-changer for me, as it significantly improved my shooting skills and boosted my confidence on the range. Furthermore, the pistol sight pusher was designed to protect the sights from any potential damage during adjustments. The tool held the sights securely, preventing any scratches or dings that might occur from traditional hammering methods. This feature alone made the sight pusher a worthwhile investment, as it helped preserve the aesthetics and value of my firearms. In terms of value for money, the pistol sight pusher exceeded my expectations. It offered professional-grade performance at a reasonable price. Considering the cost of having a gunsmith adjust your sights every time, this tool quickly pays for itself. Moreover, its durability ensured that it would be a long-lasting addition to my gunsmithing toolkit. In conclusion, the pistol sight pusher is an absolute game-changer for anyone who wants to take control of their pistol's accuracy. Its top-notch build quality, ease of use, versatility, and precision make it a must-have tool for firearms enthusiasts, competitive shooters, and even professional gunsmiths. With this tool in hand, you can fine-tune your sights with confidence, resulting in improved shooting performance. I highly recommend this pistol sight pusher to anyone seeking to enhance their shooting experience.

This thing is awesome. I’ve bought a few cheaper sight pushers over the years and absolutely hated changing sights every single time. A buddy asked me to swap the sights on his Bodyguard 2.0 and, like a complete moron, I agreed before doing any research. After the sights completely refused to budge with my cheaper pushers, I looked into it and discovered the Bodyguard 2.0 is apparently one of the circles of hell when it comes to sight changes. Did another round of research to see what actually worked for people and landed on this one. Zero regrets. Had the sights changed within minutes of opening the box, with no damage to the slide, the sights, or my rapidly deteriorating self-respect. Fantastic quality, very well thought out, and incredibly easy to use.

I was surprised by the capability. It even worked on my impossible Bodyguard 2.0 rear sight. It was difficult and I had to use two big box end wrenches for extra leverage on the handle and to hold the base in place even when it was mounted in my vice. I also had to apply some heat and some penetrating lube. Due to the tiny size of the slide it ended up bending near the ejection port so I recommend putting something solid that’s the same width as the barrel breech in the slide while pushing sights to prevent this problem. Leave it to S&W to put their sights so far off center and then make them so difficult to move. The front sight was no problem. I’m excited to have this for future use. I don’t see a need to buy the more expensive version when this is strong enough to bend the slide with no damage. Good quality especially for the price

It works well. Recommend tapping on it with a brass hammer, between turns, so the threads do not strip. I do not like the left hand threads. Good price

This tool works great as designed. A few items to consider if you purchase - 1) the tool has no lubrication on the main drift screw. Before use add some anti-seize compound or heavy lithium grease to the threads and work the screw from end to end to coat it before putting it under pressure. 2) Sights being removed may be loctited into place or have set screws. Remove set screws and then use a drift punch with mallet to get the old sight moving. Remember it has been repeatedly hammered in place and may be in a slight indentation in the dovetail. This is the likely cause of seeming to need more pressure than the sight tool hand crank can deliver. 3) cut some strips out of a plastic milk carton to shield your slide. It is much better than tape. You must cinch down the slide both on the sides and on top to keep it from twisting. 4) Before removing old sights - put the new sights in a freezer to shrink them a bit for easier installation. Take them out just before installation to keep them as cold as possible. (one at a time is best). For more slack - put the slide in the sun or under a heat lamp to warm it up after removing the old sights. 5) When the sights are lined up on the dovetail you will not need any more pressure than hand crank to install. If you experience more - check dovetail alignment - slightly out of alignment can jam it up very tight. Be patient and check and recheck. 6) A depth micrometer or caliper with depth measurement is very handy for lining up dead center on the slide. Done correctly you will be very close to zero if not right on it.

STAY AWAY FROM THIS PRODUCT!!!! I bought this to change the sights on my glock 19.. item arrived looking used and abused. They have some cheap stickers to prevent scratching your slide when in the clamp. Well those stickers peeled off while shipping and the glue from them are everywhere. The handle broke off, it's just a set screw basically holding it on. Yes, after all of that I was determined to put my brand new sights on.. boy was that a mistake.. the way the product is designed it clamps down off center.. so it leans forward. I didnt realizing that so I was turning the handle as it tilts forward.. sliced the groove on my sights so that sucks.. This is just the absolute worst sight pusher on the market. I thought it would be better than a $20-30 one.. absolutely not

This worked very well to get the rear dovetail sight off of my M&P9 shield plus. I still had to use a non-marring hammer to smack the side of the jig, but I would have never got my sight out, had it not been for this tool. That being said, it is very durable and compatible with many different sight styles.

Needs some disclaimers. - There is no instructions, not super trivial, but you will need some mechanical knowledge or lookup some videos. - You'll probably want smooth jaw calipers (I recommend KNIPEX) to have enough leverage while still being smooth - Reversed threads for the locking feet. That will get you about 90% there to making this tool work. The remaining 10% is dependent on what you are working on. I purchased with the intent on installing a replacement Trijicon HD XR front optic as my FLL broke the tritium dial on the front sight when they did it on my FNS-9C. So imagine my enjoyment when the slide wants to twist against the feet even when I used tools to lock the feet in place. This is from the glue used on the pads, it just doesn't hold up to much pressure. This is the easiest area they could improve the tool. Different (textured) pads and better adhesive. The front sight is a very close tolerant fit, so maybe this just isn't designed for that as it is a universal set-up, but my guess without trying a different firearm is this tool isn't really designed to change out the front sights. When I got it roughly centered (you can see it isn't quite centered), I was able to throw my barrel and spring back in the slide with a boresight laser and align the rears relatively easy. Just needed to stop and recheck in order to see as you can't look through them. Still waiting on a chance to go test fire for the alignment but that isn't really related to the tool. Disappointed is how I feel about it. It worked but I had to do a lot to make it work. Good luck without having strong mechanical background and basic idea of gunsmithing.