HOPOPROBidet Attachment for Toilet, Non-Electric Bidet Ultra-Slim Dual Nozzle (Feminine/Rear Wash), Fresh Cold Water Sprayer Bidets for Existing Toilets with Adjustable Pressure Control 1-Min Install

The media could not be loaded. Finally, an add-on bidet that can work with a one-piece skirted toilet!They have done their best to make this an easy process, but if you have the kind of toilet that I do, it's still going to require a learning curve to be overcome before the install will be finished.I have a one-piece skirted toilet that was installed very close to a wall. This required me to unscrew the water inlet connection pretty much blind. Then I had to install the t-valve that would split off the bidet add-on part from the water supply up underneath where the tank would be. I decided to wait to install the stainless steel braided part that goes to the bidet only once I already had the t valve on The toilet is also very close to a tub shower combo so there was very little working room.The design of this is such that it can work with these kind of toilets. I had attempted to try another brand before this and it was completely incompatible because it was made for a two-piece standard toilet. So if you have the one piece or the skirted style this is one of the ones that you can add on to it that will work.It's pretty unobtrusive however, you can tell it's there when the lid is closed because the parts that hold the bidet on are large enough that they stick out beyond the original lid hardware. That's because this add-on is meant to go underneath your existing toilet seat and then you secure it when you secure the seat itself back down. It was a little tricky for me to get this. It involved having to tape a holder for a screw in place lining everything up several times before finally screwing it all down. So though my installation was difficult that's because of the way my bathroom is set up and not because of the manufacturer. I would say that they went out our of their way to make this an approachable project for a novice to do.Once on it seemed to operate just as advertised. It seems like it will be easy to clean. There were no leaks and all of the parts that were included seem to be decent quality. There's nothing uncomfortable about it once you get it adjusted. Just know that it's only cold water since there's no electricity making this easy to install but also just an alternative way to wake up on a cold winter's morning!It has a lever that you either push down or pull up depending on what you want to do. The further you push or pull it the stronger the pressure will be. If you leave it neutral and flush like normal, nothing will happen of course. So no fear for those who really don't want one but to have a shared toilet. They can just not use it flush normally and nothing will change there.I was very happy to have a solution for such a tricky toilet type and install. If you look at subreddit, it's about one piece toilets and the issues people have with them. You'll see plenty of plumbers aren't big fans! I feel like the manufacturer went out of their way to try to make it easy for a regular person to do.

If you are looking to get a bidet, don't get anything fancier than something like this. It just isn't necessary. I had one previous to this one and it had an on/off and then a dial to adjust the spray. It also supposedly had a spray for the front for ladies who want to freshen up and one for the back end. I never could get the aim right or the right amount of pressure for the spray. Really, you just need something simple. This one is super simple with one lever and you can adjust the strength of the spray by just pulling the lever a bit more. At the time I bought this, it was just under $24 on sale. Totally worth paying even more to have something that works so well and keeps you clean.

So delighted with these. They were a breeze to install. I have one in each bathroom and feel quite upscale, as well as clean. A full-featured bidet is out of my price bracket plus would require additional wiring. Instead, for $25, these have the key bidet features without requiring electricity, nor batteries. I’ve ordered some reusable wipes for drying, and it looks like a lot of other bidet owners do the same.

Good bidet. Had to adjust sitting position for the water to hit the right places.Adjust pressure gradually, from low to high, the highest pressure is brutal if you are not used to it.Overall, is a good bidet and it looks better than my previous one.

I had an outstanding experience with HOPOPRO. The service was prompt, professional, and exceeded my expectations. They were incredibly attentive, friendly, and went above and beyond to ensure my needs were met. Their knowledge and willingness to help made the entire experience seamless and enjoyable. I truly appreciate their dedication to great customer service and will definitely be returning. Highly recommended!

Totally amazing Super easy to install,I've never used one before. And I'm amazed, I now we'll be installing them in my other two bathrooms.

bought this when my now discontinued bidet attachment broke in half. this one has a slim profile, i didn't even have to change the hoses when replacing it, it sits more level with the seat, and the water pressure is so easy to adjust. my previous attachment was 2x the price and did not have a feminine wash. no leaking, no issues, just a great bidet at a reasonable price.

Money well spent! Easy to install and works great for the price I bought 2