Specifications: Brand: Yartar Weight: 400g Gear range: 9 mode strength Size: 6.5*1.33inches Charging: USB cable Material: ABS body and steel needle EASY TO USE: CHARGING: 1. Connect the pen through USB adapter(Phone Adapter/Computer/Power Bank) to charge before use. 2. When the LCD display show charging is finished(about 3-4hours).To use, unplug from the USB. OPERATIONS: 3. Unlock the pen if locked: Quickly short press power key, then the "OUT" key. 4. Long press power button to turn on the device, and press "OUT" key to work. 5. Long press ON/OFF button for about 2 seconds to power on or shutdown. 6. Short press ON/OFF button to switch the speed level,when the pen is on. 7. Keep pressing the OUT button to start work, and tap with the pen to work through the mole. TO INSTALL NEEDLS 8. Insert the corase needle into the head of the pen and tighten clockwise. 9. The fine needle should be used with the needle cap. Rip the fine pinhead into the needle cap, and then insert the pinhead cover into the head of the pen, and then tighten clockwise. 10. Sterilize the fine and coarse needles by boiling them in water or wipe them with alcohol pad for disinfection before use. 11. Use alcohol to clean your skin, for professional use, apply pain relief cream to local anesthesia for 15-30 minutes,hold the pen at a slight angle, gently sweep back and forth with a small strength, Carbonization can not stay in one place for a long time, it's enough till the dark spot been flat, to avoid burning the dermis layer to cause scars.The darker region is recommended to be divided into four or five operations.It's better finish with a healing gel or strip. Note: Avoid the touch of children. 2.The color just for reference only,as different monitor,color will slightly different from pictures shown.
Trustpilot
1 day ago
2 weeks ago
