Coram ShowersSFR80CUC 1400mm x 800mm Bathscreen, Chrome Finish, 5mm Thick Clear Glass

Contrary to the manufacturers claims, this one was a nightmare to fit. I've been on with it for two days now, and it's still not quite right. The instructions fail to tell you that you must place the bracket support with its lower edge right down on the bath rim; this being because there is no vertical adjustment at the hinge end, of which more later. There was a small piece of silicone mastic under mine, and it meant that when I got the whole thing done, it rode about 1-2 mm clear all along the seal. I then had to start again completely from scratch. Once the bracket is on, the screen is fixed by two screws, which should be dead easy, but it isn't. The problem is that the screws are quite deeply recessed, and the lower one is very near the bath edge. You can't get even a long reach screwdriver in to tighten that one because the driver handle bearing on the bath stops it from engaging the screw properly. You can't get a long pozi bit in either, because the recess isn't of a large enough diameter. I had to grind down the hex edges off a perfectly good Makita bit, until the shank was cylindrical, then use a 1/4 inch sq. dr. ratchet with the universal joint and extension. That did it. However, even with the bracket now right down on the bath edge, the seal was still about 1/2 - 1 mm clear of the bath at the hinge end, and there is no way to adjust for that. For now I have eased down the seal on the glass until it touches, but it isn't a perfect solution. I would send the damn thing back if it wasn't for the fact we wouldn't have a shower, and I've drilled all those holes in my new tiles. It looks great, if it would only work. Having read this over again perhaps two stars was over-generous.

Previous screen of a different make leaked at the bath / wall join. This one is perfect, fully adjustable and no signs of any leaks, best I found!

very good, delivery was excellent

Exactly as described. Works perfectly.