iPhone 6s Plus Case, Armorbox i-Blason Builtin Screen Protector Heavy Duty Shock Reduction Bumper for Apple iPhone 6 Plus 5.5 Inch (Black)

i bought the iPhone 6+ last week not knowing there's almost nothing in the stores currently to protect them. The sprint store wanted me to buy whatever they had, although I never looked because I planned on shopping here. The local box stores didn't have any cases for the 6 or 6+, so Amazon was my only hope. I read a lot of reviews on cases, and have bought 4. This is the first case I received, so I'm commenting on it after one day.To me, I think this is a tremendous case for the $20 or so I spent on it. People are complaining about how hard it is to install. I've had my 6+ in and out of this case 3 times just messing with it. Is it difficult to install or remove? Only if you have half a brain and no dexterity! You can snap this case on, or take it off in less than 30 seconds.This case is nice and sturdy once installed. The top portion with the plastic screen protector does feel flimsy during assembly, but once snapped in, it's an integral part of the unit. This won't protect as well as an otter box defender, but until they come out, this will probably be my case of choice. The screen protector does have a cutout for the fingerprint, so if you work in dusty/dirty environments, debris will get under that area and pit your screen. I installed a tech armor ballistic glass screen protector which is stronger than the plastic screen protector on this cover. When the tech armor glass is installed on the iPhone, the added thickness causes the plastic screen cover on this case to bulge out, causing a gap between the glass and plastic protectors, which is somewhat annoying. They weren't made to work together. If I keep this case, I may remove the plastic screen protector to fix this issue. It's not the fault of the case or the tech armor glass. They just don't work well together. With the glass and plastic screen protectors, I haven't lost any touchscreen actions, other than the slightest miss hit from the gap mentioned before.I hated carrying my 6+ all by itself, because Apple made the phone slim and slippery. Those two things make it almost impossible not to drop. This case is mainly plastic, and the slightly larger profile and the shape and texture of the case have increased its friction in your hand. It's still somewhat slippery, but has probably reduced my likelihood of dropping it by at least half. The back has itty bitty rubber nubs that keep it from sliding around on a table.Appearance-wise, I think it's a good looking case. I bought the blue, which is kind of an odd shade of blue. A royal blue would have been better. The main improvement I would recommend for it would be a little more rubber around the outside to increase grip. That being said, I still give it 5 stars for being an excellent case for the money. I'll give an otter box a chance when they finally get their product to market, but I'll always keep this case handy for now. I think it's great.I was worried about reading some of the negative concerns on this case, and got nervous I had ordered a bad one. Those people must drive with their nose up in the air and only eat Godiva chocolate. I'm your average guy in Indiana, and this is my take on this case. I like it. I don't think you'll regret this purchase.******UPDATE 11-17-2014*******Well, I've had this case for a month now, and I still love it. I did remove the plastic screen protector. I have the Tech-Armor ballistic glass screen protector installed, so I opted to get rid of the screen protector. I'm glad I did. This just feels right, now. I have dropped my phone once from about 2 or 3 feet, and it was fine. I don't think it would survive a 6 foot drop, but I'm somewhat careful. I wish it had a belt clip option that I could snap over the front to offer additional screen protection, but for what it is, I love it. The Otterbox Defenders are out now, but I'm waiting for them to have better reviews and drop in price. This will be my permanent case until then.

I bought this as a temporary case till the OtterBox cases came in stock, but have since decided I won't be forking out $69.99 for an OtterBox. YES, I am that pleased with this case! This review is based on the WHITE case. I am using this case on a WHITE iPhone Plus. My 5 Star Review is based on the following:5/5 - Shipping [I used Amazon Prime and got the item in 2 days as expected; no wait/no delay.]5/5 - Packaging [It came in a no frill cardboard box, but it was packaged well and had peel off plastic protecting both sides of the screen protector.]4/5 - Initial Impression [I took away one star because the case looked warped; however, once it was on the phone, it looked great.]5/5 - Instructions [The address is given for a video for the install. I recommend you use it.]4.9/5 Install [I didn't want to take time out to watch a video so I deducted 1/10 of a star. Call me lazy. A printed diagram would have been better for me. I do recommend you watch the video or you may have a teeny bit of difficulty installing it as you may do it the wrong way.]5/5 - Aesthetics [I love the look of the phone. It is a sleek case. Looks great once the phone is in it!]5/5 - Screen Protection [I have clear, NON-foggy screen, NO gaps between the touch screen and the protector, NO problems at all with touch screen functionality! It's satisfactory protection!]5/5 - Drop Protection [Yes, I've dropped it. No issues! I feel protected!]5/5 - Speaker Output [I'm pleased, but I don't use external speakers that often so bear that in mind. I don't have much experience to compare by.]5/5 - Port Access for Charging & Headphones [The ports are covered and easily accessible. They are snug when closed.]5/5 - Dust protection [Now I haven't been in an actual dusty environment, but I was baking and poofed a good amount of bread flour from the bag on to the iPhone. I blew the dusty flour off and then followed up with a dry rag. To my amazement, I didn't find any bread flour under the screen, so I think it will do it's job under normal circumstances.]5/5 - Durability [After poofing it with flour, without thinking I took a rag to it that was kind of rough. I just knew that between the flour and the abrasiveness of the rag, I would find scratches on the screen, but I DID NOT! That makes me confident in knowing the screen won't scratch easily.]5/5 - Fingerprint Scanning Area [This works wonderfully! It's not inhibited in any way.]5/5 - Camera Use [The case doesn't inhibit the camera or the flash.. both Front and RearView Camera work perfectly as if the case wasn't on the iPhone.]5/5 - GRIP, GRIP, GRIP [Love that this phone has some grip! The black part of the case going around the phone is textured and rubbery, but not that sticky rubbery feeling that holds lint! It's just enough to get a good grip! If you have a problem with cases that allow your phone to easily slip from your grip because you are busy.. this is your case! Grip Happens! <3 Grip! LOL!]Hmm... I guess that is about it. If I left something out, feel free to ask me. I'll tell you to the best of my ability.Overall, I think the i-Blason case is a good buy whether temporary or permanent iPhone 6 Plus protection. I'm quite pleased with the look, feel, quality, and protective ability of this phone case. It's no longer my temporary fix as I initially thought it would be! I'll be keeping this case and may possibly buy another one in different color!-------------------------------------------------NOTE -- I AM NOT IN ANY WAY AFFILIATED WITH I-BLASON, ITS MAKERS, OR ANYONE WHO SELLS IT! I BOUGHT THIS CASE ON AMAZON ON A WHIM! GLAD I DID! THANKS I-BLASON!

I got this for my new iPhone and I am extremely happy with my purchase! I have used LifeProof and Otterboxes in the past and spent $100 or more on each of those cases and they all failed in some way. The Otterboxes were way too bulky and were difficult to get in and out of my pocket so I found myself carrying around my phone in my hand much of the time. The LifeProof cases had problems with getting the screen covers to lay flat on the screens. No matter how many times I tried to rework it there were always air bubbles under it. I also thought it was WAAAAY overpriced for just a cheap piece of plastic! At least with the Otterbox I felt I was getting something substantial for my money...too bad it had to be as big as a brick!So I researched cases for a month when I got my new phone and found this one on Amazon. I really liked the color and the looks of the case and the reviews all seemed to be positive...which you still have to be careful about because alot of these reviews are bogus, but I decided to give this a try because the price was too attractive to not. Even if it wasn't what I wanted I wouldn't be out very much money. But I got it and I love everything about it! Color is perfect, size is perfect, quality is beyond what I expected at this price point. I have dropped my phone several times and the case has protected it perfectly! The screen protector is great too! It laid flat the first try and had no bubbles at all. It's not waterproof, but that's ok, I don't ever go anyplace that I would need that type of protection anyway. Love this case...you will too.

Just as described. This is. My 2nd case like this and it’s great. I get about 1 year out of them but I drop my phone a lot and this is the best one for me. Arrived fast and fits perfect.

Please note very carefully the sizing written in the description. This brand of phone cases has very detailed description. Read it.This review is for the iPhone 6+ phone caseAs you can see in the photos. It has a plug for the volume/mute, and the headphones and charging portUnlike the iPhone 7+ model of the case. This one. For the 6+. Does not come with belt clip. However. It does FIT into the 7+’s belt clip❤️The plastic on the 6+ model seems to feel cheaper in quality but this is actually due to the way the front is cut out. It’s the same plastic as the 7+. I’ll admit it feels thinner but it is the same.The 6+ was harder to install. And many people reviewed they returned it due to it not fitting their phoneIt does fit. You need to slip in the bottom of the phone. Into the black sleeve first. Then work the left side of your phone into the sleeve. Finally. You need to push fairly hard. To get it to snap in on the right side. But it does fit. And if you do it right the plugs will close back up after you open them to charge the phone etc. It does take patience. And no. You won’t break the screen protector. So long as you only press down on the coloured plastic areas and stay close to the rim.

👌

pour les maladroits comme moi qui font tomber leur iphone plusieurs fois par jour cette protection est pour vous. Elle est super résistante et dispose déjà d'une vitre de protection. c'est moins joli pour ceux qui veulent monter le dos de l'iphone mais c'est un vrai coffre fort d'une marque réputée. Je recommande vivement

Excelente producto y duradero. Todavía está en uso despues de 3 años