How to use this paint less dent repair kits from Weylon? 1.Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3. Glue a Tab with hot melt glue: - Use Lifter or T-shaped repairer : Glue a Pulling Tab with hot melt glue on it's back by glue gun tool; 4. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 5. Pull out tabs(24pcs): - Use Lifter: Screw the rotary axis of the Lifter to find a perfect range for the spring which can pull the tab out. Then press the handle to pull out the tabs directly; - Use Bridge Puller: Adjust the three screws' height to find a perfect place for the Bridge Puller, then pull out the tabs directly; - Use T-shaped repairer: Align the T-shaped repairer and press the drawing tabs with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Clean the repaired place with a clean wet cloth. 8.We wear the Weylon instructions (usb falsh drive Weylon), you can be inserted into the computer, to view the instructions. Pack list :1pcs 2in1 T-bar 24pcs Purple tabs 5pcs White tap down 1pcs 100W Glue Gun1pcs Metal tap down with 9 heads 1pcs Empty Spray Bottle(capacity : 30 ml) 4pcs Yellow Glue Sticks(11mmx270mm) 4pcs Black Glue Sticks(11mm x 230mm) 4pcs White Glue Sticks(11mmx270mm) 1pcs Rubber hammer 2 pcs Plastic shovel1pcs Red mini T-bar 1pcs Gold dent lifter 1pcs Dishcloth 1 pcs Operation Manual card 1pcs Yellow Bridge puller 1pcs Tap Down Hammer1pcs Tool Bag1pcs Line board
Trustpilot
1 month ago
1 week ago
