Kuryakyn7509 Motorcycle Foot Control Component: Driver Floorboard Extension Spacers with Bolts for 2009-19 Harley-Davidson Motorcycles, Gloss Black

Recently purchased a 2014 Street Glide Special which came with a Screamin Eagle Chisel Extreme Billet Air Cleaner kit. Love it, but my shin would slam into it while riding (side note, I'm just shy of 5' 9"). These spacers installed in about 30 minutes, and put my legs in the PERFECT spot.Pros: My shin no longer bruises from the air cleaner! MUCH more comfortable riding position, even for a shorter guy like me.Cons: The 3/4" difference puts my feet in the perfect spot to catch the wind at highway speeds, forcing them outward from the bike. This is causing a lot of leg fatigue as I'm having to fight the wind constantly. This is not a fault of this product, however, so no stars deducted. Looks like lower fairings and highway pegs are in my near future!Overall: This is definitely a MUST have mod for my SGS! Thanks, Kuryakyn

I have been annoyed with the stock floorboard spread on my Harley Ultra Limited. Half of my foot was hanging off the side of the floorboards unless I cocked my feet at odd angles to get them on. Despite these only being 3/4" per side, they make a huge difference. The spacers are high quality, as are the included bolts. The only thing you reuse are the nuts for the front floorboard bolt.My bolts were not overly dirty or corroded, so they came out fairly easily. If you have lowers, make sure you get the floorboard seated so it is above the fairing when you start driving bolts or you can cause some damage. Add a little blue locktite as well. You probably don't want these to backout while you're on the highway!They seriously went on in about 10 minutes. Overly simple - 4 bolts with lock washers and four spacers that are easily identifiable where they go.

Arlen Ness Deep Cut floorboards were a bit cramped. In fact, the rear brake arm was rubbing ever so slightly on the floorboard. These 3/4" spacers rectified that completely. Plus, it makes for a more comfortable riding position. There are less expensive alternatives, but this spacer kit was one of the only ones I could find that came with stainless hardware. While they were a bit expensive, I feel much better knowing that the hardware won't rust. Would definitely recommend to any rider looking to space their floorboards out a little further.

Easy to use went together no problem

These work as expected, providing much more usable real estate on the floorboards of my '20 Road Glide. This is how the bike should come stock. I combined these extensions with an extended brake pedal for a great result -my entire boot actually fits and rests easily. Easy to install, there was only one way for it to go on. Bolting these on with the extended brake pedal, which required nearly removing the crash bar and working around behind the exhaust rather than removing it, the whole job only took about 45 minutes at a relaxed pace.The reason I'm giving the Kuryakyn floorboard extender kit 4 out of 5 stars because of the price. Outrageous. The setup for previous year models gave even more space and was half the price.Overall I am satisfied with the parts installed and would recommend them to anyone looking for more leg and foot room on the floorboards.

Just order it! The 3/4 inch extension of the foot boards made a huge difference in comfort. I have a 2 inch extended seat and the SE stage 2 filter, so my right leg had to stick our a lot. These now let my feet stay on the boards more comfortably.

I installed on a 2011 Harley Ultra Classic Touring Bike. Wow, wish I had purchased earlier. Installed easily and allows for more room on the floor boards. I did purchased (separately) an extended rear brake pad/peddle by Kuryakyn, but its not needed. I have large feet/boots (size 13/14) and whether with the stock header pipes or aftermarket pipes, I was always hitting up against the header pipe and feeling cramped with my feet on the floor boards. This "kit" is a simple, well made, do-it-yourself, install that you will really like (I do)!!! All that is needed is one socket wrench with the appropriate driver to fit the bolt (same as stock) and I used some blue (medium) Locktite on the threads to ensure nothing vibrates loose since I don't see myself ever swapping out.

These make riding much more comfortable! Didn't take too long to install and has a factory look to it. Some folks have said they had problems with the bolts, I didn't have any problems with the bolts or installation. It makes the ride more comfortable by helping get your knees away from the gas tank.

Spacer kit fit perfectly and bolts had correct thread unlike no name kits

Good product, fast shipping. Used on 2019 Roadglide Ultra.

Great product Fits perfectly on a 2018 streetglide

Ça éloigne les reposes pieds tel que décrit,produit de bonne qualité.

Les boulons sont plaqués "zinc" et non en acier inoxydable comme indiqués.