Maylit ICRGB TV LED Backlight, App Control Lights for 37-70in Monitor, Music Sync Color Changing Strip Lights for Home Decor, USB Powered Gaming Accessories for Bedroom Room Decor

Okay these lights are pretty darn cool but there are some things that could make them better and some things you should know-- why? because the instructions are just meh.First, the package states that it has 3 rolls of the LED lights. Mines came in one. You can separate them and add the extra connectors that they've provided. Don't connect them immediately. Unravel the strip and put the USB into your tv. This will allow you to see where you want to place the light strips for the best effect. This is important because it will make the difference. The instructions for my 46 inch says to wrap but I actually placed mines on the sides of my tv. They aren't as discreet but you can only see them when you walk really close to the sides. This gave my tv the best lighting because my tv is mounted pretty high. I can't stress this enough because if I had placed the strips similar to the instructions then I would have thought these weren't bright. Everyone's tv to wall ratio is different.This may be common sense, but also install while in a dark room or dim lighting. Top of the morning is not going to give you the true effect of what it may look like and thus you may place the strips too far back on the tv or too far up depending on your wall to tv alignment.Once you've decided where, add the connectors one buy one leaving the end strand without a connector. I also kept the lights plugged in (idk if that's safe) to make sure that all of the lights were lighting appropriately. Glad I did because one of the connector strips didn't work and effected the light output. The first strip was pink, the other strips were blue. If you attach the adhesive first, then you will have to pull off, risking the strength of the stickiness, to put back on correctly. It's doable but not worth the hassle.The brightness adjustment on the remote matters. So I bought this because I wanted the pink light-- and solely the pink light. When I had the brightness all the way up, I could not see the different colors. I thought it was defective because even the pink color looked blue (which makes sense given color spectrum etc). So, make sure when you turn on the remote that you dim the brightness as much as possible so you can see all the colors.Now it's time to remove the adhesive! My adhesive was pretty darn good. The USB part also has an adhesive part. Make sure that you place the USB and adhesive to wear it is easy to pull out without messing with the adhesion (will make sense later).It is BRIGHT y'all. There is no "dim" feature. What I mean is although you can adjust the brightness, you cannot adjust the volume of light. By adjusting the brightness you are adjusting the color's brightness (ie from dark pink, to hot pink, to light pink) and not the light's strength/intensity. I thought i would be able to adjust the strength for nights that I don't necessarily want to feel the vibe but no. A minor flaw but I have a diffuser with a LED light so this doesn't necessarily bother me but may bother others. It's also $14 (at the time of this review) so I mean I couldn't ask for more.Here's what I DO NOT LIKE. There is technically no "off" position for the lights if your tv is on. If you turn "off" on the remote, the lights go red. It isn't until you turn the tv off (or power source) that the lights completely shut off. You can also take out the USB cord to cut the lights off while still keeping your tv on. This is why it's important to place the adhesive part of the USB cord where you can easily remove without having to mess up the adhesion. This is honestly minor but good to note when installing as to make sure the position of the USB is easily accessible and/or to appropriately place the lights for 24/7 viewing.All in all-- the product is great. The price point is great for what you get even with the "off" situation. The quality is also great. The color variations are great, as well. A couple reviewers stated that the white is not white but rather a blue and this is true. I would buy another just for keepsake-- that's how much I love them. It is definitely a vibe and elevates any room, any watching experience.

Yes very cool perfect behind tv at college.. super easy to apply and boys love using their college color as back light!

I used these lights for the back of my tv and it was perfect! i love it all lit and the length was great. Make sure you know how big your tv is before u buy. The colors are vibrant and i love how it comes with a remote for easy access to change the colors!

What I DON’T like:It came with corner connectors so you can cut it on the dotted lines where needed and add corners, but the directions said not to cut it. I believe it said “NEVER cut.” Soooo we ended up with funky corners (pictured). I would have cut it and used the connectors it came with, but the directions said not to and I didn’t want to ruin it and be out the money for it. It’s also not as bright as I’d like. In these pictures (one with the overhead light off, one with the overhead light on), the brightness is all the way up. That’s as bright as it gets. The brightness is very underwhelming, but the color covers enough space I guess. It barely covers outside the perimeter of the TV, but it works. With the LED lights around the walls, these are almost unnoticeable. It was also hard to install without cutting, because I had to figure out how to get it all the way around without blocking the HDMI ports. I ended up just doing three sides of the TV instead, because I couldn’t even use the corner connectors to make some corners to go around the HDMI ports. Instructions were also very lazy and unclear. There’s pictures, but virtually no words. It does, however, list the warnings…. Like don’t cut the lights.What I DO like:It is very sticky. I unstuck and restuck several times during installation and it still stuck great. I like that it changes colors, you can pick the colors, and the remote seems to work very well. MAKE SURE you leave the receptor hanging towards the bottom though, because the remote does not work unless it is pointing directly at the receptor. If you have the receptor behind the TV, it will not work.For my seven-year-old’s room, it works. He’s thrilled to have it. But if it were for my room, I’d go with a different brand honestly. I like them, but there are way more cons than I’d like.

Definitely not the best, but amazing for the money. I bought mine for less than $10 and the value is great. The app works better than expected and the brightness isn't mind-blowing, but for the money I would imagine it would be near impossible to get anything better.

I installed this product on my 58’ Samsung which was the perfect size to go up the sides and the top of the tv, the strip is not big enough to do the bottom but that wasn’t a problem for my particular tv because that’s where the speakers are and with it being wall mounted it would be too close to the wall. The adhesive on these lights is great and stick to tv great (I made sure to clean the dust off the tv first for the best adhesion). All in all it looks great and turns on/off with the tv.Great buy especially for the buy.Only gimmic but does not bother me is that the lights are changed with an IR remote so if you install them to the back of the tv you can’t exactly change them unless you walk up to the IR sensor which might annoy some but I think it gives a cleaner look with everything being behind the tv.