i-Blason Unity Case Designed for iPhone 6s Plus, [Dual Layer] iPhone 6 Plus Case 5.5 Inch Cover [Ultra Slim] Armored Hybrid TPU Cover / Hard Outter Shell (Space Gray)

I think there are a lot of false reviews here, so I'll go ahead.First of all, it's a very nice looking case. I bought it without having used it and only saw pictures. The colors give nice options.As for durability, it's both good and bad. The rubber part is very strong and I think it will handle falls very nicely. The plastic piece, however, is just that, plastic. If put on or taken off wrong, there are definitely thin points that could break. Try to avoid taking it off and on too much, or do it very carefully. This would be a much nicer case if there was a different material here, but it would also be heavier, so there are some pros and cons.Some people said the plastic doesn't fit well onto the rubber. This may be true for some people, but I don't have a big problem with mine. It snaps on pretty well, though on the bottom there is a minor spot where it doesn't snap in as well as I'd like. Luckily, it doesn't affect the rest of the plastic's connectivity to the rubber and is not too noticeable. The lowest point of the large plastic (below the apple logo) where it meets the bottom rubber part, can be pushed in slightly indicating that that part does not really connect. I don't see a problem with this, however.Still, the rubber is the most important part of protection here. The plastic looks nice, but is not the primary protection. So it will work well.I see the price is 20 dollars now, I got it for 10 plus shipping for the silver color which was the cheapest option at the time. If you're looking for a stylish, decently durable case this is a good one. I'm not disappointed, and expect it to be as sturdy or sturdier than anything the Apple Store offers, and many of the ones other retailers offer.The raised rubber on the front of the case helps corners when they fall, and I think this is the best feature.

Pros:1. One of the best looking cases available. Best Color choices.2. Slim adds little bulk actually makes the phone feel better and hold better in your hand.3. Inside Black Shock Absorbent fits exceptionally well. Looks to add good protection won't vouch for how far the phone can be dropped from but pretty good for normal use. Bit this is also not an Otterbox and is a fraction of the cost.4. Has just the right amount of lip height around the screen for my Tech Armor Ballistic Glass screen protector.Only Con and a Big One:The plastic outer hard shell while it is one of the best looking out there and fits very well and tight on all areas of the phone except around the bottom ports. This is due to how thin the plastic is around those areas. In fact mine cracked at the lightening port in a couple days and that was just normal use no drops or anything. I ended up applying a small amount of super glue inconspicuously under the lip of the plastic all the way around the hard cover and placed it back on the black inner shell and let dry before placing back on phone. This seemed to work not sure how long it will last but OK for now. Probably will look for another case. I ordered two of these the one for my Wife was on back order but will probably apply a this layer of super glue on it before first use.Suggestion to the manufacture: I would have given this case 5 stars if the plastic outer shell was made of durable strong plastic or like strong material. Fix this issue and this will be a top notch inexpesive and good looking case.

Overall, I really like this case. I prefer something a bit less bulky than something like an Otterbox Defender and I generally am not a fan of screen protectors covering such a beautiful screen, so to me this strikes a nice balance of protection vs. bulk. It has a rubber glove on the phone with a plastic case covering the back of the rubber case to give it a bit more protection. It also has a bit of a lip around the face of the phone so that you can lay it face down without the screen touching the surface it's laying on. The only reasons not to give this product 5 stars are minor quibbles. First, the lip around the face should be a little more raised. It's good, but not great. Second, the case is a bit hard to take off. You have to run your fingers under the plastic piece from one end to the other and you almost feel like you're going to break it before it pops off. Only then can you remove the rubber encasing.Those minor issues aside, I like this case and you can't be the price. Out of the 4 I've purchased, this one looks like it is going to be the one that I go with.

"Iphone 6 Plus Case [Heavy Duty] i-Blason Unity **Dual Layer**...I wasn't sure what to expect here. When I first pulled it out I was kind of disappointed. It was rather boring looking (I got black, not a bright red or anything).Slipped right onto the 6 plus without issue, and I'll tell you what. The fit is perfect, the button responsiveness is great (I changed from another case that they were horrrrrrible on), it looks pretty sharp on the phone. I am quite happy with it actually. Cutout for the vibrate switch is nice and big so its easy to get to. Cutouts on the bottom will allow for basically whatever you want to use.I expected it to be a bit more rigid than it is, but I am not dissatisfied. My last case was quite rigid and very hard to get on and off. Last thing I want to do is bend my phone trying to change the case.The feel in the hand is good, nice and grippy. I deliberated at great length about which "heavier" case to get, I am quite happy with this selection.

Very nice case, I'm very happy with it.

Best phone case I have had in a long time. Couldn't ask for more.

I was pleasantly surprised upon receiving this case. I ordered one in silver and one in white. My initial impression is the build quality is high for the price of this case. I have definitely paid way more for way less.The TPU inner liner feels sturdy enough after a couple weeks that it will not soften up like some of cases may. The phone is definitely snug inside the case with only a little extra effort required to engage the volume/sleep buttons. The button push provides enough positive feedback to know that you're engaging them when pressing. The recess notch for the vibration switch provides ample room to put your finger tip in to activate.The plastic outer shell holds tight tot the TPU inner well, though the fit of the plastic frame leaves a little wiggle room around the lightning connector area of the phone. A small groove and clip system like on the sides would alleviate this. The plastic shell may not stand up to to many drops along the top and bottom edges, but I haven't dropped my phone to know as of yet. It should be noted that the plastic shell can be slippery too, but not much more slick than the iPhone 6 Plus without a case. This may pose a problem for those with smaller hands.The case does add weight and thickness to the phone, but you have to expect that with the level of protection provided with the case.I would definitely purchase from i-Blason again.

Great case. The plastic is a little thin in places which makes getting the case on and off a bit of an acquired knack. The trick is to put it on in one piece and not to separate the two parts. It can be done quite easily and the risk of breaking the outer shell is minimised.

Good solid enough case, dropped my iPhone 6 Plus once while in the case and no damage at allCase is a bit slippery and have found it suppresses the phone signal a little bit but nothing too badPhone is obviously a bit chunkier in it but can't get away from that if you want protection for it