iRobot HEPA Filters Side Brushes 15 Pcs Replacement Kit for Roomba Accessories 800&900 Series 980 960 961 860 870 871 880 894 861 864 870 with Tangle-Free Debris Extractor
Description
- The iRobot accessories is compatible with Roomba 800 900 Series 860 870 871 894 860 861 864 880 870 980 960 961 964 Vacuum Cleaning Robots.
- High-Strength and environmental protection material HEPA filters, filter small dust and bacteria, pollen,cigarette ash,reduce the secondary pollution of the air, bring fresh and refreshing breath of new feeling while relieving allergy symptoms about breathing.
- Professional iRobot Roomba Tangle-free debris extractor, discard traditional roller brush design, dual counter-rotating extractors incorporate a durable rubber tread design that grabs and breaks down dirt and debris from any floor type,cut off the hair, say goodbye to winding.
- To keep your iRobot Roomba operating at peak performance, filters, debris extractors and side brushes should be replaced every 4 - 12 months. about 4 months, the white HEPA filter turned gray, even can not be cleaned, because the dust particles have been deep in the fiber, can not be removed by vacuum, air filter effect is reduced obviously.so it is time to replaced with a new filter.
- iRobot Vacuum replacement parts-Include: HEPA filter*4 ,side brush*4,tangle-free debris extractor*1 pair,Free Filter Brush*1, Free Screws*4
If you don't regularly wash your filters, too much dust and rubbish will cut off the life of your vacuum . Will you spend more money on buying new Roomba vacuum ? Sedremm 15 pcs excellentquality accessories for iRobot Roomba Vacuum ,keep your iRobot new. ***How to clean the Extractors: 1. Pinch the yellow extractor frame release tabs, lift up the extractor frame and remove any obstructions. 2.Remove the extractors and remove the yellow extractor caps.Remove any hair or debris that has collected underneath the caps and around the metal axles. 3. Remove hair and debris from the square and hex plastic pegs on the other side of the extractors. ***How to clean the Side Brushes: To clean the side brush use the corner small screwdriver to remove the screws. then remove the brush,remove the hair or debris,and put the side brushes back in place. ***How to clean the Filters: 1.remove the bin by pressing the bin release button 2.open the bin door to empty the bin 3. now press and lift the filtered or release tab 4 .remove the filter by grasping the yellow tab 5.clean room was filter by tapping against your trash container 6.to reinstall the filter, press the metal filter lever,with the side of filter and push the filter down,the filter door will not close if the filter is not installed correctly ATTENTION ¡ïthe filter door will not close unless a filter is reinserted ¡ïif you notice roomba picking up less debris from your floor, emptythe bin,clean the filter and clean the extractors. ¡ïDo not attempt to run Roomba without the extractor caps.
Common Questions
Trustpilot
5 days ago
1 month ago
