Draytonby Schneider Electric Multi-Zone Smart Thermostat and 2 Smart Radiator Thermostat Kit - Combination Boilers Only - Heating Control

It is now th May 2024, so I thought it was time to update my review.My system has grown a bit it now includes 3 smart plugs/extenders and 17 TRVs, 1 Room Thermostat and one Wiser hub. My boiler has not changed, I am still using Wiser to control my old oil boiler.In short, the system is still working well and I am pleased I bought it back in 2018.I use it slightly differently now. I am retired and don't have it set up on timer. Most control is done using Alexa, I love the ability to control via voice, so it's easy to be laying in bed, feel I want a shower and to say "Alexa, turn on hot water" I also use phone to remotely turn on heat if heading home and it is a bit chilly.I was always good at turning off my old manual TRVs in rooms I was not using. But the App on my phone and voice control via Alexa makes temperature control so much easier.Haven't had to call support for years, I am just not having any issues.One bit of advice is to cost in buying a couple of smart plugs/extenders to get the signal to all bits of your house. I have a large house and ended up buying 3.So after 6 years all is good, any problems/developments and I will update my review again. My previous reviews are below.....I bought the Drayton Wiser Multizone Kit 2 – Heating & Hot Water back in October. Six weeks have gone by so thought a review may help others if they are considering purchasing.My system consisted of a oil fired boiler that heated radiators all fitted with traditional Danfoss TRVs and a hot water tank that the boiler heated in the airing cupboard. This was controlled by a Drayton LP522 programmer and a traditional wired room stat in the hall.Installation was easy. The Wiser hub fitted onto my existing programmer wall plate. I decided I didn't want to get an electrician to bridge out the wired room stat as instructed. As if I didn't like the system I planned to return it. So I set existing wired room stat to maximum so that was always calling for heat and Wiser then would control my heat.Downloaded App, pressed set up button on hub but my phone would not find the Wiser wi fi. It turned out I was pressing button too long, its a sort quick press. Then connected no problem. Added Drayton wireless room stat, 2 Wiser TRVs to two radiators in Living Room also fitted Drayton smartplug/range extender which is not part of kit but purchased separately.All worked well and I bought two additional TRVs. So what happens is this enables you to control temperature through App and Alexa.Things you can do with Alexa.Alexa What is temperature in Living Room?Alexa set bedroom to 20 degreesAlexa turn on hot waterAlso use it to operate the Smart/plug to turn on power to a lamp plugged into it in hallNot all my radiators are fitted with Wiser TRVs. What this means is if a Drayton TRV or the Room stat calls for heat an old manual TRV will operate at the temperature it is set at. So for example Living Room Wiser TRV calls for heat, boiler fires and radiator heats. Kitchen Radiator if old manual TRV open then that radiator also heats.After about 4 days I ran into a problem. Devices (TRVs, Room Stat, and TRVs) all disconnected. So not visible in App. Switching off power to hub for 2 minutes eanbled them to connect again. But eventually they lost connection againTo cut a long story short I spoke to Drayton Customer services, they were able while I was on the phone to download data from my hub and diagnosed a very poor signal. Apparently the Smart Plugs/Range extenders are better at pushing out signal that accepting it from hub. So I ended up moving position of initial Smart Plug I had purchased and buying an additional 2 Smart Plugs. First Plug is 6 metres from Wiser Hub, second plug 11 metres from first and third placed upstairs.Now everything seems to be working perfectly.Easy to set up schedules in App so each room with a Wiser TRV can be controlled individually. There is also an Away setting that enables you to set a schedule or temperatures for when you are not at home. I use this for a frost setting. Of course you can monitor the temperature in your house wherever you are as long as your phone has a signalI really like system and the control it gives me. Integration with Alexa is great and a real benefit.As other have said in a large house signal seems poor and resulted in me buying 3 Smart Plugs in total. So maybe worth planning for this in case you have to go this route too.I will update this review if I have more to add in the future.It is 30/10/20, two years since I bought my Wiser system so I thought it was about time for an update.I'm still pleased with my purchase.I now have a total of 10 TRVs and 3 smart plugs (needed to extend range).Two things I have noticed...1 When away from home heating is off. I often use Wiser to turn on the heating before getting home. Normally works well, but if there has been a power outage at home while away, even a really short one I cannot use the App to turn the system on remotely.2 Last night TRVs were constantly operating motors. They were not operating heating but had lost connection to the hub. Looking at app this morning, devices not connected. I was on the phone to Drayton Support, they downloaded data from the hub. A smart plug which I used as a range extender had disconnected. I had great, patient support from the two Drayton customer support people I spoke to. Was an hour on the phone but the problem was sorted.As I said earlier, I am still pleased with the Wiser system.Things I like and how I use it......Increasing temperature in the room I'm in without moving of sofa "Alexa make the living room 21 degrees"Working in the garden, feeling I need a shower. Open door, call out "Alexa, turn on hot water", carry on working while the water heats.Turning on heat/water while away so house heated for return (see note about power cut above)I will continue to update my review as time goes by, but in summary the system continues to impress!

I have the 2-channel system, running my hot water (tank type, not on demand) and single zone heating, although with the radiator thermostats you can make itMulti-zone without reinstalling your entire heating system! Trigger to install was my existing, rather old, timer and wireless thermostat packing up and having shopped around for a while.While not as comprehensive a system as others, it is extremely simple to setup, particularly if you already have a Drayton timer unit - it's just a matter of swapping the existing timer for the hub (took me literally 2 minutes with a screwdriver) and then setting up the app and thermostat (a further 5 minutes following the relatively idiot proof guide) - I am far from an electrician - making it significantly cheaper to get up as you remove the £120+ installation. The most complicated bit was working out how the thermostat stand clipped into the unit. Added bonus of a system made in the UK. You can then scale the system with the smart TRVs which I intend to do over time to spread the cost and/or chase special offers. I've not had any issues with the app or connectivity that some people report, I understand the app has recently been significantly improved and my house (fairly standard sized 1900s 3-bed semi) isn't really big enough to have problems that you might get with a larger house. I've not had it for long enough to measure cost savings but given that my old system was going haywire before I replaced it I probably won't be able to measure it - key thing is being able to control the heating far better.Negatives - doesn't integrate with wider ecosystems (apple home / nest / hive etc) so that has to be traded off against the simplicity. Alexia does work but I mostly just use the app. App can take 30 seconds to load sometimes but that's not really been a problem.