First Alert Hardwire Combination Smoke & Carbon Monoxide Alarm

I have been a master electrician for 32+ years. If you're not 100% sure of what you're doing, hire a professional! Ok a lot of people are complaining about the new connector. It literally takes 60 seconds to rewire. I rewire anyways so I can put a meter on the ceiling wires to make sure everything is as it should be. The base is a tad smaller than my previous ones. They were from a different company though. It presented zero issues during the installation. I have 3 detectors upstairs and one in the basement. I wired them all and they all worked inline perfectly. When one goes off, they all go off. The alarm is very loud and high pitched. It also tests both the smoke and CO² detectors when pushing the test button. You'll get a beep and then another beep. Then it repeats. Meaning they are all working. Bonus each detector comes with a pre installed Duracell 9 volt battery. You also receive a dust cover for the detector if you need to work in that room. Kicking up dust or debris can get inside the unit and fault it. Nice little freebie to have. Although I didn't need, they come with very detailed instructions with diagrams. After I installed them all I tested it my way using certain techniques to get both detectors to alert. They passed on both smoke and CO². For this price point, I am very happy with these units. It gives me a sense of security knowing my family is protected. Please mark the back of your detectors with the date you install them. I use a black marker. Also be sure you were shipped the correct units. It should say on the outside label Combination Smoke/Carbon Monoxide Alarm. I've posted pictures along with a video. I hope this aids with your decision whether these are for your home or not. I will update again if I have any issues in the future. As of now they are working as they should and I again, am very happy with my purchase.

We recently installed the First Alert Combination Smoke & Carbon Monoxide Alarm, Interconnect Hardwire Detector, and we are extremely pleased with the decision. This unit is an outstanding choice for anyone looking to upgrade their home safety system, combining two essential protections into one convenient device. Top Features We Appreciated Dual Protection for Ultimate Peace of Mind: The biggest win here is having both smoke and carbon monoxide (CO) monitoring in a single unit. It gives great peace of mind knowing that the home is covered for two of the most critical household threats. It simplifies maintenance and ensures comprehensive safety. Seamless System Integration: A major selling point for us was its compatibility with our existing setup. This First Alert detector fit perfectly into our previous interconnected system (hardwired). The installation was straightforward, and it immediately linked up with the other alarms in the house, ensuring that if one goes off, they all do. This interconnectivity is vital for alerting everyone, no matter where they are in the house. Reliable Brand: First Alert is a name synonymous with home safety, and the quality of the unit feels robust and reliable. Conclusion If you are looking to replace old, separate smoke and CO alarms, or if you simply need to upgrade to a hardwired, interconnected system, this combination alarm is a superb choice. It delivers on its promise of simplifying safety while maximizing protection. Highly recommended!

Fortunately, I hope I never have to rely on these in an emergency, but it's reassuring to have them installed. First Alert has a long-standing reputation for reliability, and these detectors were easy to install and integrate into my existing system. The combination smoke and carbon monoxide protection provides added peace of mind for my home and family. A purchase you hope you never need, but one you're glad to have

It's great having both of these in one unit, and getting rid of wall-outlet-hogging monoxide detectors separately. These click right into most modern homes with hardwired detectors and are good to go. The only frustration (and this is just MADDENINGLY STUPID) - these First Alert alarms all come with bezels that seem scientifically engineered to be smaller than the one you're replacing. The screws line up great, everything else is plug and play, but EVERY installation means you'll have a 1/16 to 1/4 inch gap showing your old ceiling paint. WHY?!?!? Like replacing a ceiling fan beauty ring, these should all be made the EXACT diameter as all the old ones we're replacing by the thousands, if not a bit larger. There would be zero downside, and zero frustration. First Alert, most of us don't have touch-up paint, and your old brackets also don't fit the new alarms. It's killing me that this isn't a more voiced customer complaint, it's fractions of an inch of plastic. It's literally the only "thing" to deal with when replacing these. First Alert, PLEASE expand the outer diameter of this bezel where it meets the ceiling by a 1/4 inch?

We have bought these several times and they work great with our existing system

One of the detectors in my house started chirping three times in succession indicating a failed unit. I replaced it with this one that was at a reduced price. The box was a bit mangled but the unit was like new and came with a lithium battery to boot. Quite the bargain, which was the good news I needed that day. I installed it and it works perfectly.

These are definitely worth a little extra money if you cook a lot. We do cook a lot, and that means our house ends up smokey fairly often. We were often dealing with false alarms which are not just annoying for us but terrify our dogs. We changed out to these smart alarms a few months ago, and haven't had a single false alarm since due to cooking smoke. I don't understand the science behind how it differentiates, but I'm impressed and our dogs are relieved.

This is the model recommended at the First Alert web site as a direct replacement for the First Alert model SC9120B. As others have mentioned, this one doesn't fit the mounting bracket for the SC9120B, so you'll have to remove the previous bracket and install the one that comes with this unit. For me, this wasn't a big deal and only required loosening two screws. The power connector is the same, so no electrical wiring changes are needed. I'm only giving four stars because they say it will last 10 years, but my home was built less than 14 years ago and I'm already starting to replace some for the second time, after they failed with the MALFUNCTION or END OF LIFE signal after only 6-8 years.