Echo Corner 185mm x 60T x 20mm Bore Circular Saw Blade, Fine Finish Fine Cut Wood MDF Plastic Laminate, Non-stick Coating, Compatible with 185x20 Evolution Bosch Makita

I made 20 or so cuts using this blade to adjust the length of solid oak floating shelves with 30mm thickness and 210mm depth. All cuts were clean and had crisp edges; there were no blowouts. The first test cut using this blade in a softwood beam looked equally good. No sanding to the edges was needed.These shelves are made of composite solid oak (30x30mm planks glued together). By the end of the job there was a minor build-up of glue visible on the teeth of the blade. This did not affect quality of the cuts and can likely be removed with a solvent. Other than that, there was no visible wear to the blade. All teeth remained sharp and chip-free.It's difficult to gauge the longevity of this blade from my experience so far, but it can definitely be recommended at least for small-ish jobs.

The media could not be loaded.  I mounted this on a Makita 36v compound mitre saw. The original was 190mmin diameter, this one is 185mm. Cross cuts are still completed as expected, the 2.5mm less radius isn't making much difference. The 20mm centre hole is spot on size, I couldn't detect any vibration while running. It comes with a 16mm spacer if that is the centre size you need. This is a narrow blade with a 1.6mm kerf, for comparison the 24 tooth blade that came with this saw the kerf is 2mm.I've been using this blade to cut 21mm x 230mm recycled hardwood shelving It cuts very nicely, fast with no splintering or sticking, straight and true with a fine finish. Can't ask for more than that really.I can't fault anything I've done with this blade. Obviously I can't say how long it will last, and that will depend very much on what it's used for. Based on my experience so far, I'd certainly recommend this blade.

This Echo Corner 185mm 60T Ultra-Thin Circular Saw Blade, 20mm bore 16mm washer, Fast Fine Cut Fine-Finish Crosscut Framing Wood Plywood MDF Plastic Veneer Lumber Laminate is great! Nice quality! Easy to use! Easy to install works perfectly good value for money

Works well without vibration, fits any standard 190 mm blade tool. I like that it has a coating on it so it doesn't get gummed up, and it makes nice smooth cuts. Seems good for the price!

Used on my track saw and wouldn’t even cut through plywood without jamming and loads of smoke as it was burning 🔥

A decent circular saw blade that's well made and appears to be quite robust and durableIt fits as you would expect and cut reasonably wellThe price is reasonable and it's worth trying

I got this for my husband to try with his Makita saw. Neither of us have heard of or used this brand before, but it’s always worth a try.My husband says it’s a fair price to have a spare blade.So far it’s only had a couple of test cuts on a few of different types of wood and it crosscuts just fine with a smooth cut.We have a sizeable DIY job coming up soon so it’ll get put through it’s paces then!

A great replacement blade for the price, My old blade for my evolution mitre saw was coming to its end of days. The fine blades work well and leave a neat and clean out for wood work and laminate flooringWould recommend