TONOR UHF Wireless Microphone System, 2 Sets Bodypack & Lavalier Mic | UHF Headset Lapel Mic, Rechargeable Receiver, 15 Channels 60 m/200ft Range 1/4" Output for Teaching, Recording ,Tour Guide

The Tonor TW842 is an excellent wireless mic set! I was surprised at how good it is for the price. I have used more expensive wireless mics from more well-known "professional" brands and these sounded just as good or better, and this set was easier to use; just turn on the mics and the receiver, and they sync properly and work right away. Here are the features that were most important to me: - No signal interference. - Switchable frequencies if interference is encountered. - Battery life indicator. Without it, the only indication is a dead mic. - Build quality, designed to not break easily. - Use multiple units. - Mixed audio output to capture all 4 mics with a single (1/4" or 6.35mm) input. - Simple to use for presenters and performers. - Individual audio output to send each mic (XLR) separately to a mixer to adjust or mute on the fly. This wireless mic set is just right for my purpose. I use two units in a church with two meetings running simultaneously. Each receiver has two handheld mics and two body packs (model TW842). The body packs with a headset or lavalier mic are used by a presenter, or multiple presenters, who hand them off to the next one. The two handheld mics are passed around the audience for comments. I walked around the rooms where they will be used to check for interference. The large main room is notorious for interference in the very common 500 MHz frequency band . That was a problem on a unit from a different manufacturer, which I returned to try this one. This one transmits between 900 and 930 MHz and there was no interference at all even with a room full of people with mobile devices, several WiFi repeaters nearby, and a transmitter for hearing-impaired receivers. The range was astonishing. I walked down hallways, into other rooms, and still was able to transmit without dropouts. The long range was a bit of a problem when I initially tried to set up two units on opposite sides of the building. When they're delivered, the mics sync to any receiver, so when I was testing the mics on the second unit, people in the first room could hear my voice. I had to shut it down and figure out how to change channels. That was a little tricky because there's no documentation about that in the box. More on that, and instructions, below. The build quality of the handheld mics is excellent. The metal handheld mics are nicely finished and feel robust, like they're going to last for a long time. The threaded housing for the battery compartment twists on and off very easily and precisely. Another unit I had tried before had plastic handheld mics and the threads on the battery housing were sticky and would have been easy to accidentally cross-thread. The body packs are plastic, but they feel sturdy. Battery life indicators are essential to help me decide if I can keep using a set of batteries for a meeting or if I should replace them so they don't die during the meeting. I haven't tested the battery life, but they have lasted through several meetings so far without needing to be replaced. Two potential improvements I suggest: improved documentation, and body pack antennas that can be replaced. The body pack antennas are small and delicate, as they are on body packs from any manufacturer, but they are not removable and replaceable like some, more expensive, units. When people are adjusting the body pack volume, moving around, putting them on, or taking them off, they can be damaged and that's the end of the body pack. This hasn't happened yet, but it would be nice to be able to replace the antenna without having to replace the entire body pack. The Tonor TW842 is a new product and I'm not even sure if I can replace an entire body pack, or if I have to buy a whole new set. Hopefully I won't need to. One presenter accidentally dropped a body pack because it was just stuffed in a pocket rather than secured with the clip on the back. Luckily it survived. Tell your presenters to use the clips or don't use the body pack at all. The clips will hold the body packs securely if they are used properly. I bought some belts designed to hold body packs for fitness instructors so women in dresses won't have trouble finding a place to put the body pack. They just put the belt around their waist with the body pack secured to it. The documentation is very basic. There were simple instructions to change frequencies using the HI/LO button in the battery compartment of the handheld mics, and the SET button on the body packs, but there was no explanation to set and keep the frequencies when using more than one set. After some trial and error, this is what I learned: The units seem to come from the factory without being synced or paired to a specific receiver. That's great if you have only one receiver. Just turn it on, turn on your 4 mics, and everything works great. If you want to change frequencies (channels), just click the HI/LO button in the battery compartment of the handheld mics, or the SET button on the body packs. The frequency changes on the mic and also on the receiver. The receiver will also show a channel number. The mics only show the frequency. There are 10 frequencies and channels for each mic; a total of 40 for all 4 mics. The frequencies don't overlap so you can theoretically use up to 10 units simultaneously. The mics have a small label on them: A, B, C, and D. From left to right on the receiver, the first (A) uses channels 1-10, the next (B) uses channels 11-20, the next (C) uses channels 21-30, and the last (D) uses channels 31-40. If you turn on a second receiver, it syncs to the frequencies of the 4 mics that are already on, so now two receivers are picking up the 4 mics. If you turn on the other 4 mics for the second receiver, they will also sync to the same frequencies. If you change the frequency on the mics for the second receiver so they won't be picked up by the first receiver, the frequency on the first receiver also changes. The manual doesn't explain how to set up multiple receivers. There are instructions in the Troubleshooting section of the manual to re-sync the mics if they aren't connecting. It turns out that's the secret to setting the frequencies on the different receivers so they stay set and aren't changed by another set of mics when they're turned on. If you are only using one set of mics, you don't need to bother with this. If you add another set, though, you will have to re-sync or pair the mics on each receiver. This seems to lock the mic to the receiver. The procedure is: 1. Turn off the receiver. 2. Turn off all the mics. 3. Initiate pairing. For a handheld mic, hold the HI/LO button inside the battery compartment while you turn on the power. The display will blink to show it's ready to sync or pair to the receiver. For a body pack, turn on the mic and hold the SET button for a couple seconds until the display blinks. 4. Turn on the receiver. Wait a few seconds for it to be fully started. 5. Pair the mic. For a handheld mic, press the HI/LO button once and it will pair with the receiver. The display will stop blinking to show it has paired. For a body pack, press the SET button to pair it with the receiver. 6. Repeat the process for each mic, making sure to turn everything off except the mic you will pair. 7. At any time in this process you can press the HI/LO or SET button to select a different frequency/channel and the mic and the receiver will remember that value when the set is used next. For simplicity, I set my first receiver to channels 1, 11, 21, and 31, and I set my second receiver to channels, 2, 12, 22, and 32, but you can select any of the 40 channels, as long as they are different on each receiver. Tonor's support seems to very responsive. I had to contact them about a shipping error and they returned an email quickly and addressed my concern. I figured their customer support is located in a distant time zone from me and I was pleased with the quick response, within 24 hours. Despite the relatively minor concerns I raised, I highly recommend the Tonor TW842 microphone set. It's a quality unit for a great price.

This setup is AMAZING and sooooo simple and easy!! It works just as well as the higher priced lapel/over the ear mics. I bought this for our church and the sound is crystal clear. No feedback, no sound distortion, no nothing! If you're looking for an economical system like this...buy this one!!! Plug and play! You charge the receiver, plug it into the output on the sound board and turn it on. The transmitter uses 2 AA batteries that have lasted over 3 hours. My pastor loves it!! If I could give it 10 Stars I would! Highlly recommend!!!!!!

I DJ a couple weddings in a year (only for people I know) I am a 6 night a week Karaoke host full time. I have tried other budget priced lavaliers for ceremony of the 2.4ghz variety and they seem to work right on up till the ceremony starts, then they fail or cut in and out. This set worked perfectly. NIce that the set includes two packs, and headsets. The display is informative. glad that the body packs are batteries (not recharge) makes for immediate readyness. on the neck tie or about 2 button's down it picks up perfectly. I like eq out the low end. The RX i am familiar with from the Tonor handheld mics that I also use.no problems plugging this into my budget priced rockville portable line-array for the outdoor ceremony, music from an offline android phone via bluetooth. The only slight issue, that was rerally not a problem, is that when the rx is wire to the charging port, there was a faint thumping noise into the system, but when ceremony started I ran off the rx battery which was fully charged. Excellent system for the application I would not spend hundreds for a big name device to only use once a year. This is nicer than the ultra-cheap ones and sounds great.

Doesn't compare to my Shure units, however.... for a budget headset, this one's pretty decent. No noticeable lag. The receivers battery life is more than long enough for a full 4 hour show. Keep in mind that I DO use it predominantly for spoken word, not for singing. I use it to host Music Bingo at various local venues. The transmitter is Very intuitive to use, has a nice strong belt clip, and has a very convenient single push "mute" switch. I Love that the transmitter uses 2 AA batteries. And the receiver can charge while in use, so No dropouts. The headset is a little cheap but it Does perform it's intended function.

So far, I've used this half dozen times in a month. It works well everytime. The plug in receiver paired with totally two different amps withput my needing to do anything. I only have two negative comments but they are not enough to downgrade from 5 stars. One, the lapel mic does not have the sensitivity for voice pickup that a more expensive unit would have. Solution - Turn up the amp volume. Two, the plug-in receiver is charged using a mini USB plug that basically matches most Android cell phone chargers. Because the transmitter does not have that feature you must use AA batteries. So one needs to replace batteries when needed. There is a battery strength bar on the transmitter device. One minor annoyance. The transmitter has a very stiff metal clip designed for attaching to some part of your clothing.. like a belt. Once on, it is difficult to remove without tugging and pulling on the transmitter. It would have been much more convenient for it to have a cell phone or glass case type clip on. Good product for the cost.

My husband love this, he uses it every Sunday when he's preaching. We have older ladies in our church who are hard of hearing, so this helps so much. It's a great value for the price. Its been very durable. We haven't had any issues with it since we bought it and we've had it for a couple of years now. We don't have a large church so I'm not sure what the range is. The sound is great. It was easy to set up.

I recently purchased the TONOR UHF Wireless Microphone System, and I’ve been thoroughly impressed with its performance and reliability. Whether you’re using it for live singing, church services, public speaking, or parties, this set gets the job done without breaking the bank. Setup was a breeze. The bodypack transmitters paired quickly with the receiver, and I appreciated having both headset and lavalier (lapel) mics included. It gives you the flexibility to choose what works best for your setup. The sound quality is clear, with minimal background noise or interference, even in a room with multiple wireless devices. With 2×15 selectable UHF channels, I haven’t had any issues with dropouts or cross-talk. The 200ft range is real—I was able to move freely during a presentation without losing signal. Build quality is solid, especially for the price. The clips and cables are durable, and the headset mic fits comfortably. The system also worked perfectly with my PA speaker and mixer via the standard 1/4” and XLR output. Pros: • Clear, stable audio with no noticeable lag • Dual mic setup (headset + lavalier) • Strong 200ft range and 30 selectable channels • Easy to set up and use • Great for karaoke, events, or professional use Cons: • No included batteries (requires 4 AA) • Display screen is small and basic Final Thoughts: If you’re looking for a budget-friendly, reliable wireless mic system, the TONOR UHF kit is a winner. It’s perfect for a wide range of uses, from karaoke nights to church services or mobile DJ gigs. I would absolutely recommend it to anyone who needs flexibility, mobility, and quality sound at a great price.

NOT RELIABLE. I purchased multiple units, both have noisy channels and both are dropping connection at 100ft when they are rated for 295ft. I have had to re-bind them multiple times as well because they lose connection and never reconnect. Support will not return my emails. I have another Tonor TW-388 as well unit where the some of the packs themselves have failed and no sound is making it through; 3 of the 8 packs do not transmit sound anymore. I have done all of the troubleshooting I can do and they will not work. I will be returning these. They are not worth the money, DO NOT BUY. This is really bad timing, as I intended to use these for a show and these brand new units are completely giving out. I won't be purchasing or relying on Tonor products in the future.

Micrófonos que responden y no meten ruido. Tener hasta 20 canales hace que sea un sistema muy interesante. Tuve un problema con varias antenas y en 5 días me repusieron el equipo sin problemas. Un servicio post venta de 10, perfecto. Las baterías superan la duración anunciada y al sincronizar por 1ª vez ya quedan sincronizados y las siguientes veces se conectan al momento. La pantalla de el receptor es muy útil y confiable. En resumen, la relación calidad-precio insuperable; la calidad supera al precio. Enhorabuena por hacer un producto de calidad a un precio asequible. Gracias.

Très simple à mettre en œuvre ! Bonne qualité du son, avec une bonne portée suffisante pour une salle moyenne !

Produit conforme à la description Les micros à main semble solide Les micro cravate semble léger à voir dans le temps Récepteur déjà paramètre donc prêt à servir sorti de boîte

War super schnell geliefert, eingestöpselt und ging...

Die Anlage macht einen guten Eindruck. Alles funktionierte auf Anhieb. Anlage und Mikro eingeschaltet und die Verbindung wurde sofort hergestellt. Das war auch bei den anderen Mikros so. Die Anlage wurde dann bei einer Veranstaltung mit ca. 200 Personen in einem geschlossenen Raum getestet. Alles war sehr gut verständlich, kommt allerdings auch auf den Redner an. Ich kann die Anlage nur empfehlen.