This is top-quality 433,92MHz Clone Remote, which will clone your: Marantec Digital 302/304 Digital/Digital 313 Marantec Digital 321/Digital 323 Command 131/fixed code 433,92MHz remote controls. With this remote cloner you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with an easy programming video: www.youtube.com/watch?v=u5bkc1-kqdu. Or side-by-side programming video: https://www.youtube.com/watch?v=y2g9h9cixf4 follow these easy steps to program your remote; & # x2022; you need to erase the remote first: 1) press and hold button 1 and 2 together - Led will flash 3 times 2) Keep Holding button and release button 2 button 3 times, Led will start flashing Non-stop. (it means, that remote is erased) & # x2022; next you need to clone your original remote: 1) put both (original and clone) remotes into back to back position (II) "or" side-by-side. Make sure they have direct contact, touching each other. 2) press and hold 1 button on your original remote and 1 button on your clone remote. Keep Holding until LED will make: 2 blinks - 3 blinks- steady = successfully cloned, only after the light goes into steady. If for some reason the Clone does not go further then 2 blinks, it means the signal does not go through, please slide the remote control up and down slowly, until you get the point where it will go through. Note: You don't need an access to you control board or receiver. If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.amazon.fr/dp/b01msrpt7y. We are totally committed to 100% customer satisfaction.
Trustpilot
3 days ago
1 month ago