NexiGo PJ40 (Gen 3) Projector with WiFi and Bluetooth, D65 Calibrated, Native 1080P, 4K Supported, Projector for Outdoor Movies, 20W Speakers, Home Theater, Compatible w/TV Stick, iOS, Android

I had a decent, big name brand, bulb projector about six years ago and recently got interested in getting another one because of the new LED/LCD technology that's currently available. I watched a lot of reviews and decided this one looked like the best all around pick for me and I was correct. This thing is BRIGHT, like watchable in a fairly well lit room bright. Of course it's best in low light as any projector would be, but I can have lights on and even curtains open (blinds still shut) with almost no degradation in picture quality. I have it set up where it's about a 100" screen and the picture is crystal clear 1080p and I have no doubt it would look amazing all the way up to the possible 300" (which I can't wait to try when I can find a space big enough for it). I also just have the thing projecting on a flat white painted wall, no special screen or paint and it looks prefect, I can only imagine how good it would look on a purpose made screen. I originally hooked up the sound output through a bluetooth speaker, but there was a slight delay in the sound making it not line up with the picture. I disconnected the bluetooth and to my surprise the built in speakers actually sound great. I'm still going to try to run a hard line 3.5mm headphone cord to the speaker for booming sound when I want it, but I'm honestly very content with the unit itself. I have the thing mounted just a couple feet over my head and the fan noise at level 8 (stock setting) is basically zero, I don't even hear it when there's any audio playing. I haven't tried hooking up to a gaming system yet, but I'm fairly confident that it will preform well. I'll update this review if it's at all laggy once I do. I couldn't be happier with this purchase, for the price of a 50" television I have a 100"+ screen that absolutely rocks. Just a note, I do have mine set up where it requires no keystone correction which should give it the best chance of optimal performance. Be aware that it projects the picture evenly, equal up, down, and side to side, so you want to be as centered and straight on to your screen as possible. As you can probably gather I have nothing but good things to say about the PJ40, but I will be brutally honest and update this review if I encounter any issues in the future. 6 month update: I have typically used this projector for 2-3 hours each evening for the last six months and it's still as amazing as the day I got it. Every person that sees the image, size, and brightness of the screen is seriously impressed. I couldn't be happier with its performance. I still haven't even bothered getting a real screen or special paint for the wall because it looks perfect on my flat white wall. I think this projector is going to last, but even if it crapped out today, I have spent the equivalent of about $1.60 a day to own it at this point (around $300 to buy and owned for around 180 days), totally worth it already. There's no need to buy a more expensive projector for general home theater use.

NexiGo PJ20 Projector Review I purchased this NexiGo PJ20 projector while it was on sale on Amazon as I was wanting one to use the projector this spring, summer, and fall to view movies outside in my Gazebo. I also ordered a 120-inch portable projector movie screen to be used with the projector. It is too cold right now outside so I am testing the projector inside to make sure it will meet my expectations. I first noticed how light this projector is which will make it easy to move the projector outside when I plan on using it to watch movies outside. My first impression was how easy it was to setup right out of the box and I added my Wi-Fi information to connect the projector to my Wi-Fi network. I was also really impressed with the quality of the video and the quality of the Dolby Audio sound. It is a budget-friendly affordable projector that offers a lot of features for the price. It has a native 1080p resolution, 500 ANSI lumens of brightness, and supports wireless screen mirroring and casting for iOS, Android, and Windows devices. The picture quality of the NexiGo PJ20 is very good, especially for the price. The native 1080p resolution provides a sharp and clear image, and the 500 ANSI lumens of brightness is sufficient for most viewing environments. It includes keystone correction control and video sharpness tuning. The NexiGo PJ20 has built-in Dolby Audio speakers that provide a decent sound experience. You also can connect external speakers for a better sound experience which you can do as the PJ20 also supports Bluetooth 5.1, which allows you to connect external speakers or headphones wirelessly. One of the best features of the NexiGo PJ20 is its support for wireless screen mirroring and casting. This allows you to easily project the screen of your iOS, Android, or Windows device without the need for any cables or adapters. This is a great feature for watching movies or videos on your phone or tablet, or for giving presentations and then mirroring or casting them to the projector. The PJ20 has two HDMI input ports, two USB connections, an Audio/Video input, and an audio output for headphones. It supports 5G Wi-Fi and Bluetooth 5.1 as previously mentioned. I used an Amazon Firestick to watch movies and powered the Firestick from one of the USB connections which had enough power for the Firestick to work flawlessly. My wife's first impression when she saw the movie projected on the wall of my bedroom was WOW. She really like the picture quality and size. Next I tried to cast my iPad to the projector as sometimes I cast video to watch from my iPad or iPhone. You just need to have the device on the same Wi-Fi network as the projector. I was able to cast my iPad easily and watch a movie flawlessly. Next I ran a HDMI cable from my Dish Network receiver and was able to watch anything on the projector that I could watch on the Dish receiver. You can also connect an older DVD player using the AV input port with the included RCA to 3.5 mm adapter. It has two USB ports which can be used to connect your mobile phone or tablet to the projector using cables. It is also used to update the firmware of the projector by downloading the update and saving the update to a USB drive. Then inserting the USB drive into the projector and the selecting the update function from the system settings menu. The USB ports can also be used to power a firestick or other streaming sticks as I did when powering my Amazon Firestick. My verdict is the NexiGo PJ20 is a great budget-friendly projector that offers a lot of features for the price. It is perfect for watching movies, playing games, or giving presentations. If you are looking for a versatile projector that is easy to use and affordable, the NexiGo PJ20 is a great option. I can’t wait for spring to arrive to start watching movies outside in the evenings.

First, I am not what I would consider a “tech-person.” Things have to be very simple for me to try to figure out when it comes to technology. So, I was super thrilled at how easy it was to set up the PJ10 in terms of setting up the language, figuring out the focus, screen tilting, getting connected to the Wi-Fi, etc. The remote control is simple to use, but sometimes pushing the buttons wouldn’t always get me to the place I wanted to be. I found myself pushing the buttons multiple times in some instances to get to the screen or choice I wanted to get to. But to me, this is more of a minor annoyance than it is a major issue (I’m probably pushing buttons too fast, or off center, etc.) Also, the picture, color, clarity of the projection is stunningly magnificent, and the project is lightweight which is also a plus!! The only problems I had was really maneuvering through the menus to figure out how in the heck to get things (computer, iPhone) connected to mirror images. Some of the problem actually lied in the connected devices and trying to figure where to go what to do, etc. This had less to do with the projector itself. I’m pretty sure that if I just used connector cables like my HDMI cord, I would have got this thing up and running quite soon. But the draw for me to this project was the fact that I didn’t have to use any of these other connections to use it. I also couldn’t not figure out the Bluetooth function for the iPhone easily. I was able to figure out the iOS mirror screening from the iPhone but when I actually tried to mirror a movie from my iPhone to the projector, it would only do the sound from the projector, but not the actual picture itself. But again, I’m not sure that the problem is the projector, it’s probably me…LOL. Once I was able to figure out how to actually mirror and/or duplicate/extend my media from my computer to the projector, it became a whole lot of fun. The only thing is that you may have to connect a component audio source speaker because there is very little bass in the sound from the projector and the sound is a bit tin thin. However, there is very little fan noise coming from the machine which is ten times better than my old projector which made SOOO much noise and got so darn hot after a while, I had to shut the apparatus off. This is not the case with this projector. It hums quietly so as to not interfere with your viewing entertainment. Overall, I am satisfied with the projector, I just think I have to get a lot more practice in figuring out the Wi-Fi connection piece so I can continue using it without having to hook up any additional wires to it. Also, it does seem that I have to put in the Wi-Fi password each time I turn the machine back on and I’m wondering if there is a way that the Wi-Fi password stores itself into the projector, so I don’t have to spend time typing it back into the projector each time I use it. I give it an overall rating of 80%. It’s a pretty cool machine.

For the longest time, I wanted a projector that I could use outdoors and indoors fairly easily, with good graphics and projection capabilities, and at the same time keeping it as simple and wireless as possible. I was trying to find the best projector under $300. I mean, these things can go for a fortune sometimes and sometimes even a $300 projects better than a $1000 one. Anyways, after reading various descriptions and reviews on many projectors, specifically on Amazon. I came across Nexigo's PJ40 Projector. I had already purchase a couple of web cams from NexiGo in the past, which were amazing (but that's a different story). So I figured that I could confidently give this projector a try. So I ordered the NexiGo PJ40 (Gen 3) Projector and I was blown away. As soon as I opened it there was a QR code which instructed me on exactly what I needed to do. I pulled the projector out of the beautifully packaged box and began to set it up. Within 10 minutes I had YouTube playing on the projector. As a father of three, finding quality time to spend with my kids is a top priority. The NexiGo PJ40 (Gen 3) Projector has been a game-changer for us. We love watching baseball games and having movie nights together, and this projector has made those experiences even better. The picture quality is stunning, especially with the 1080P resolution and 4K support. Even the speakers on the projector are powerful enough to make our viewing experience great. But you also have the option of connecting your soundbar to give you that theater like experience, which is what I did. I even set up the projector outside at night because we love night swimming and watching movies at the same time. I've purchased several products from NexiGo before, and they've never disappointed. I gotta say that NexiGo's customer service is always available and extremely accommodating. They are quick to respond to any issues and help you with any troubleshooting needs. For this reason alone, its worth buying this projector and why I will continue to trust NexiGo for my tech needs. If you're looking for a screen projector for your family, to watch movies and games or for presentations which you can use both indoors and outdoors. That wont have you questioning the poor quality of what you see on the screen. Then I highly recommend the NexiGo PJ40. It’s been a fantastic addition to my home, and we use it all the time. Thanks NexiGo. Check out the screen projection in my photos. Even in the photos it looks amazing.

Recently, I purchased a projector for my basement theater. The NexiGo PJ40 LCD Protector seemed like an excellent option. My basement can be set for low light, with a twenty-by-twenty-foot area. Perfect for such a projector. I was pleased with how easy the setup was. From unboxing to running, took about 10 minutes. I should say I already had a screen and surround system ready. My projector is eleven feet from the wall screen to the projector. My screen is a 120-inch white panel. I chose to not mount it, rather have a stand about twenty inches off the ground. My connection is via HDMI to Amazon Cube then goes into a surround system. Now that a baseline has been established, let me go through the configuration process. After turning on the unit, the home screen was an excellent guide to configuring it to the current setup shown above. First, the unit needs to be focused. For this unit and pretty much all in this in price range, is a manual function. Second, was setting up the network. The unit comes with a hardwire network port to Wi-Fi. I chose Wi-Fi since I have a strong 1 gig internet. Always look for firmware updates, after connecting to the internet. Get any prospective bugs out. Next, you may notice the projected image is probably out of skew. Under the “Settings/Projection”, notice a selection called Auto Keystone. It attempts to adjust the skew based upon the height of the projector, in relationship to the screen height. For me, this did not entirely make the adjustment. No fear, the company programed a manual option. This was extremely helpful and was able to make a significant adjustment. As an observation, after manually setting the keystone values, I shut down and turned the unit back on. I wanted to make sure the values saved. As the machine booted up and ran diagnostics, the screen was askew: however, as soon as the until fully booted up, the screen adjustment was perfect. Then you will want to adjust the picture values. This allows you to select 16:9, or 4:3 as well as the type of movie mode you wish. For this setup, the surround system handles the sound. If all the sound comes from the unit itself, it has two 10Watt speakers, which are not bad at all. The unit can be connected to a PC, Miracast, IOS Cast, Files, Bluetooth, etc. All this can be performed wirelessly. There are many options, making this an excellent multipurpose projector. Conclusion: For the price range, this would be an excellent purchase. It is not every going to compete with high powered, expensive projectors, but for the price is packed with features. Everything appears to be designed around a projector for all purposes. The ability to adjust the screen image is appreciated. One tip for beginners to the projector arena, testing was performed watching analog moves up to 4k. Both had nice pictures. The drawback in not the fault of the projector, rather blowing up an analog movie. There just are not enough pixels in older movies. The older moved will sometime look a bit pixelated. I tried switch to 4:3 and helped, but did not go away. Perhaps some readers were not aware televisions were not as large as they are today. When you blow something up, just like a picture from a camera, it reaches a limit. Just keep that in mind. Makes an excellent holiday gift for friends and family. What are the basics? NexiGo PJ40 LCD Projector • Native 1080P with 700 ANSI Lumens • Native Resolution 1920 x 1080 • Max Supported Resolution 4096 x 2176 (Local video playback) o Via PC, thumb drive • Native 1080p (Supports 4K H.265 Decode) • Projection Size 50 - 300 in • Projector distance is 4.72 – 30.18ft • Speakers 10W x 2 • This uses LCD Imaging Technology, but employs LED light source • 3000:1 contrast ratio (Note: 3000:1 contrast ratio is good for dark rooms.) • lifespan of 30,000 hours

I don't have a lot of projector experience. I owned an Epson prior to this purchase. I wanted to get another projector for my bedroom, to watch TV & Movies in bed at night. I'm a huge fan of Nexigo's webcams so I wanted to try their projector. Unboxing the projector, you can immediately tell this projector is a high quality build and doesn't feel cheap like some of the others I've tried out in stores. It has a little weight to it, and feels very solid. I mounted a shelf on the wall next to my bed, specifically for the projector. I'm projecting onto the wall near the foot of my bed, approximately 12 feet away. That wall does not have a projector screen, or special projector paint on it. It's standard benjamin moore paint. However, the picture quality is exceptional. The epson I previously owned was also a 1080p projector, however, the quality from the Nexigo is even better. The built in speakers on this unit are also amazing. I used to have my previous setup with two Apple homepod Mini's to get enough sound. However, this Nexigo projector has very high quality build in speakers and I don't feel the need to add any additional sound sources. These speakers are definitely great for my needs, as they are plenty loud and good quality. To be honest, I've only found two very minor cons to this projector: 1) The power cord wasn't long enough. I believe it was 6 feet, but it wasn't long enough to reach the floor from the shelf I mounted it on. Not a big deal, I spent $10 and bought a longer one. 2) The internal fan is a little loud IF you place the projector on the brightest setting. However, I normally have the projector brightness set at 5 out of 10....and I can't hear it at all due to the HVAC/AC system. Overall I have to say I'm extremely impressed by this projector, especially for the price. I would highly recommend it, and will update my review with some photos.

This definitely feels and look like a more premium version of the PJ20. Pros: - I really liked the auto keystone correction. It's very useful and works properly. - The speakers are very good considering it's a projector speaker. - The image is very clear, and can achieve massive size of up to 300" (although I didn't test that size) - The lens cover and controller feel very premium, as opposed to the PJ20 Cons: - The main con and the reason I'm giving it a 3 stars is that when making the software update from RUIOS 5214.1.1.0 to RUIOS 5214.1.1.1 it got stuck for no apparent reason in 21% download. In general, most electronics are not supposed to be shut off in the middle of a software update, so I decided to just leave it there updating and see if it continued. After 4-5 hours, it hadn't move from 21%, so I decided to try to back out of the update. When I click back in, it continued from 21%, but it started loading again, then it got stuck on 33% again for no apparent reason. So, I went back out of the update, and back in, and it continued downloading more, but the same thing happened 5 times, so I had to back out and back into it 5 times to complete the update. By the time I was finally able to get the software update, it had spent so much time on the same screen, that the lens got burn in with the update screen, which was incredibly annoying when watching TV series or movies on it. It would've honestly been a 1 star if the burn in had remained, but after watching a few movies on it, the burn in is completely gone now. - In the default settings, the fan noise is quite noticeable, but it is something that can be easily changed in settings. - Before the software update, I was watching a movie and the projector was flickering a bit, with a black frame every now and then. I couldn't figure out why, but after the update I didn't see that again, so I imagine it was something that was fixed with the update. Overall: I'm pretty concerned with the software updates for this projector, and while other than that it is a ver good projector, I'm not sure if it justifies the price difference from the PJ20. It probably does if you need the 300" screen, or if you're really into the premium look/feel of it. Update, 14/09/2024: After speaking with Nexigo support, they gave me a local update file, which allow me to update the projector very easily. Having said that, having to contact support for a software update still seems too much of a hassle for something that should be very easy, which is why I am maintaining the score at 3. Their support team did mention that the very slow online software update was likely caused by the fact that I am in LATAM, and their servers for updates are in the US. I've bought several items from them in the past, so I do believe them, and if you are in the US, it's very likely that this won't be an issue for you at all, in which case I'd give this projector 5 stars. If you are in LATAM, then you may encounter the issue mentioned in the original post, and I believe that it merits 3 stars as it can damage the projector screen, or force you to contact support for an update, which seems excessive for a very simple software update.

!! Add to cart list !! 1. quality brand bluetooth soundbar/sub. 2. Sturdy tripod with shelf and security straps (This projector is large and heavy) 3. Roku express stick 4. Multi outlet power strip with long cord plus extension cord to place soundbar in front of and out of the way of the screen. 5. If you don't have a white wall like me....use a quality white bed sheet. Sams club has good ones....buy a king set. The screens they sell on here that are affordable above 150" absolutely suck. You'll come out better spending 60 bucks on a set on California king high thread count bedsheets...or just painting a wall. I mean... as far as bang for buck is concerned, this is about as good as it gets. The picture is very nice and im convinced on the manufacturer's claim of calibration. Fantastic contrast for this price range and I believe they are pretty honest about the ANSI lumen rating....the Video and images I included were taken at 5pm central time....its not very dark in this room and the video and pics don't do justice. The displayed image is about 175" diagonal. The projector is about 18ft from the wall. The wall is wood paneling that I painted satin white. Ideally, id rather sheet rock but i barely notice the grooves and wainscoting. The speakers....well...it has them. I spent about 90 dollars on a 2.1 Phillips bluetooth wireless soundbar and sub at Walmart and it absolutely became a necessity. The built in speakers do not have full enough sound to compliment the large screen. Do not buy this projector without a GOOD soundbar and sub....it has great sound output features and you owe it to yourself to get the most out of the experience. It has variable fan settings but in order to use maximum lumens, the fan needs to be on 10 at all times....which is fine because with a soundbar, you don't hear it at all. Buy the roku extended range express. Trust me....this projector converts 4k very well with the roku but you'll need a solid wifi signal as you can get. You'll have to manually focus the objective...but if you plan to mount this in a permanent location, you should only need to adjust it once. Ive had this for a while now and am Startong to notice slight yellowing on the edges of the screen...but its not terrible....and for the price and over all quality and performance, its acceptable. The included remote is decent....buy better batteries because the ones that come with it are cheap. Im giving it 4 stars...but I wouldn't pay much more than I did for the price I got it on sale for without expecting auto focus and better sounding speakers.

Excellent product. Pure joy to use it.

Il prodotto è ottimo ed ha un rapoorto qualità/prezzo fantastico. Arrivato in tempo ed integro.

RAPIDEZ,SERIEDADE E RESPEITO COM O CLIENTE. PARABENS A ESTA DUPLA PERFEITA,AMAZON E DHL POIS AS DUAS SABEM COMO FAZER O CLIENTE SUPER SATISFEITO. RECOMENDO COM CERTEZA ESTE PROJETOR MUITO BOM MESMO E DE ÓTIMA QUALIDADE.

The most famous affordable home cinema experince. PROS: -SHARP -LARGE -BRITH -GOOD COLORS -GOOD AND EASY MENU CONS: -NOT FOR GAMING: Even with gaming mode, it has a noticeable latency (like 1-2 seconds/1000ms+) dont game on this. Check on youtube, this stuff is good compared to its price. (VS expensive high-end projectors)

Rien ne fonctionne, ni le wifi,ni les ports usb, hdmi et flash drive. Contrairement à sa présentation il est incompatible avec android...pfft et en plus appareil qui a déjà été retourné par qqun d autre vu le paramétrage des réglages....