Brass Garden Hose Splitter, 3/4" 2 Way Tap Splitter,Hose Tap Splitter Connection with 2 Individual On/Off Valve and Extended Handle, Hose Pipe Tap Splitter can Mounting Two Timer

3rd hose splitter valve bought in 2 years! One froze & split. Another had valves TOO DIFFICULT TO OPEN & CLOSE! This unit works GREAT! Long knobs provide leverage and work EASILY! No leaks . Great value!

Will likely break; poor design. Exceptionally heavy brass casting is quality. But, it is all for naught as the threaded ring that is supposed to secure the splitter to the faucet will pop loose if is is bumped or if you attempt to tighten the ring enough to get a water tight seal. The ring is only held onto the splitter by a wire retaining ring which easilypops loose and cannot provide enough strength to hole the ring onto the splitter valve body.

Allows me to keep pool leveler on, and turn on the hose as needed. No leaks, easy to use and install. Heavy duty hardware.

This is a very expensive hose splitter that we bought only after years of trying other options. This splitter is indeed brass, and the wider spacing between spigots definitely helps with tightening and untightening. The plastic valve knobs are larger and easier to turn than the other brands we've tried. The valves seem to have a position where they sort of "snap" into position when being turned off. This was installed downstream of a watering timer, and everything is working very well with no drips at all, which is remarkable.Because this is relatively expensive, it better not leak. If it does, I will definitely update this review.

The main connector to hook up to water line just uses a light c ring to hold it together. It's easy to over tighten even by hand and the whole assembly comes flying apart.That said, I'd you don't over tighten, it does not leak at all. But if it were to get bumped, it may easily break apart. Not in a way you can't reassemble, but if you aren't there to see it happen, you could have a mess if the water is left on...Outside of this one design flaw, the unit is high quality, does not leak, and the valve action feels really nice opening and closing.

I thought this was going to be a reasonable purchase based on other reviews. However, when I tightened the female fitting onto the hose bib for the first time, the fitting came off the splitter... and it wasn't even tight. I put the thing together and tried again and seem to have some success and then it started leaking and I tightened it a bit more and it fell apart again. The output valves were solid but who cares if the thing comes apart?Maybe I got a defective unit but the design seems weak so I returned it and will NOT be using this cheap brand, or design, again.

We have gone through several other company's hose splitters. However, this is quality and will outlast us, I think. I like the bigger on/off switches as well, making it a little easier to turn on and off the different splitters. Keep in mind if you need a three-way splitter get a four-way not to outgrow the product. Also get different color hoses, so you can remember which one goes where.

It those a great job and is durable thus far.

Fell apart while installing it….No CommentMy mistake for buying such low quality product