This is top-quality remote, which will clone your CAME 433,92MHz remote controls. With this remote cloner you can clone all 433.92MHz fixed code keyfobs. If your remote uses the 433.92MHZ frequency and is using a fixed code it will work with this remote duplicator (note: rolling code remotes will not work!!!) > How to clone your remote, with an easy programming video: < • https://www.youtube.com/watch?v=U5bkC1-KqdU > Follow these easy steps to program your remote < • You need to erase the remote first : 1)Click and Hold Lock and Unlock buttons together - Led will flash 3 times 2)Keep holding lock button and release unlock button ( keep holding Lock button since step 1 ) 3)Push unlock button 3 times, Led will start Flashing Non-Stop. ( Keep holding lock button since step 1 ) • Next you need to clone your original remote : 1)Put both remotes Into back to Back position ( II ). Make sure they have direct contact , touching, push a bit to make them touch each other harder. 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make : 2 blinks > 3 blinks > Steady = Successfully cloned, only after the light goes into steady. • If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down, very slowly until you get the point where it will go through. > • Note: you don't need an access to you control board or receiver!!! > WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION !!! We can guarantee that, if you experience ANY problems we will endeavour to resolve them as a matter of urgency, so please get in touch with us before leaving us any feedback <
Trustpilot
1 week ago
1 day ago