SUNPIE Door Storage Hanger Rack for Jeep Wrangler & Gladiator

Very easy to put together. The directions font and pictures were a bit small so it took a bit longer to figure out than expected, with some study of the pictures it went together fine. Works as advertised holding all 4 doors and rolls smoothly. Cover fits just fine. Seems to be sturdy enough and the price was right!

Very useful. Pretty straightforward installation instructions. Solid and high quality. Very important in order to keep your doors clean and safe. Should have bought it a long time ago!

Have yet to actually place doors on this, but so far pretty pleased with it. Seems solidly built and was surprised to find a full blown wrench included as opposed to the cheap stamped wrenches so often found in self assembly items. Only real complaint is one of the castor wheels does not spin freely. Likely bad bearings. Will update if I have any complaints once I actually mount my doors. UPDATE: This rack is pretty awesome. I did get some door bags to further protect my doors and my doors are safe and secure in this thing. Having the wheels makes moving it around super easy. Must have in my opinion if you go doorless and don't have wall space to hang doors.

Likes: 1) All parts were included 2) Casters are handy for rolling 3) Doors fit perfectly 4) Cover is nice and fit doors perfectly Could improve: 1) Assembly required. Supplied tools are lightweight 2) Entire construction is lightweight.

Build very good . Door mount is great. Holds doors very secure and safe. I would highly recommend it.

I like it. It's not high build quality, but it would have cost me much more to buy the steel to build it myself, not even including the labor time and cost of fasteners. I agree with others who say the instructions could be better, but look closely at the pics in the instructions and you'll have few problems. Get yourself a 3/16 Allen socket to make life easier. It comes with a 13mm wrench which I almost threw away, but don't. I'll explain later. REMEMBER, it's the shape (square) of the tubing that gives the rack it's strength. DO NOT OVERTIGHTEN the fasteners. If you take the tubing out of square then it's weaker. The fasteners don't support the load so just make them snug. DO NOT USE AN IMPACT. THINGS NOT IN THE INSTRUCTIONS: The 3M rubber pads go on the L and U-shaped brackets because the painted side of your door will contact those flat surfaces and scratch your paint if you don't use the pads. The flat washers go on the bolt for the casters so they are between the caster and the frame. The lock washers go on the bolt for the caster AFTER you put it through the frame so it's between the frame and the Acorn nut. When you try to tighten the casters you'll find that a wrench won't fit between the frame and the caster to hold the nut so it just spins when you try to tighten the Acorn nut. BUT! You saved the crappy wrench they sent with it. Take that over to your bench grinder and make it thin enough to fit. Don't have a bench grinder? That's okay, you can tighten the casters with needle nose pliers. You don't want to overtighten them anyway. CONS: Poor quality control. I set the driver's door in and it went perfectly. I set the pass door in and it scratched the paint on the door hinge because the lower bracket on the dolly was welded slightly crooked. Our Jeeps are used as Jeeps so not a big deal but annoying. It's very low to the ground so you need a strong back or a buddy to help you set the front doors in the rack. OVERALL: I like it a lot. Casters roll easily AND they are all locking casters. It holds the door safely and I love the cover. I was able to tuck all four doors away in a corner all covered up.

I didn't have the highest hopes for this door holder however it so far has proven pretty handy. It didn't initially seem able to hold the weight of the standard doors as it seems a bit light for that duty. However it so far is working fine plus I really love the cover that comes with it.

If you’re a Jeep Wrangler owner, you already know the thrill of going doorless on the trail or in warm weather. But where do you safely store those heavy, awkward doors once they're off? That’s where this Jeep Door Holder Rack becomes an absolute game-changer. Why It’s Worth It: Rock-Solid Stability: The steel construction is solid and sturdy, with no wobble. I didn’t worry for a second about my doors tipping or getting scratched once mounted. Perfect Fit: Designed specifically for Jeep Wrangler (fits both 2-door and 4-door models), the alignment is spot-on. Doors slide on smoothly and stay secure. Space-Saving Design: Keeps the doors upright and off the ground, which is crucial if you’re tight on garage or shop space. Scratch Protection: Most models come with rubber or foam padding at all contact points. No metal-on-metal contact means your paint job stays pristine. Easy Assembly: Took me under 20 minutes to put together with basic tools. Very straightforward, even if you're not particularly handy. Bonus Points: This model includes casters so you can roll the rack around the garage—super convenient if you're reorganizing or storing during the off-season. Whether you're an off-road enthusiast or just love cruising doorless in summer, a Jeep Wrangler Door Holder is a must-have. It protects your investment, saves space, and makes the door removal process way less stressful. Once you use one, you’ll never go back to leaning your doors against the wall again.