ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE) 6Gbps Dual NGFF MSATA B Key/ B&M Key SSD to 2.5" III Converter Adapter Max 4TB Support 2230 2242 2260 2280 SSDs

Works perfectly for M.2 SATA (not NVMe) — simple, sturdy adapter. Fits 2230/2242/2260/2280 B or B+M key SSDs, installs easily, and shows up as a regular 2.5" SATA drive. Got full SATA III speeds in my tests. Good build, affordable, great for reusing spare M.2 SATA modules. Simple and reliable.

Cheapest working solution for me. I purchased 2 adapters for the four sata nvme I had. This setup gives me access to 1tb of storage with another 1tb on a switch. Transfer speeds are to be expected of the storage interface and the USB protocol. It cost me roughly 15 dollars to utilize 2tb of storage I had laying about, YMMV.

Described as being able to use 2 drives at the same time, or do an automatic JBOD, it only allows you to use 1 at a time with a switch, and it does not come with the case

This is a nice little board however, there is not much information about it's operation. After receiving, I can tell you that it does not have any side mounting holes, so you would have to mount to a drive kit. Also, there is a little switch at the top, that switches between the NVME's installed. You do not see both NVME's at the same time. It would be good to use as a flash drive if it was a USB interface instead of a SATA interface.

Excelente producto cumple con lo descrito

It works as advertised, you can only access one drive at a time via the switch.

The good. It works just fine...mostly. I did have one issue with a SATA cable, but I swapped out the SATA cable and it was detected. The SATA cable that didn't work had a retention clip - unsure if this caused the issue, or if the cable is bad. Just something to keep in mind if you hit this issue. So, inexpensive and works with SATA M.2 drives (which I mistakenly bought as I wanted very small drives for a project and didn't pay attention to SATA vs NVMe). The bad. 1. In multiple places in the listing, it states: "Aluminum alloy housing". It's not. It is plastic. 2. The "Precautions" bullet in the item summary states "two SSDs must be connected for simultaneous use, SSDs will be re-initialized upon first use, please back up your hard drive data before use, when using, two When in use, a JBOD is formed between the two hard disks." However, this is not the case. As other bullets and reviews state, you can only access one drive at a time, requiring entry into the case to flip the switch. This didn't affect my use, but can be confusing for other customers. So, one star off for each of the misleading description items. Mine came with all of the screws and standoffs (I saw another reviewer was missing theirs). So, all is good there. If I needed, I'd buy again for an internally mounted drive. If wanting an external drive, I'd probably look elsewhere for an actual aluminum case.

Great adapter, plug and play. Easy to install and use and a great value.