Protect Your Tech in Style! 🛡️
The HP 1012 G2 Protective Case is a hard-shell, lightweight case designed specifically for the HP Elite x2 1012 G2 tablet. Weighing just 317 g, it offers heavy-duty protection without compromising on style, featuring a sleek black and silver design. With precise dimensions of 14.33 x 0.24 x 12.91 inches, it ensures a perfect fit while allowing easy access to all device functionalities.
Standing screen display size | 12 Inches |
Brand | HP |
Series | Etui De Protection X2 1012 G2 |
Item model number | 1HM07AA |
Item Weight | 11.2 ounces |
Product Dimensions | 14.33 x 0.24 x 12.91 inches |
Item Dimensions LxWxH | 14.33 x 0.24 x 12.91 inches |
Color | Black |
Department | girls |
Manufacturer | HP Inc. |
ASIN | B075355F6R |
Is Discontinued By Manufacturer | No |
Date First Available | August 23, 2017 |
J**R
good quality, necessary for the tablet
as the tablet has a tendency to stand unstable, it will easily fall. It's sturdy, but still. And this case protects it very well, and isn't in the way. As I bought it for a G1, the charging port USB-C is not open, so had to drill a hole and widen it to allow for the charger to connect. But that was to be expected, and there's no case for the G1 available.
W**.
Love this. Fits the x2 perfectly.
This fits the x2 perfectly. The protection and flexibility this beautiful machine deserves. Be careful to attach the shoulder straps properly. They are designed to hold on securely but I did not attach them properly and the thing fell off my hip. Good news is there was no damage except some scratches on the corner of the case. I can't imagine what the result would have been sans case. Get this! Plus it is flexible, tailor made for the x2 and stylishly executed. Finally, it cost less than a good phone case.
O**O
Superhero of a Case!!
Fits my HP Elite X2 perfectly! Slot for the pen on the back. Strap on back is perfect for using just as a tablet. It adds a nice layer of protection and is well made!
J**Z
Will Fit Elite x2 1012 G1 With Modification
First, the photo is wrong. The case you will receive is in the photos I uploaded. This is the correct case for the G2 (T3P15AA), but when I saw the photo pictured same case as the G1 I thought it would fit the G1. It does fit the G1 perfectly with one exception. The cutout for the USB Type C port, used for charging the tablet, is in the wrong location. I was able to modify the case by cutting a hole in the case where the port on the G1 is. The problem is because the G1's power supply has a right angle connector, which is great so you don't break it off if the tablet falls, so you have to cut an elongated hole. The size of the hole weakens the right side protection, not to the point that the tablet will fall out of the case, but only to the point that you can't hold the tablet by the right edge of the case.However, I love this case. It is much thicker than the case pictured, which is designed for the G1. The rotating hand strap is ingenious. On the G1, you only have two options, neither of which is really comfortable when trying to hold the tablet seated. I end up holding the stand more than using the hand strap. The G2 case is much better made than the G1 case. Whereas the G1 case is slippery hard plastic with a leather finish vinyl piece glued onto the rear, the G2 case is much thicker with higher rubber coated bumpers around the entire frame. The G1 case is better design in that instead of sliding the tablet in from the bottom, the frame securely snaps onto the back piece, making it almost impossible for the bottom of the frame to move away from the tablet in a drop and damaging the tablet. Another minor annoyance on the G1 case is that the connecting "ears" for shoulder strap protrude almost an inch, making it uncomfortable to handle the table by the upper corners.
C**M
Love it, but I had to modify it to get access to the ports.
The case works great, is very protective, easy to install, and meets my needs. However, the ports on the right side get covered up. The thick rubber part can be cut away with some sharp scissors or snips. But the thicker part with the plastic also has some metal in there and that required a hacksaw.I rated the features 5 stars. but overall only 3 because of the ports being covered even though the description says my HP device was compatible. I mean it is compatible, just not 100% functional to my device.
S**Z
Great case
This case is great for with HP. Very sturdy construction and comfortable design. Start is very easy to remove.
D**N
Can do better
Tablet does not fit appropriately and needed to be altered to accommodate the use of a keyboard. Some of the buttons do not match up with the buttons on the tablet.
J**.
Dosnt fit
This dosnt fit and the vender said it would!
Trustpilot
1 month ago
1 month ago