Phanteks Eclipse P300 Tempered Glass Midi Tower Noir, Rouge

Fantastic little case. Wanted a compact case with lots of dust filters to replace my dinosaur of a phantom 410. You need to buy some more fans for the front however, so factor that cost in when buying it. You can get 2 X 140mm in the front. As an added bonus it's a beautiful looking case!

Used for my first pc build and tbh couldnt have been easier to access everything. Feels a bit light and therefore cheap but the finish is good. The wire slots could be made a tad bigger but I've got big hands so that might be my problem. The open view tempered glass let's the RGB shine

First off this is excellent value for a starter system or cheap build, the air flow is poor so I wouldn't advise a top spec pc be assembled in this case but it's fairly good looking for the price. My only issue with the build was the space for the power supply was poor due to the drive bays location and routing power cables was a pain as the gaps left to route these were awful.

Yes it looks stylish and yes it has a tempered glass side panel and the grey with red accents look cool too and its fairly easy to build in with good cable management but and the but is huge, air flow is appalling... Yep! Appalling, really bad. In my old case i had the same fan set up which is two 120mm fans pulling air in from the front and two 120mm fans in the top pushing air out and another 120mm fan on the rear pushing air out the back and my old case system never ramped up even under load and i have an asus strix R9 390 triple fan gpu and it's fans barely came on BUT in this phanteks case everything ramps up and gets loud as soon as the game credits come on and don't back down til i end the game. It's really badly designed and looks come before functionality. It's so bad that im going to drill as many small holes in the front panel just to let some air into the case.. avoid if you game because this is not a gaming case... Its a cheap microwave oven... Update: so i spent hours drilling a series of holes in a pattern directly in front of the fans and still the heat builds up.. Can't wait to upgrade to a different case..

Great value for money but would recommend buying a few extra fans for the front

Lovely case - just a tad too small to put both a decent large PSU and use the removable 3.5” slots - so it’s one or the other but a nicely built case for the price.

I always wanted to build a computer that would have enought space for all the necessary hardware needed to create videos for family use, like birthdays, weddings and so on, this Mid Tower Case by Phanteks gave me pleanty of room and more, if you look at the photos I posted you will see no wires in the inside of the case and pleanty of room for undisturbed air circulation wish helps the fans maintain the hardware much cooler at a lower speed and therefore run much quieter, also not to meantion a clever magnetic filter screem located on the top of the outside of the case to accommodate the top fan, making it easy to keep clean from the outside.On the top front of the case, it has a control button for led lights that are intergrade into the case to control the power button and the left side panel bottom led lights, this controls the different colors that come with the power button and the side led only, on a black case it gives you that "Night Rider" effect, but what is missing is the movement of the light, sorry got carry away with the show Night Rider.So as I was saying on the top of the case you also have easy access for headset plug and microphone not to mention two USB outlets, wish makes it very convenience.The power supplied and hardrives has its own compartment at the bottom of the case and is one of the reason you dont see any wire plus it helps keep some of the heat of the power supply away from the mother board.The inside of the case is well painted in my case a nice candy red. The front panel is easy to remove, from the bottom just lift out and their you will find on the panel top and bottom a filters for easy cleaning, and on the case front two easy to use hardrive brackets, ah I almost forgot on the right side panel inside the case their a bracket for a SSD drive installation.On the left side it comes with a real tempered glass panel, good for admiring your fans and rams led light plus keeping an eye on your CPU/GPU fans (to make sure they are running).The rear of the case offer plenty of expansion slots to accommodate different ATX motherboard and Graphic card.I love my computer case and I would recommend it to all, the price is resonable for what your getting. The only downside is that they are build in China and are ship to Brooklyng N.Y. it takes about a month to deliver to most states in the US wish made me go crazy with anxiety, but I used the time to do some research on all the hardware and software I was going to need and also, it was hard to find a good graphic card on the shelf of all major stores so that took some waiting time off my back, and all because of, yes you guess it covid 19.

Son la 3 las cajas de Phanteks que monto y son ideales. Mucho espacio, caja y cableado bien diseñado.

Très belle tour pour des moyens abordables, arrivée rapidement et très satisfait, attention néanmoins l'avant de ce boitier ne dispose pas d'une trappe/porte pour accéder a la seconde couche comportant par exemple des lecteurs CD pour les irréductibles ou des card readers la façade est belle est bien lisse.Sinon hâte de monter le pc =) !

Zu Procooling:Während ein paar Problemen bei der Lieferung und einer Verzögerung durch den Versanddienstleister, wurde ich durch guten Support informiert.Procooling hat super unterstützt und versucht mir möglichst schnell zu helfen.Zum Produkt:Die Case war Teil meines ersten selbst gebauten PCs. Der Bau verlief total leicht und sehr angenehm, da die Case sehr viele Vorbereitungen für Kabelführung und gut platzierte Ausschnitte enthält.Die Belüftung funktioniert sehr gut und die Luftfilter sind gut zugänglich und leicht zu säubern.Die RGB Beleuchtung ist ein nettes Feature und der Anschluss von weiteren LED Leisten an die Hülle ist ebenfalls gut machbar.Insgesamt bin ich sehr zufrieden.Danke nochmal an Procooling!

Love the product, didn't come with enough stand-offs for a mATX board though. Plenty of wiring options and ample spots for fans (all 120mm - 140mm). Overall good construction and mounting plate on the backside of the case for a 2.5" drive, has rubber grommets for spinning HDD. The whole thing is red and black, nice coloring, multi color LED setup built in. No inside lighting, just accents around power button and small strip just above the power supply section on the front side with glass panel. Has fan filters for top, bottom and front. Very pleased for the price!