LED Lenser 7799 PT Universal Mount for M5 P5.2 P5E, P5R.2, P6.2, P6x, T5.2

I bought this unit to enable my recently purchased Lenser P7 to be mounted on the front Leg Rest mounting of my sons Electric Wheelchair, to enable him to get the benefit of this great touch at night. It is easy to mount on the chair, and easy to mount the Lenser. It is held securely.It is a Great product, very good price, and delivered as promised. Great Transaction !!

Fitted without difficulty to my Specialized Sirrus using the longer of the two supplied bolts.Offers a secure mount for my LED Lenser P7 torch. No movement and tight fit.Straightforward vertical adjustment by loosening bolt and rotating holder on handlebar; serrated couplings (held together by a rivet) can be carefully prised apart and re-meshed for horizontal adjustment. Probably unwise to do this too often, however, for fear of breaking the rivet.Comes with separate rubber sleeve to ensure tight fit for smaller diameter handlebars.A well made and (hopefully) robust bit of kit.Recommended - but note above comment re horizontal adjustment.

Works well and I like the little strap that goes over the torch to tie it in, especially as this was not stated in the description. All in all a good little product.

Purchase two of these clamps and two Lenser P7's. First off, I cant see how in earth you could use the clamps I received with a P7, its impossible to insert the body of the touch in the cradle of the clamp. The so-called rubberised cradle is ridged unyielding plastic, it is simply impossible to insert the touch. The packaging says it's the correct part number 7799-pt ? As for the holder quality (wrong size or not) this appears to be variable. The rivet fitting other reviewers have mentioned was slack on one holder and very very tight on the other. I have to say looking closely at the packaging and the variable quality of the product and the fact that the two I received were too small these look like fake items. If you go to the Lenser site they acknowledge a lot of fakes out there. I would avoid buying from the market place and stick with Amazon only purchase or go direct to manufacturer (which is what I am about to do).Needless to say both are being retuned.

its a bit pricey for whot it is that said i needed it and it dose the job, i get the feeling it will ware the finish of the torch as i place it in and out of the holder

nice strong clip for the P7, comes with 2 lengths of bolt, and a rubber spacer for narrow handle bars.the 2 parts are riveted together, and take some force to rotate, so will hold angle over very bumpy ground.

I recently bought the LED Lenser P7 and i decided to invest in the bike mount for it. The mount arrived early and has been a very worth while investment. I would strongly recommend the mount to everyone

Was expecting a generic make but is a genuine LEDLenser mount. Fits great on the bike. Holds the torch firmly. Wouldn't want to keep altering the mounts side to side movement all the time as I can imagine the rivet coming loose but once set up its great. I'm using an L7 torch.

Para poner la linterna en la bici

タイトル通りです。現行のP5.2ははめ込むのが固く少し苦労しましたが、問題なく使えます。ただ、届いた商品には見本画像にあったゴム製のベルトが添付されていませんでした。仕様が変わった?

De bonne qualité, comme la lampe de la même marque.Utilisé sans problème et descente à grande vitesse, la lampe est tenue avec fermetée.

La parte superiore del supporto è in ottima gomma. Può essere ruotata rispetto alla base e mantiene fissa la propria posizione. E' quindi possibile montare l'attacco in posizione decentrata e centrare in seguito il fascio luminoso rispetto alla strada. Il gommino di sicurezza garantisce contro lo sfilaggio della torcia elettrica in modo ottimale. Il fissaggio inferiore si effettua avvitando una manopolina a tre alette (con dado in metallo e rivestita di plastica nera) sul bullone a testa tonda. Probabilmente sostituirò la manopolina con dei bulloni fissi, per evitare lo smontaggio veloce da parte di qualche malintenzionato.

Erster Eindruck: Das darf doch wohl nicht wahr sein. Nach den vielen positiven Berichten hier war ich vollends überzeugt, einen soliden Fahrradhalter für meine T7 gekauft zu haben. Und dann das: Das Oberteil und die untere Klemmschelle waren so locker miteinander vernietet, dass die Rasterung kein Bisschen gehalten hat. Die Lampe hätte sich beim Fahren lustig hin und her gedreht, wie ein modernes Kurvenlicht, nur eben völlig unkoordiniert. Doch zum Glück konnte ich den Halter problemlos reklamieren und erhielt prompt Ersatz.2. Halter: Das Strahlen in meinem Gesicht beim Auspacken hält jetzt noch an! =) Die beiden Teile sind solide und straff miteinander verbunden, kein Wackeln und kein Klappern. Montage am Lenker werkzeuglos per Hand. Ob das nun gut oder schlecht ist (Diebstahl), muss jeder für sich entscheiden, ich habe die Handschraube gegen eine mit Innensechskant getauscht. Nach den ersten 10km Nachtfahrt mit dem MTB bin ich absolut begeistert, jede Menge Licht genau da wo ich es haben will. Kein Rutschen, kein Nachstellen, die Lampe sitzt bombenfest. Empfehlung!!!