🚗 Light Up Your Adventure with Auxbeam!
The Auxbeam 9007 Fog Light Q25 Series delivers an impressive 20,000 lumens of brightness with a quick 3-minute installation. Designed for off-road use, these bulbs feature a waterproof design, advanced heat dissipation, and compatibility with 99% of vehicles, making them the perfect upgrade for enhanced visibility and safety.
Brand | Auxbeam |
Specific Uses For Product | Fog Lights |
Vehicle Service Type | ATV, Adventure, UTV |
Special Feature | Waterproof |
Wattage | 70 watts |
Auto Part Position | Front |
Assembly Required | No |
Manufacturer | Auxbeam |
Item Weight | 9.1 ounces |
Package Dimensions | 5.16 x 5.08 x 2.44 inches |
Item model number | 9007 |
Exterior | Polished |
Manufacturer Part Number | Q25-AP-9007 |
Special Features | Waterproof |
Lift Type | manual |
R**D
Excelente luz
Excelente inversion
E**K
Nice lights. Easy Install.
Bought these for my 2004 Mustang. I have smoked lenses, and the current bulbs are Hella 80/100 High Wattage. The Hellas did okay with the smoked lenses but get VERY hot to the point you could feel it on the front of the headlight. I have my headlights on a separate relay harness with ceramic connectors just to be able to run high wattage bulbs. I've had them for about 2 years and decided to try some of the newer LEDs as that technology is really starting to mature for automotive use. What I don't want are lights that are too blue or with a lot of light scatter. There's no need for me to blind oncoming traffic!I chose the Q25 series because it's all in a standard bulb size package. No bulky boxes to hide. The bulbs promise 500% brighter light and a 6500K color temp. 6500K is borderline blue with some lights as they creep towards 7000K+, so I was hoping these would be somewhere more towards 6000K. I'd prefer something even lower without going bright yellow but couldn't find any in this form factor yet. Install was simple. I removed the Hellas and installed the Auxbeams with the longer side of the pointed end up and locked the bulb into place. The most difficult part of the install was putting the ring that holds the bulb in place back on, and it had nothing to do with the LED. It was just as much of a pain when I put regular bulbs in.You can see from the pics, the Hellas are a bit brighter, but I believe that has more to do with the lower color temp and the lack of a good cutoff. The light pattern is more an issue of the headlight assembly than the bulb, though. The Q25s have a nice sharp cutoff in comparison.I took a couple of pics in a neighborhood street and on a long dark road with the low and high beams for comparison.Overall, these lights aren't bad. I'm not sure I would call them 500% brighter as my Hellas were supposedly 150% higher, and these are not much brighter (if at all) than the Hellas. You can see that the lights do look more towards blue when there is more ambient amber light around, but in the dark, they look more towards daylight white and provide good illumination. As far as heat, these do not seem to heat up the front of the headlight assembly like the Hellas did, probably owing to the built-in fan blowing the heat to the rear.I can't speak to longevity yet but assuming the bulbs go a couple of years, I'd buy them again.
B**S
Easiest to install LED conversion bulbs EVER
I have used quite a few Auxbeam products in the past, actually converting a few of my cars and customer vehicles with these products. (retired mechanic, Service Writer, and business owner with 50 years experience)The particular vehicle I used this set on is slightly tricky to upgrade because it uses a thick retainer ring that is impossible to install on most aftermarket 9007 LED bulbs because it won't fit over the fan housing. I have found and used sets in the past, but this set is almost just like installing a regular halogen bulb. Frankly I'm amazed at how they made this bulb almost the same size and dimensions as a regular bulb.Output is good, and about what you would expect from a quality LED bulb. Frankly we haven't driven the vehicle that much, and I was waiting until we did before listing a review, but I decided to get some timely comments since it has been awhile since I received this product.I'll get some beam shots and post them when I can. It's hard this time of year with light until 9:30 PM!Beam quality and cut off seems to be good. Brightness is of course much higher than a stock halogen, and the color is what appears to be 6500K as listed.The vehicle (a Chrysler product, Jeep Liberty, which sometimes has trouble with some brands requiring decoders) had no problems with these lights, and I did not need to use a decoder. (I actually was able to remove the decoders that I had in place for the bulbs I was using. Nice)Nice lights from a company that puts out a good product.
R**D
Nice replacements for factory 9007 halogen bulbs
These were installed on a 07 F250. It's not the funnest car to replace headlights on but that's not the bulb's fault. These LED's were the same size as the OEM ones, which is good, as longer bulbs might be a lot trickier with the plastic cylinder Ford uses to keep the bulb in place. These were notably brighter even in middle of the day and made a huge improvement over the factory halogens. Big thumbs up.
B**L
What a difference!
I really like how these really improved our vehicles headlights. I went from not wanting to drive at night to no worry at all when I drive. Perfect fit, installation will very from car to car.
M**C
Nice upgrade
Converted my halogen lights to these and wow, it's a very noticeable difference. Great product.
A**J
Great Bulbs
Fit my truck just like they said it would, I will be able to see at night!!!
S**R
Had some issues with tightening down
Used it on a 2000 Subaru Legacy, and one side fit fine but the other side I had trouble tightning down the locking ring. The locking ring feels loose. The ring tightened fine on the oem light.
Trustpilot
1 month ago
2 weeks ago