Osmo - Polyx-Oil - 3051 Raw - .75 Liter

Great natural finish I used on my bunk bed project. Easy to apply, low oder. A bit pricy but worth it. Kids and wife happy with the results.

I heard about this online to preserve the color of ash. Worked as expected, but I applied the first couple boards too thick. A foam roller worked best for me, wiped off excess after about 10 min. The boards on the left are untreated, right are immediately after oiling, once dried they were almost impossible to tell which side we oiled. I used 3 cans on our ceilings (40x12 room and 7x20 room) I used a 4th can on all our red oak trimwork to lighten it a bit. It not noticeable, but it didn't yellow like a poly would. There is absolutely no sheen to this at all.

I wanted this school desk to appear like unaltered maple wood. (See before and after pictures.) I tried numerous other waxes and finishes only to find they all altered the wood whether darkening or changing its color. Not Osmo! I learned about Osmo from a professional woodworker I watch on Youtube. I used not quite half the can on this table and the cubby underneath it, but I did not apply it to the bottom of the tabletop as I had not removed the original finish from it. A second application is necessary. Pros: It is easy to apply, and the finish is easily the smoothest I have ever attained (I have done dozens, if not more projects). I used a four inch microfiber roller to apply. It is thicker than stain and therefore, stayed in the area I applied it. I can't say enough good about this product. Cons: It is expensive. Also, I put a little too much Osmo on one side of the top and did not realize it (first time user) which gave it a slightly white cloudy look, so it is best to avoid putting too much on the wood or it may appear white. (It can easily be "thinned" on a project by spreading it out on the wood.)

Works great and looks great on my kitchen island slab

It really looks natural, no orange shading. Very pretty.