Dual Monitor Mount Ergonomic Perlegear - Full Motion Monitor Arm Gas Powered Height Adjustable Swivel Tilt - VESA 75-100mm Fits Two 15-27 Inch LCD Screens, Each Arm Holds 8KG - C Clamp Desktop Mount

This thing is god damn wonderful. I'm a mechanical design engineer by trade and this thing is just beautifully engineered. Everywhere, every aspect. I examined it before building and found absolutely nothing I disagreed with or felt had been omitted/missed.It's rock solid, has been designed for efficient movement with sliding bearings all over the shop, and still maintains the ability to control the tension for just about every axis of movement possible. The finish is exceptional, the choice of manufacturing techniques is spot on, everything about it is just beautiful.If I have to find something to criticise, it's this one thing: the cable management option on the inner arms is a bit stiff and it's difficult to push the cables inside. It's a grommet-style 'two flaps' that you push the cable between, and it's made from a fairly stiff plastic. I had to get a little flathead screwdriver to pry the flaps apart enough to get the cables in more easily, so... yeah. No biggie.Oh, and I wish it had a bit more height on the pole to facilitate better one-up-one-down positioning of monitors. That's it.I have it holding a 34" ultrawide on one arm and a 24" above it. This all fits on the desk but results in the bottom monitor being too low for me as it's my main view, so raising that up I find I can't get the top monitor high enough. It's all done with standard inch and a quarter fittings though, so it's going to be very easy to extend the main pillar enough to get my top monitor a bit higher.Love it.

Brilliant gas powered arm, super easy to install, and really adjustable. I put on the corner of my desk, the clamp feels super strong and tight. I have 2 monitors mounted, one 21'' and one 27'' (heavy weight) and the arms locked it down firmly. Again, with the gas power and the spring, you can adjust almost in any position. This a VESA mount, 100 and 75 so that should cover most cases. Good work form Perlegear, really impressed by the quality and definitely value for money

Works great!Super sturdy no worry if my screen fallingAdjustable pressure for heavier and lighter screen!Slight issues with have one mounted above the other! As arms up and down have some issues on distance apartBut other than that amazing product would highly recommend!

I was looking for a dual mount that would offer a lot of flexibility and reach. My only slight niggle about them, and it really is only slight, is that they can be a little fiddly to install. But that could me more to do with my table and monitors (having 2 large 27" monitor). Apart from that I love them. Love the way you can adjust the tension on the arms closes to the monitor of offset the weight of the monitor itself. Thus making it so easy to raise and lower them. Loads of adjustments you can make to lock the arms into position should you wish to. All is all, so far, very happy. And not a bad price compared with comparable mounts.

I've only had this a couple of days, easy to assemble. Solid looking unit.2 x 24" Panels fit side by side nicely, I've yet to really experiment with different positions but overall I'm quite happy.Delivery was rapid and communication good.** UPDATE ** Took a star off as it's tricky to use - I'm still happy enough with it but the gas powered tilt feature doesn't appear to lock in position so whilst i can move screens about in an up and down direction I'm not able to lock them there. The only usable option is with the two screens locked at rest - not a disaster but I'm a bit disappointed. If I figure it out, I'll update the score accordingly

The media could not be loaded. Bought the arms, only 1 of the 2 arms work (as you can see in the video). I then bought another set, to test more arms, and BOTH those arms also didn’t work. So of the 4 arms I have, 3 don’t work. I tried every combination of monitor and screws, and it was definitely the arms that are broken. Very poor quality control.

A very pleasing purchase, clearing "stand clutter" off the desk, allowing me to raise the height and position the screen more precisely. Buyers do need to consider the space required behind their desk for the arms. I hoped to be able to flatten them more, but they need to stick out behind the monitor quite a long way for correct positioning. Also the cable management helps to make a neat job of the installation, BUT if you have HDMI + DisplayPort + Power + USB + ... you will find the cable restraints struggle to hold all the cables, max 4 per upper arm. Because my cables are not infinitely long, I can't afford the length to run them through both upper arm ties and through the lower arms where they press into the arm. I can reach through just the first tie, and then across to the last vertical clip, which has capacity for 5 cables from two monitors. The overall effect is neat and as the product says "ergonomic".

Bought to support a pair of 27 inch LG 4K monitors and I haven't been disappointed. I've seen this particular item under a few names but all credit to Perlegear for supplying it at a very good price here on Amazon UK, and I'm sure Perlegear have excellent customer support as well.Build quality is very sturdy and the amount of positioning variations is enormous. Very quick and straight-forward to assemble, albeit I used the desk clamping method.I'd say the cable management could be improved, it's hard work on the lower arms with any sort of decent quality cables and a bit messy on the upper section arm with the clips.The 'T' support piece that fits over the stainless centre column will always want to move no matter how tight you do up the hex screw and loosen the arm hex screws.Still, all in all I'm extremely happy with the product