BACOENG 3.6CFM AC Vacuum Pump and Gauge Set - HVAC Vacuum Pump Kit for Mini Split System for R410A R22 Refrigerants - w/ R410a Mini Split Adapters & 3x5FT Hoses

This worked very well for my minisplit install but I was using it in direct sunlight and it was 106°. The unit's circuit breaker tripped after about an hour. I don't blame the unit since my internal circuit breaker was about to blow too. Who knows, maybe it saved my life. 😆

The Bacoeng R32 vacuum pump is mighty! It pulls a vacuum in a very reasonable period of time, and runs impeccably. I am impressed. It has no problems going to 100 Microns, evacuating the mini split system with ease. The hoses are of excellent manufacture, the included analog gages are well built and the carring bag is icing on the cake. This Bacoeng R32 vacuum pump kit should serve any serious DIY well. I

Packaged well. Pump works well out of box. Very quiet while running. Gauge set looks a little cheap but gets the job done. Not bad for price. Would recommend for someone who is only looking for something to work for a few jobs. Not for long term use at this price point.

Performed vacuums on 4 or 5 mini Splits with this without any problems. Good little set of gauges and vacuum pump. Does not leak also ran some nitrogen pressure test through these at 300-300 psi a few times they are accurate. This is compatible with minisplits but you will need the adapters. Great starter set for DIY guy.

This pump is great. I was able to refill vacuum the air out of the 2 mini split systems I have, & 1 of them, I had to send back, meaning I had to vacuum the refrigerant back down to the condenser; I did this all with no experience & no problem! The accessories it comes with, including the bag, is great!..

I had ordered a mini split and was just going to use a can of Kwik e-vac but ended up bending and kinking a refrigerant line a little to much and didn't want to take the chance of it failing. So I ended up buying a flaring tool and redoing the lineset thus purchasing this unit to verify that my connections were good . I found a good video on YT on how to use these and this one has been great . I have since used it for two more mini splits and for the price of this vacuum pump,it's 100% worth it just for the confidence and knowing that when you release the refrigerant ,as long as you have verified vacuum and checked everything , that you should have no problems. It came with the adapter for the smaller r410a connection also. Everything fits nicely in the bag and it functioned perfectly. Honestly , spend the money for a vacuum pump just for the extra reassurance as it is less than hoping for the best and then finding out you have a leak and need to evacuate and recharge the system. This worked great for me and I'm really glad I ended up purchasing it as I've used it 3 times already and If I know someone who is installing a mini split , I will be able to use it again . Highly recommended.

So I bought this to instal my new mini split. First time all went well it pumped down to 500, then I relised i had my meter on the wrong gauge center manifold port going to the pump, so started over after correcting by changing micron meter to the blue side. Then it never would get to 500, stalls at 1700 and even rises. I notice when I turn the blue gauge off it lets all the vaccume out almost instant? I'm not an expert at all, but that can't be right? Closing it shouldn't make it lose(or gain in this case) pressure, but it does. I'm frusterated but will edit after I contact the seller. Now I dont know if it's the pump and or the gauges or if it's something else entirely. I suspect gauges for sure for one thing. This wasn't as easy as I thought it would be.

Worked great to vacuum down mini split lines. Only took a minute or two to pull a deep vacuum. Quieter than I expected too. Wasn’t expecting the nice bag that came with it but that is nice too.

Well made ,sold through Amazon in uk but absolutely will not work in uk ,110 v not 240v here in uk,so unless you have a spare 110 v transformer knocking about do not buy in uk .

110 volts. Beware if you are in the UK